similar to: Slightly OT: Dell Poweredge 2850 with 4GB RAM

Hi all, Am I the only one to have had a totally trouble-free upgrade to 5.2?? I get the feeling that most everybody seems to have *some* problems... -- Best Wishes Sorin --------------------------------------------- http://home-skynet.servehttp.com/ Proud member of TEAM OS/2. Mountainbiker [Kona Kilauea - Member of Equipe Les Cafards VTT] Motorcyclist [Honda VFR750F-'97]

Hello All, I encountered the same problem as reported to this list earlier, http://lists.freebsd.org/pipermail/freebsd-stable/2009-February/048305.html, but then with 7.1-RELEASE-p4. Interestingly enough, FreeBSD booted fine on the machine installed (updated from 7.0 to 7.1-RELEASE-p4). This machine is a PowerEdge 1850 bios A04 with Perc 43/Si bios H430 / fwVer 521S. When booting a drive

Hello I have a problem to boot my xen kernel, I have a debian sarge 3.1 stable, download xen-3.0.2-src.tgz, extract and compil it with the command "make world" But at boot I have an error : "cannot open root filesystem sda1" My raid controler is a perc4/di raid 5 controler lspci -v said : 0000:02:0e.0 RAID bus controller: Dell PowerEdge Expandable RAID controller 4 (rev

Hi There, I get the following error from the code pasted below: Error in storage.mode(test) <- "logical" : object 'HGBmt12_Natl_Ave_or_Facility' not found library(RODBC) library(car) setwd("c://temp//cms") a07.connect <- odbcConnectAccess2007("DFC.accdb") sqlTables(a07.connect) ##provides list of tables## dataset <-

-----Mensaje original----- De: Mario Montiel [mailto:mariomontiel@grupocsi.com.mx] Enviado el: Viernes, 26 de Mayo de 2006 10:29 p.m. Para: Asterisk Users Mailing List - Non-Commercial Discussion Asunto: RE: [Asterisk-Users] DELL PowerEdge 2850 and TE4110P and TE110P I have many problems with this server and two cards TE4110P, because after several minutes one of two cards stays out without

I am trying to get the temperature of a Poweredge 2850 with CentOS 6.3 on it. Has anybody on this list done this successfully? Thanks -Surya PS: Apologies for cross posting if you are on the Poweredge list. -- Surya Saha Department of Plant Pathology and Plant-Microbe Biology Cornell University, NY, USA http://www.linkedin.com/in/suryasaha

Did anyone manage to have xen (3.0.1 stable) run on this config? (this is on FC4 if it matters). I''ve tried recompiling the xen0 kernel with the Fusion options from my current kernel added, but it keeps removing some of them (maybe some that didn''t exist yet in kernel 2.6.12), and it seems I end up without the correct driver. If someone has this running, I''d be

It's Digium, not Dell. I have two identical Dell 1850s, each with the allegedly offensive built-in E100 Ethernet ports. I placed a TE410P card in each. One worked great, the other would not modprobe. Upon examination, we discovered that the two TE410P cards had different firmware revisions. Turns out the one with the older version was the one that worked. We sent the second card back

Hello, Just chiming in here: >From: asterisk-users-bounces@lists.digium.com >[mailto:asterisk-users-bounces@lists.digium.com] On >Behalf Of >bdolljr@bigskytech.com >Sent: Viernes, 22 de Julio de 2005 01:24 p.m. >To: Asterisk Users Mailing List - Non-Commercial >Discussion >Subject: RE: [Asterisk-Users] Dell Hardware >> Mmhh nice !! So, why did Digium forbid it :)?

r> <h2>Polycom Phones (updated for 3.2.X firmware with asterisk 1.6.1 Jan/2010= ) </h2>With SIP 3.2.X firmware (available on the Polycom download site)=20 and Asterisk 1.6.1, Polycom phones now support a full featured BLF=20 showing statuses of Ringing, Inuse and Online and one touch directed=20 call pickup. <br>On the asterisk side all that needs to be done is to add a hint

Hi all, We are running Asterisk 1.2.7.1 on our Dell Poweredge 2850 and are having massive sound quality issues. We are experiencing call quality issues for our remote location, namely calls cutting out and breaking up for our agents. The two main issues seem to be 'popping' and 'dropping' - popping would be pops and crackles on the line, where dropping would be complete audio

Yes on optiplex 790 i upgraded from A07 to A18 (there was a nic upgrade) but it didn't change anything.. On optiplex 380 i upgraded from bios A01 to A07(don't know if upgrade contained pxe or not)... I tried, lpxelinux.0 and it wasn't faster. Only v4.07 helped on these machines. Tomorrow, i will give a try with 6.03pre2. In wireshark, i saw no errors, the packet length was the

I did some additional tests : On a dell optiplex 380, i disabled internal nic, added a 3com 905c tx external pci nic : very slow too. On a dell 740(which is always fast), i put the 3com to be sure : very fast. So it seems it is not related to the nic itself. To be sure it wasn't just one failing computer i tested several 380. I tried disabling several features in bios, like Execute

Hi, recently I came across a deal on a bunch of Dell PowerEdge 2850 servers and I was hoping to use them to run Debian with Xen to provided virtualization support for Windows 2003 and other Debian installations. I was hoping to install 2 copies of Windows 2003 as well as 2 copies of Debian all on top of the DOM0 Debian installation. The servers have dual 3.2ghz CPU''s and include 16GB

Hi All Before I go out and buy a DELL PowerEdge 2850 has anyone had problems (or any other useful experience) getting a TE411P to work with it. I also have a legacy TE110P. Has anyone had problems with this combo. -- Dr. Rodney G. McDuff |Ex ignorantia ad sapientiam Manager, Strategic Technologies Group| Ex luce ad tenebras Information Technology Services | The

Hello, Digium uses the Dell PE 2850 for their testing. This site says that 3.3V PCI slot. http://www.voip-info.org/wiki/view/Asterisk+hardware We are planning on purchasing a Dell PE 2850 and putting a TE205P card on it. However, the needs a 5V PCI slot. Does Dell PE 2850 has a 5V PCI slot? A person in our group tried to call Dell's customer support but they do not seem to know.

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I am having trouble with one Dell system and pxelinux: The keyboard does not properly work. The computer boots, I press F12 to select the boot device, then I select the network card. Up to that point the keyboard works fine. Then pxelinux is booted, and I use menu.c32 to display a menu (or vesamenu.c32 - same result). Now the keyboard does not

Morning All, I upgraded from 9.2-STABLE to 10.0-PRERELEASE #0 r259144 last night and I am now getting this every 2 seconds in /var/log/messages: Dec 10 07:54:31 Shop kernel: ata1: FAILURE - zero length DMA transfer attempted Dec 10 07:54:31 Shop kernel: ata1: setting up DMA failed cat /var/log/messages | grep ata1: cd0 at ata1 bus 0 scbus3 target 0 lun 0 cd0: <TSSTcorp DVD-ROM TS-H352C

============================================= [ INFO: possible recursive locking detected ] 3.17.0 #50 Not tainted --------------------------------------------- Xorg/1170 is trying to acquire lock: (&dev->struct_mutex){+.+.+.}, at: [<ffffffffa010ae93>] i915_gem_unmap_dma_buf+0x33/0xc0 [i915] but task is already holding lock: (&dev->struct_mutex){+.+.+.}, at:

We need ww mutexes and need to rewrite i915 a bit fo fix this all. I.e. known issue. As long as your userspace isn't nasty nothing bad will ever happen though. -Daniel On Mon, Oct 13, 2014 at 08:40:33PM +0200, Marcin ?lusarz wrote: > ============================================= > [ INFO: possible recursive locking detected ] > 3.17.0 #50 Not tainted >