similar to: mirroring with LVM?

No functional change. --- tests/lvm/test-lvm-filtering.sh | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/tests/lvm/test-lvm-filtering.sh b/tests/lvm/test-lvm-filtering.sh index 0c8b8803a..abb88ae6c 100755 --- a/tests/lvm/test-lvm-filtering.sh +++ b/tests/lvm/test-lvm-filtering.sh @@ -40,22 +40,22 @@ pvcreate /dev/sdb1 vgcreate VG1 /dev/sda1 vgcreate VG2

this has never happened to me before, and I'm somewhat at a loss. got a email from the cron thing... /etc/cron.weekly/99-raid-check: WARNING: mismatch_cnt is not 0 on /dev/md10 WARNING: mismatch_cnt is not 0 on /dev/md11 ok, md10 and md11 are each raid1's made from 2 x 72GB scsi drives, on a dell 2850 or something dual single-core 3ghz server. these two md's are in

Ran into a confusing situation today. When I mount an xfs filesystem on a server running centos 5.4 x86_64 with kernel 2.6.18-164.9.1.el5, the barrier/nobarrier mount option as displayed in /proc/mounts is always set to "nobarrier" Here's an example: [root at host ~]# mount -o nobarrier /dev/vg1/homexfs /mnt [root at host ~]# grep xfs /proc/mounts /dev/vg1/homexfs /mnt xfs

Hello ext3 list, I am having an odd issue with one of my filesystems, and I am hoping someone here can help out. Yes, I do have backups. :) But as is often the case, it's nice to avoid restoring from backup if possible. If there is a more appropriate place for this question please let me know. After quite a while between reboots, I saw a report on the console that the filesystem was

Hi, I am trying to install a C6 VM on C6 using the text installer using: # virt-install -n C6_1 -r 3072 --os-variant=rhel6 -l \ ftp://ftp.nluug.nl/site/centos.org/CentOS/6.3/os/x86_64/ --disk \ path=/dev/VG1/vm_c6_1 -w network:default --nographics \ -x "console=ttyS0" --autostart /dev/VG1/vm_c6_1 has been successfully created. The installation starts but once I get to the disk

'--no-degraded' flag in the first mdadm call inhibits the startup of array unless all expected drives are present. This will prevent starting arrays in degraded state. Second mdadm call (after LVM is scanned) will scan unused yet devices and make an attempt to run all found arrays even they are in degraded state. Two new tests are added. This fixes rhbz1527852. Here is boot-benchmark

Hello, I am trying to boot an RHAS 4 release 3 guest kernel (the binary release available through Redhat Network) from a SLES 10 dom0 host (the binary release available through Suse''s software distribution channel). Both systems are installed as physical partitions in a standard multiboot configuration on a single hard drive on a recent vintage HP Pavilion (zd7380) notebook PC with a

I am currently using a Dell PowerEdge server R610 with Xen 4.0 installed and the 2.6.31.13 pvops kernel. I am accessing the server console using the iDRAC KVM feature of the dell management console. Does anyone know how to configure the console option in the grub menu so that all the boot messages can be seen on the mgmt console? Currently I can view only the Xen bootup messages if I dont specify

-- Hi. I'm running Ubuntu Precise 12.04 LTS. I created some virtual machines using vmbuilder, and then migrated those from their .qcow files to lvm. However, those virtual machines are still using disk type "file": Code: <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source

I am running Xen 4.0.1 with a 2.6.18-194.32.1.el5xen CentOS Dom0. I built and installed the Xen binaries from source. The systems boot successfully however I am having issues bring up DomUs. Here is config: name = ''xyz'' memory = 256 vcpus = 1 pae = 1 vnc = 1 vncunused = 1 disk = [ ''phy:/dev/vg1/xyz,hda,w'' ] vif = [

This one has me stumped and I'm sure I must be missing something trivial. What is is eludes me. I have a 20G drive that will be replaced with a 160G drive. The /boot partition is just a standard type 83, and the swap is an 82. The system root partition is in a LV, as is the /home partition. I've upgraded hard drives dozens of times without incident, but never ona system with LVM.

I am running Xen 4.0.1 with a 2.6.18-194.32.1.el5xen CentOS Dom0. I built and installed the Xen binaries from source. The systems boot successfully however I am having issues bring up DomUs. Here is config: name = ''xyz'' memory = 256 vcpus = 1 pae = 1 vnc = 1 vncunused = 1 disk = [ ''phy:/dev/vg1/xyz,hda,w'' ] vif = [

Greetings, I would like to know how one can identify if a DomU is PV or HVM? Any docs which may indicate a way to find out? I have a CentOS 5.5 64bit DomU which might be HVM - how can this DomU can be made PV? Just stop the DomU, and then delete it using Virtual Machine Manager and the create another config file for a PV DomU and use xm new and then xm start? Let''s say I have a config

Greetings, I''ve had no success with mounting a vfat file system created by a Windows XP guest on a lvm volume. # mount -t vfat /dev/vg1/win1 /mnt/ mount: wrong fs type, bad option, bad superblock on /dev/vg1/win1, missing codepage or other error In some cases useful info is found in syslog - try dmesg | tail or so # dmesg FAT: invalid media value (0xb9) VFS:

Hi Everyone. I am downloading intraday Bloomberg data from R. The code I give is: library(zoo) library(chron) library(RBloomberg) conn<-blpConnect(show.days="trading",na.action="previous.days",periodici ty="daily") dat<-blpGetData(conn, "VG1 Index", c("LAST_PRICE"), start=as.chron(as.Date("2006-9-01",

Hi, we´ve got a bad problem here. We installed a new server with debian squeeze sw-raid and lvm. We´ve installed the the actual xen-linux-system-2.6.32-5-xen-amd64? system with grub2 but get an XEN BUG. We´ve tried alot, tested grub-legacy version but cannot get the XEN kernel to boot up. The XEN BUG occurs a  second after grub boots the kernel and there are no outputs at the serial console with

I try to set up a Samba4-based Fileserver in an Samba3-DC enviroment. Filesystem is ext4, CIFS + NFS4 should be provided. The same ACLs should be used over both protocols. With Samba 3 this was possible (using POSIX 1003.1e DRAFT 17 ACLs only) . How can I do the same with Samba 4 ? Posix-ACLs set on the server with setfacl are recogniced on a windows-client. But every change I do on a

"R Installation and Administration", section 2.5 "Sub-architectures" describes calling specific builds of R using the call "R --arch=name". I am trying to build and install three versions of R-2.9.1, each configured with a different valgrind-instrumentation level ("Writing R Extensions", section 4.3.2 "Using valgrind"). My goal is to be able to

Hello, CentOS 5.0 on x86_64 I'm trying to set up Xen paravirt guests with access to 2 block devices: One for / and one for swap. The block devices are LVM LVs, but that shouldn't matter. When I create the guest using either virt-manager or virt-install, I get asked which device to use for xvda. But I want more block devices: xvdb for swap. I know how to add this as an option to the

Hello, I've seen this already asked and answered but it is still a no go for me. I'm trying to do some preprocessing in the middle of a call, before bridging. I've seen two choices: M() and G() parameters of the Dial() command. G() was discarded because I don't know if it is possible to bridge channels after processing. With M() I've done something like that: macro