similar to: Request for additional patch in CentOS Plus kernel

Hi, Does anybody has any experience with e-sata on CentOS5.2? - How fast is it? Same as an internal sata? - Does it support sata-2? - Does it "hot-plug" like a USB? -- Thanks http://www.911networks.com When the network has to work

I'm looking at buying a NORCO DS-1220 and it comes with a NORCO 4618 PCI-X card (4 port eSATA, with a port multiplier on the card or the chassis). I've been trying to pin down whether or not CentOS will see all 12 drives, and I haven't seen anything that is definitive. I see that the kernel module sata_sil24 supports the SiI3124 chip on the NORCO 4618 card, but I haven't found

Hello, Similar to others I have freezeups on the system, it is consistent with high IO load. If the system runs (even with multiple) XenU it does not happen. But I can consistently force the situation to occur. Running 4 dd processes dumping 20GB each on a LVM/mdadm soft RAID5 volume it consistenly crashes in a DomU. Running without XEN I do not see the problem at all - (e.g. after about 3TB of

Dear Devs, I have x4 4TB HDDs formatted with: mkfs.btrfs -L bu-16TB_0 -d raid1 -m raid1 /dev/sd[cdef] /etc/fstab mounts with the options: noatime,noauto,space_cache,inode_cache All on kernel 3.8.13. Upon using rsync to copy some heavily hardlinked backups from ReiserFS, I''ve seen: The following "block rsv returned -28" is repeated 7 times until there is a call trace

Hello, I'm looking for a recomendation for a SATA controlers. In the range of 4-8 ports, either PCI or PCIe (for desktop use) and/or PCI-X, PCIe (for server use). I'd especially like it if the Linux driver was already in CentOS or easily added. Everytime I find something interesting, a google search shows up either the drivers is for 2.6.30 (ie, not CentOS), someone tried it and it was

Dear nouveau developers and users! After many years of dealing with the blob in my kernel, I decided it was time to move to an open source solution. With one of my machines, equipped with 9500GT it went almost flawlessly. I had to patch kernel to get GLXVBlank option working (only because I used the latest and greatest 3.7-rc6), but that is all, and I'm very happy with the result. Nouveau on

testing, uname -ri 2.6.33-rc5-4-xen x86_64 rpm -qa | grep -i Xen-4 xen-4.0.0_20873_01-29.1.x86_64 cat test.cfg name = ''test'' builder = ''linux'' bootloader = ''/usr/lib/xen/boot/domUloader.py'' bootargs = ''--entry=xvda1:vmlinuz-xen,/boot/initrd-xen'' disk = [

I've two machines with almost identical hardware (slightly different CPUs). The SATA/RAID controller is SiI 3114. One of the servers was installed a while ago by someone else, it's running Fedora Core 5 and RAID is enabled: # df -m Filesystem 1M-blocks Used Available Use% Mounted on /dev/dm-6 125931 2990 116441 3% / /dev/dm-1 99

Hi, My asterisk server was working with a 4-FXO analog card (TDM400P). I recently added two digital cards: a TE120P (1 PRI) and a B410P (4 BRI). The B410P is still unconfigured but inserted in a PCI slot. The TE120P's jumper is set to E1 as it will connect to a commercial PBX's PRI card also configured as E1. My analog channels used to be 1-4 but since I added the new cards I changed

https://bugs.freedesktop.org/show_bug.cgi?id=102192 Bug ID: 102192 Summary: Dell XPS 15 9560: PU: 1 PID: 58 at drivers/gpu/drm/nouveau/nvkm/subdev/mmu/gf100.c:190 gf100_vm_flush+0x1b3/0x1c0 [nouveau] Product: xorg Version: unspecified Hardware: x86-64 (AMD64) OS: Linux (All)

i''ve external storage (2 x 1TB drives) attached via a Multilane SATA + RAID card (driver:sata_sil24). my goal is a file server in DomU, serving files from a RAID array of the two drives. my Dom0, fwiw, is OpenSuse 11.1. 3 types of file service will be provided: - large, media files will be served to the LAN - active data files will be served to other DomUs over a private bridge - a

Hi list I'm havining problems with a E1 Digium Card (TE120) here are the description of the problem: Case 1: Zaptel 1.4.8 Kernel 2.6.22 The system start working correctly, but aleatory the asterisk prosess give a kernel panic with the messages: Process asterisk (pid: 7321, ti=dfed6000 task=f7dbf030 task.ti=dfed6000) Stack ......

Does CentOS support NCQ on SATA drives? If so is there something I must do to turn this support on? Matt

What does the CentOSPlus kernel have that the standard kernel does not? It is just additional drivers and modules? Or are there additional differences? -- Robert Heller -- 978-544-6933 Deepwoods Software -- Download the Model Railroad System http://www.deepsoft.com/ -- Binaries for Linux and MS-Windows heller at deepsoft.com --

Tired of "little problems" trying to keep 7 drives working in an old desktop computer, I'm considering an external SATA drive enclosure with a controller card based on the Sil3124. http://www.ipcdirect.net/servlet/Detail?no=152 I'm a bit concerned about long-term support, namely that the company's driver page only lists drivers through RedHat 4.

Hello, Today I built a custom kernel in CentOS 5 following the instructions on this page: http://wiki.centos.org/HowTos/Custom_Kernel It's excellent, but I have some remarks I would add: 1. %define buildid .your_identifier In the commented line, there is a space after the % sign. You have to manually remove this space. I think someone was bit by this a short while ago. I think making this

Ok, got a quickie. I have an eSATA drive, a 750GB Seagate in an eSATA external enclosure, and a Silicon Image sil3132 ExpressCard controller for my laptop. The disk and controller work great in CentOS 5 (or F7, for that matter), if I specifically mount it. This is not how I want to have to use this drive, however. I want to hotplug it; that is, plug the controller into the laptop, and then

https://bugs.freedesktop.org/show_bug.cgi?id=101553 Bug ID: 101553 Summary: [ 8.944203] nouveau 0000:01:00.0: DRM: failed to create kernel channel, -22 Product: xorg Version: unspecified Hardware: Other OS: All Status: NEW Severity: normal Priority: medium

Hi, I'm looking for a good e-SATA card, preferrently one that is supported by Linux with built-in drivers (no need to compile the modules from the vendor), or at least that the vendor's drivers are packaged with dkms or something similar that makes it easy on kernel upgrades. It's essential that the card supports hot-plugging, because we want to use it to plug backup drives and have

I'm running Samba 3.4.7 on Ubuntu 10.04. This is a recent upgrade and we've starting experience a sporadic problem after this upgrade. When users are browsing through Windows Explorer they sometimes run across folders that appear as unassociated files. This requires the user to click the 'Refresh' button in Windows Explorer to properly see the folders. The files and folders are