similar to: snmp question v3

Sorry, I just now figured out how to get a usable output. -Option one doesn't work at all for me. snmp_build: unknown failuresnmpget: Error building ASN.1 representation (Can't build OID for variable) COUNT = 0 / 0 Creating /usr/share/snmp/mibs/ups-mib.txt-mib.h Creating /usr/share/snmp/mibs/ups-mib.txt-mib.c Done. -Option 2 is attached. I ran the following to get the output. snmpwalk

2014-02-26 1:45 GMT+01:00 Jason R Begley <jayray at digitalgoat.com>: > Sorry, I just now figured out how to get a usable output. > -Option one doesn't work at all for me. > > snmp_build: unknown failuresnmpget: Error building ASN.1 representation > (Can't build OID for variable) > COUNT = 0 / 0 > Creating /usr/share/snmp/mibs/ups-mib.txt-mib.h > Creating

Hello, I'm wondering if anyone else is seeing the same issues I'm seeing here. I have recently upgraded one of my systems from 4.4 to 4.5 and ever since then I cannot get snmp to work. I am monitoring the interface traffic. Please keep in mind the firewall/router I do the same thing without any issues for 4 interfaces and it is still at 4.4 and doesn't have any issues. If I

Hi I''ve patched net-mrtg http://www.net-snmp.org/ with http://x-ray.prokon.cz/data/snmp/ sucefully Also I''ve copied QOS.TXT to /usr/local/share/snmp/mibs when I make a normal use of snmp, with mrtg in order to monitor all traffic on eth0 and eth1, it works OK. But, how must I do in order to get monitor for a specific class ? If I make a snmpwalk (like README suggest), I get

Hi ALL, I am trying to use the SNMP extension of michel http://x-ray.prokon.cz/data/snmp/ i pached the snmpd damon as mentioned in the README but when i run "snmpwalk -c community target enterprises.18756" i get this error "snmpwalk: No securityName specified (Sub-id not found: (top) -> enterprises)" any idea ? Thanks , venkat

I'm trying to get SNMPv3 management working for an APC AP9617 card. It is newly refurbed, running sumx v3.7.2 and aos v3.7.3. In the SNMPv3 user profiles section I have (I don't care about the password leaking, it's temporary): User Name: nut Authentication Passphrase: NutScan at Password43LongerWord Privacy Passphrase: NutScan at Password43LongerWord Authentication protocol:

Thanks, now I started getting messages from the list. As you advised, I renamed the mib file NETCARD.mib to Tripplite and ran command ./gen-snmp-subdriver.sh -H 10.200.254.39 -c public -n Tripplite Here is what it says: snmp_build: unknown failuresnmpget: Error building ASN.1 representation (Can't build OID for variable) COUNT = 0 / 0 Creating tripplite-mib.h Creating tripplite-mib.c Done.

Posted this to xen-users back in Oct (http://www.gossamer-threads.com/lists/xen/users/186768), but just confirmed that I''m still seeing this behavior on 4.1. Polling the UCE-SNMP-MIB::ssCpuRawIdle counter results in a total that''s double the actual number of cpu''s on the system, so for example: nms ~ # snmpwalk -v 2c -c ''XXX'' xen1

[Please keep the list CC'd. Thanks!] On Feb 13, 2014, at 4:55 AM, ??? ????? wrote: > Can you try adding "-v 1" to the snmpwalk command? If that works, we can add it to gen-snmp-subdriver.sh. > > Yes, I tried it before, ran command "snmpwalk -v 1 -On -c public 10.200.254.39 .1.3.6.1.4.1.935" > > Output: > .1.3.6.1.4.1.935 = NULL > Error: OID not

I'm wondering if it is possible to use SNMP to query a NUT instance running on a Raspbian Linux host. Please note, I am NOT talking about querying a UPS via SNMP, but rather interrogating NUT *about* the UPS from another SNMP system. Currently, when I do snmpwalk talking to the NUT host, all I see is very limited information (location, hostname, etc.) So I know SNMP is running and

Hi all, I hope someone can help me with this one. I'm trying to graph all traffic on the localhost's network card with Cacti. >From what I understand I should use SNMP to query the traffic, but I can't seem to get SNMP info for the network interface. I have installed all the necessary snmp tools, "yum install snmpd net-snmp net-snmp-utils net-snmp-devel net-snmpt-libs "

I missed that snmp-ups set pollfreq to 30 by default. I'd hope that it would set deadtime to an appropriate value as well than, no? Is there a way to query what the settings are or what the defaults are? I'm going to set POLLFREQ=30 and DEADTIME = 90 and see if that has any effect. I'll check for the logs. And if that doesn't get my anywhere I'll look at trying to simulate

OpenBSD 5.6 nut-2.7.2 (bin package) Liebert IntelliSlot Unity Card IS-UNITY-DP ups.conf: ...... ? mibs = ietf ? snmp_version = v1 ...... The problem is that the card responds to other snmp (v1,2c,3) requests normally but not to the 1.3.6.1.2.1.33.1.1.1.0 (UPS-MIB.upsIdentManufacturer). # snmp-ups -a laes2ups -DDDDDDD Network UPS Tools - Generic SNMP UPS driver 0.72 (2.7.2) ?? 0.000000???? debug

[please use Reply-All to keep the list CC'd, thanks] On Mar 30, 2015, at 11:04 PM, Jason Gould <jgould at cddiagnostics.com> wrote: > Thanks. I should also mention the freenas server is setup with an lacp lagg. > > I will also mention that even when not setting pollfreq (leave as default) the issue still occurs. > It looks like the default for pollfreq is actually 30 on

I'm trying to use snmpwalk to look at other machines, but I can't get a response. It keeps timing out. It can see itself, though. I haven't had this problem with other machines and I don't know what's different. Suggestions? -------------- next part -------------- An HTML attachment was scrubbed... URL:

On Feb 25, 2014, at 4:23 PM, Arnaud Quette wrote: > gen-snmp-subdriver.sh simply hasn't done its job, for some reasons. > well, 1 clear is that's it not a completed effort... at all > but, still IIRC, it should have produced at least a bit more Hi Arnaud, I may not have been specific enough in my description. The crash that Jason saw is with the version of snmp-ups that is

Hello, Can someone explain why I don't get a timeout when I use the community string "public" even if I don't have it defined in my snmpd.conf file. It doesn't return data but it also doesn't timeout. See example below. ... rocommunity nobody 127.0.0.1 ... [root at L703108 pgsql]# snmpwalk -v 1 -c public 127.0.0.1 1.3.6.1.2.1.2.2.1 ifMIB [root at L703108 pgsql]#

2014-02-25 12:58 GMT+01:00 Charles Lepple <clepple at gmail.com>: > On Feb 24, 2014, at 11:48 PM, Jason R Begley wrote: > > > 0.073855 load_mib2nut: trying classic method with 'delta_ups' mib > > 0.073878 Entering nut_snmp_get_str() > > 0.073899 nut_snmp_get((null)) > > 0.073918 nut_snmp_walk((null)) > > Arnaud, > >

Hi All, I have a C6 (latest patches) physical machine that I use for network and server monitoring, predominantly over SNMP. It is on VLAN80. My network management interfaces on the switches are on VLAN50 with routing between the VLANs. I recently changed the router to a CISCO ASA 5505 (reasonably recent IOS version, certainly post HeartBleed), with the management interface on a higher

Hi, I'm thinking about adding support for PDU (Power Distribution Unit) devices from Digipower [1] and Aviosys [2] to NUT via the SNMP interface. The specific devices I have in mind are the following: Digipower AMz-1623/SW-08-1 Aviosys IP Power 925x (both are 8-port PDUs which are SNMP capable via an ethernet interface) Does anybody have other DigiPower or Aviosys devices and if so