similar to: Sierrawireless 597c

Hi everyone, I would realy appreciate your help and guidense with a problem I have. Im trying to set up a SMS Gateway as a alert system for my network. Although the Aircard is picked up as a usb device and has a driver in the kernel, it does not have a /dev/XXX device name. So my question is how do I create this /dev/XXX device and make it persistent. I have installed CentOS as my base with

please subscribe to the nut user mailing list ( http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser) and post the output of "/path/to/usbhid-ups -DDDDD -a <your_ups_name_in_ups.conf>" cheers, Arnaud -- Linux / Unix Expert R&D - Eaton - http://www.eaton.com/mgeops Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer -

Hi all, Currently, the "megatec" driver only supports UPSes which have a serial (RS232) interface. However, I'm under the impression that most of the models that speak the megatec protocol, and have an USB interface, just have a standard serial-to-USB converter inside. This being the case, there should be a "/dev/ttyUSBx" device which the megatec driver could use just as

Hi all, Currently, the "megatec" driver only supports UPSes which have a serial (RS232) interface. However, I'm under the impression that most of the models that speak the megatec protocol, and have an USB interface, just have a standard serial-to-USB converter inside. This being the case, there should be a "/dev/ttyUSBx" device which the megatec driver could use just as

Can't connect to network even with no security. Is this possibly a firmware issue? -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: This is a digitally signed message part. URL: <http://lists.centos.org/pipermail/centos/attachments/20090401/7c80deca/attachment-0003.sig>

doctordruidphd wrote: > I am trying to use software to program a scanner radio (BCD396t and UASD software). The software installs and seems to run properly, reading and writing database files. But I cannot connect to the scanner, through a USB-to-serial cable. > OS: ubuntu-8.10, kubuntu-8.10, debian/lenny (tried them all) > > lsusb identifies the cable as follows: > Bus 002 Device

I have several discontinued Sierra Wireless MP775 mobile GSM/EDGE radio modems. These devices were originally installed in emergency vehicles to provide data and voice access along with GPS reporting. They have external RF connections for GSM/EDGE and GPS signals. The baseband side includes four wire audio, RS-232 serial, USB and some parallel digital I/O for panic switches etc. GSM voice

where can I find packages for hplip and it's deps for centos4x?

Where can I find gv for centos 5.x -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available URL: <http://lists.centos.org/pipermail/centos/attachments/20080912/706041b4/attachment-0002.sig>

On 8/15/2017 6:13 AM, Charles Lepple wrote: > On Aug 10, 2017, at 12:19 AM, Harlan Stenn wrote: >> >> 0.447497 HID descriptor length 37 >> 0.450449 Report Descriptor size = 37 >> 0.451062 Using subdriver: PowerCOM HID 0.5 >> 0.451996 3 HID objects found >> 0.453502 Path: ffa00001.ffa00001, Type: Input, ReportID: 0x00, >> Offset: 0, Size: 8,

I need to get a wireless device for an upcoming trip (USB is preferable to PCMCIA for a long list of reasons) and I'm wondering if anyone has any experience with or recommendations for such items, particularly which ones work with Linux/CentOS. Right now I'm debating between a reasonably cheap Belkin 54G and a slightly more expensive Netgear 54G. Thanks. mhr

Good day! I'm struggling to connect by Advice Partner PRPC650 UPS to Nut. The UPS uses USB for communication and the current problem is that serial device (/dev/ttyUSB*) is not detected. OS is Debian Lenny (same behavior on Ubuntu Hardy). Did anyone have any success with this UPS? Here is what my dmesg and udevmonitor say (on Debian): dmesg: usb 2-3: new low speed USB device using ohci_hcd

Dear NUT users/developers, I'm having trouble while trying to configure the UPS APC BZ2200BI-BR[1] in NUT, which despite having a USB cable it apparently communicates using the serial protocol. The relevant output of 'lsusb' is: Bus 002 Device 004: ID 051d:c812 American Power Conversion The device is registered as /dev/ttyACM0 and uses the kernel module 'cdc_acm' (USB

Hi list I've a quetsion: I bought a Sierra Wireless AirCard 775 PCMCIA that may work well with linux See http://mycusthelp.com/sierrawireless/supportkbitem.asp?sSessionID= <http://mycusthelp.com/sierrawireless/supportkbitem.asp?sSessionID=&Inc=2870 &sFilA=FAQ%20Category&sFilB=Products&sFilC=&FA=19&FB=23&FC=-1>

Hi I have to use a windows application tu upload firmware to a controller. It uses the serial port. I use a MacBook with Tiger 10.4.8 I have installed a usb-serial converter. The device is /dev/tty.usbserial tilo-lutz:~/.wine/dosdevices tilolutz$ dir /dev/tty.usbserial crw-rw-rw- 1 root wheel 9, 8 Feb 24 17:31 /dev/tty.usbserial I was able to compile wine 0.9.31 with help of darwine.

Hi I am trying to connect a reliance netconnect data card on my linux box ( cent os ) , i am able to the detect the device /dev/ttyUSB0 these are the following steps I did : Check your card is recognized by the kernel # cat /proc/bus/usb/devices ..... ..... T: Bus=07 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 11 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P:

Hi Charles! Thanks a lot for your response. Now I figure why the isbmex driver was not working. On the other hand I've tried to run the command suggested. But no success. I got this information when running the dmesg command after running the modprobe $ sudo modprobe ftdi_sio vendor=0x0483 product=0x0035 [35816.111760] usbcore: registered new interface driver usbserial [35816.111792]

Hi everybody, I am installing an Upsilon 2000 UPS via USB adapter on a RedHat 9 and I cant make that the device communicate correctly. Please any help will be welcome dmesg attached Thanks Gonzalo Red Hat 9.0 2.4.34.1 #dmesg usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb.c: new USB bus registered, assigned bus number 1 usb-uhci.c: $Revision: 1.275 $ time 15:28:15

Hello everyone, has anyone ever tried to make this device work with Linux and NUT? This is what udevadm monitor says: UEVENT[1215983089.652345] add /devices/pci0000:00/0000:00:0f.2/usb1/1-1 (usb) UEVENT[1215983089.652427] add /class/usb_endpoint/usbdev1.4_ep00 (usb_endpoint) UEVENT[1215983089.657975] add /devices/pci0000:00/0000:00:0f.2/usb1/1-1/1-1:1.0 (usb) UDEV

I used a brazilian UPS from "TS-Shara" which uses the megatec serial protocol and it works perfectly. Now I have another one from the same brand (TS-Shara) and it uses a USB cable. I found the following: T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0483 ProdID=0035 Rev= 2.00 S: