similar to: HP Hardware

On 10/07/15 11:13, m.roth at 5-cent.us wrote: > Jack Bailey wrote: > >>> controller that expects to talk to individual SAS or SATA drives. you >>> can manage it with hpssacli from centos. >> I have the P822. It has no JBOD or RAID 0. hpacucli works with CentOS >> 7.0, but is broken on 7.1 -- it cannot find the controller. > Can it do RAID 6? > This page

I was wondering if anyone here has experience with HP MSA60 with P400 and P800 controller. How reliable are they for a 24x7 shop? TIA

I have CentOS 6.x installed on a "HP ProLiant DL380 G5" server. It has eight 750GB drives in a hardware RAID6 array. Its acting as a host for a number of OpenVZ containers. Seems like every time I reboot this server which is not very often it sits for hours running a disk check or something on boot. The server is located 200+ miles away so its not very convenient to look at. Is

I had to install C5 on a dev server for various reasons (legacy system support and so forth). This dev server is a HP DL180 G6, with a SmartArray P410 raid card... I've installed hpacucli via the RPM from HP's site, but its not finding the controller... C5 (64 bit) is using the default CCISS drivers for this card. # hpacucli ctrl all show config Error: No controllers detected.

Hi list! I tried to install Xen 4 in a HP Proliant ML350 G4p, but it seems not compatible, is there another way to run Xen 4 in this server ? I couldn''t find any information on Hp''s site neither Intel''s site ... Thanks ! -- @ntonio _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com

On 10/07/15 10:06, John R Pierce wrote: > On 10/7/2015 8:42 AM, m.roth at 5-cent.us wrote: >> Got an old HP box with a P800 Smart Array controller. The HP RAID >> box >> plugged into it's failing, and we got a new JetStor. Anyone know if we >> can just plug the JetStor in and set it to passthrough, or if we have >> to use the P800's firmware to set up

Jason Warr wrote: > On July 10, 2015 11:47:09 AM CDT, m.roth at 5-cent.us wrote: >> Hi. Anyone working with these things? I've got a drive in "predictive >> failure" on in a RAID5. Now here's the thing: there was an issue >> yesterday when I got in, and I wound up power cycling the RAID; >> first boot of attached server had issues, and said the

Dear All, Currently i am using HP x6600 Server and I have installed RHEL4 Update 4 AS Linux and RHEL4 Update 4 Support Cluster Suite in my server I am new in fence and can any one help me how to configure HP ILO fence in my server and HP ILO Fence Functionality Regards -S.Balaji

Hello I do have problem using Linux with an external HP tape drive. The server platform is also an HP Server; the server is an HP ML350 G4, and the Tape drive is a HP Storage Works Ultrium 448 - 1U Rack-mountable. HP Ultrium documentation says two drivers should be automatically up, sym53c8xx for LSI SCSI interface "st" for tape and /proc/scsi/scsi should contain information about

will C5.3 support a SmartArray 6i 'out of box', or does it need drivers to boot from this? I am advising someone else remotely and don't have the hardware handy to test.

Hi All I will need to install CentOS 5.3 on HP DL380 R05 server with RAID-1 required. I am a newbie to CentOS / HP servers, need your help: - Does CentOS 5.3 work smoothly with HP DL380 server especially recognizing SAS disks and hardware RAID-1 features? From you experience, do you have to use HP Storage Drivers provided for RedHat Enterprise Linux 5? - How is HP

On Fri, 10 Mar 2006, Herta Van den Eynde wrote: > I'm trying to install Red Hat Advanced Server AS 4 on a HP Proliant DL380G4. > Unlike e.g. the DL360, the DL380 does not have the option to set the OS in the > BIOS. > As soon as the installation starts, i.e. even before you get to the point > where you can enter "boot" and whatever boot options you want to use, the

I am writing a hp ilo module to automatically assign a static ip that is derived from the IP of the system which is fed in via facter. I basically just need to change the network the ilo is connected to. The ruby code works great inside the irb console. However, puppet doesn''t seem to be able to use the variable I have derived from the ipaddress. This is my first template so I am not

Greetings: HP has drivers for the this controler but how do you get the drivers working for the install on Centos 4.0 ? Integrated Dual Channel Ultra ATA 100 IDE Adapter (ATA Models) I extracted the files from this RPM and placed on a CD. hpacucli-7.21-17.linux.rpm boot with the driver disk option and it does not find drivers. I'm I on the right track? Thanks -Jay

The hpacucli works... but what isn't clear to me, even with googling, is whether I have to do something from the utility, or whether I can just pull the failed drive out of the hot-swap bay and put another in. I *do* see that I have to re-enable the drive, or rescan it, but right now, I'm concerned about just pulling the dead one out. mark

Hi I'm having problems getting the TE420 working in HP DL380G5 servers. The cards don't seem to be detected 100% by the BIOS. With two cards in the server they are never detected. things I've tried: 1 Update firmware to latest (P56) for the server 2 change irq settings 3 disable all onboard devices on server and remove raid controller 4 different cards in different slots What I

Guys, I'll be building a couple of DL360 G4p & DL380 G4 boxes soon and I've not dealt extensively (i.e. at all) with any PC stuff that hasn't been i386. I know the DL line pretty well but it was all G2/3. So, question is, do I stick CentOS i386 or x86_64 on them? 2 boxes x 2GB RAM and 1 x 4GB, all SMP. Will.

Hi. Anyone working with these things? I've got a drive in "predictive failure" on in a RAID5. Now here's the thing: there was an issue yesterday when I got in, and I wound up power cycling the RAID; first boot of attached server had issues, and said the controller had a failure, and a drive had failed, and wouldn't continue booting; when I gave it the three-finger salute,

Is anyone successfully running asterisk on an HP proliant while using their management software, hpasm? I have two DL360's and two TE220B's. The cards have their own IRQ's. No matter what combination of settings I use, the cards fail the patlooptest if hpasm (ver 7.9.1) is running. If I stop it the cards pass the test. I really want to run the management software, so I'd