similar to: Modem network card conflict

Hi all, I have one last windows programme to get working under wine before I can ditch my company's last windows pc, but so far I am stumped by it. The programme is supplied by our bank & is used to dial up to the bank, log into the network & do things like viewing statements, making bacs payments etc. The programme runs fine but when I try to connect to the bank I get an error

Hi All Im having problems setting up a dialup connect in CentOS PPC I get the following error when attempting to use wvdial (modem set as /dev/ttyS0) --> Cannot open /dev/ttyS0: input/output error Ive tried kppp but ive had not luck Anyone know how to fix this? normally I would use pppconfig and pon/poff but havent been able to use/find them, are they install by default? __ Note: this

Hi I'm trying to connect a USB CDMA modem (z010) to a CentOS 4.1 (kernel 2.6.9-11.EL) and I can't talk to the modem. I tried the same modem under Fedora Core 1 (2.4.22-1.2199.nptl) and it works like a charm. The only difference is /dev/ttyACM0 for CentOS and /dev/input/ttyACM0 for the Fedora. Any help would be appreciated. Tank's. Fernando Lan?a Some debug info: CentOS:

Hi I am trying to connect a reliance netconnect data card on my linux box ( cent os ) , i am able to the detect the device /dev/ttyUSB0 these are the following steps I did : Check your card is recognized by the kernel # cat /proc/bus/usb/devices ..... ..... T: Bus=07 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 11 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P:

Hi Guys, I'm 100% sure this is not a Linux issue but I want a second opinion... I have a Linux server running CentOS. It was been absolutely perfect without any errors or problems. Since Monday it has been unable to send email. It is configured to act as a smart host. All email gets forwarded to smtp.isp.net. The server is on a network behind a firewall completely nat'd. No ports

Hi Guys, I'm looking for a VPN solution that will run on CentOS. I've used PopTop with success but some clients have problems at hotels and other firewalled locations. If anyone can suggest something that works well with MS 2000/XP, doesn't require too much tweaking on the client side and is fairly resiliant to various firewall blocking, I'd be interested in hearing about it.

I'm trying to kickstart a Centos 4.1 system with the minimum set of packages. I have no use for ypbind so I'm trying to prevent from being installed, but kickstart/anaconda always insist on its installation (complaining that the package is missing). This is the %packages section of my ks file so far: %packages #-@ dialup kernel grub e2fsprogs lvm2 -slocate -bluez-utils -bluez-bluefw

I have been trying to get an EVDO modem to work with Centos 5. I can make it dial out with wvdial only when I'm the root user. Otherwise I get this error: Cannot open /dev/ttyUSB0: Device or resource busy I added the user to the uucp group. crw-rw---- 1 root uucp 188, 0 Dec 3 02:30 /dev/ttyUSB0 crw-rw---- 1 root uucp 188, 1 Dec 3 02:30 /dev/ttyUSB1 crw-rw---- 1 root uucp 188, 2 Dec

Hi Guys, I have a client who hopes to keep their server another 5 years making it 10 years old at that time. At this point there are no plans to add new infrastructure or a new server to the mix. Their business model is fairly static. I'd like to see them upgrade. Can anyone suggest specific reasons why running a business on 10 year old equipment is a bad thing? Specific arguments I can

Hello Asterisk-users, I am new to Asterisk. I got SIP Calls to work between two computers using a soft phone and asterisk in the middle. Since then, I have been trying to get my soft phone to make a PSTN call with terrible failure for about two days now. On Windows using asteriskwin32: I have a soft modem (Agere HDA Modem) in my laptop. Windows' default dialer is able to make a PSTN call by

Hello I am required to do some thing like Dail in modem . User will have to call a modem just like we do in dail up connection ....now we need to handle that request and retrieve some parameters from that send a HTTp request to a web server and then after getting http response send user a feed back .. this is a requirement .. Is it possible ?? what is the way forward ?? please give me a

Hi All, I have recently installed CentOS 6.3 with QEMU+KVM for Virtualization. I have successfully created a Windows 2003 VM with 4GB of RAM. The host server is an HP ML350 G8 with 24GB RAM and 24 cores. Details of one of the cores is shown below: processor : 23 vendor_id : GenuineIntel cpu family : 6 model : 45 model name : Intel(R) Xeon(R) CPU E5-2620 0 @

Shorewall 4.5.15 3 Interface setup em1 p3p1 p4p4 ppp0 Hi, Since changing to NetworkManger on Fedora 18 I can no longer connect to the DSL Modem, which is connected to Interface em1. When the NetworkManger brings up the interfaces and ppp0, it no longer assigns an IP to em1. If I have ppp0 disabled and NetworkManger brings up the interfaces, em1 gets an IP of 192.168.1.2. Then when I get

That could have gone smoother. I had many problems with the NFS install on my firewall then once I got the server back up, mail delivery was broken :- ( I still haven''t gotten ulogd to run under RH9.0 but everything else seems to be working ok... -Tom -- Tom Eastep \ Shorewall - iptables made easy Shoreline, \ http://www.shorewall.net Washington USA \ teastep@shorewall.net

Hi I am having problems compiling R on a Solaris 10 opteron box we have on trial. checking for Fortran libraries of g77... -L/usr/ccs/lib -L/usr/lib - L/usr/local/lib -L/usr/local/lib/gcc-lib/i386-pc-solaris2.10/3.3.2 - L/usr/ccs/bin -L/usr/local/lib/gcc-lib/i386-pc- solaris2.10/3.3.2/../../.. -lfrtbegin -lg2c -lm -lgcc_s -lfrtbegin: - lg2c: checking how to get verbose linking output from

I've two machines with almost identical hardware (slightly different CPUs). The SATA/RAID controller is SiI 3114. One of the servers was installed a while ago by someone else, it's running Fedora Core 5 and RAID is enabled: # df -m Filesystem 1M-blocks Used Available Use% Mounted on /dev/dm-6 125931 2990 116441 3% / /dev/dm-1 99

Hello again, I have a table called line_items, with the following fields: id int item_name varchar() qty int conditions text I''ve made my LineItem model, and everything works as such (with simple text_fields).. Now I''d like for the conditions field to be a select_tag() with multiple choice possibility. I''m guessing I need some code to expand/restract the array for

Hi, I would like to implement an auto-redial function in a context. The idea is about like this: Dial a number Hear busy Hangup Pick up again Dial a code like *123 => jumps into a context which redials until callresult is not busy Maybe like this: [autoredial] exten => s,1,Set(number=${CHANNEL(lastdialed)}) exten => s,2,Dial(SIP/${number}@account,60,g) exten => s,3,Wait(15) exten

Hi all. Firstly, I apologize if this question has been asked before, which I'm sure it has. I'm only new to Linux although I have been 'dabbling' for awhile now with Ubuntu, Fedora Core 4, SimplyMEPIS, Xandros to name a few. I found Centos 4.1 on the cover disk of the September issue of APC Magazine and thought I'd give it a go. I want to learn linux and thought this one

I responded to a post in the Dell poweredge mailing list earlier today. My answer was off the top of my head, with a bit of experimentation. The content may be useful in the Cenyos context as well to admin's looking to strip the size of an install to the bare bones. Comment welcomed. Can anyone see any packages which I have missed? -- Russ Herrold ---------- Forwarded message