similar to: Getting something into centosplus for 5.2?

I have a USB to serial converter attached to my box. pl2303: Prolific PL2303 USB to serial adaptor driver if I login to the box and send/receive serial commands over this unit it works without error EVERY time. however, if I run the same command set from with-in the extensions.conf with System() I get errors in dmesg like "pl2303 ttyUSB0: pl2303_open - failed submitting read urb, error

Hello! I've ran into this annoying issue when setting up a new server. I have an APC SmartUPS hooked up on a USB-serial converter on /dev/ttyUSB0. This works nicely, until: hub 3-0:1.0: port 1 disabled by hub (EMI?), re-enabling... pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0 usb 3-1: pl2303 converter now attached to ttyUSB1 apcsmart gets into an infinite loop of this:

Hello, everyone - I have an old Windows app - a ship navigation program - that needs to see GPS input on a serial port (it was written in the pre-USB days.) My laptop, however, has no serial ports - but this same program, when run on a friend's Windows box, can read the GPS info from the USB-connected GPS via the "USB-Serial Driver". This is one of the frustrating bits of this

hello everyone, I've been testing the NUT solution as opposed to the undocumented LanSafe application to control my Eaton UPS. I am on a Slackware 13.37 system with a 2.6.37.6 kernel. NUT version is 2.4.3 . I installed the tarball by compiling it directly on my system (as a slackbuild package). The UPS is an Eaton Powerware 9155, but I don't know how to obtain the manufacturing date. The

Emanuel Strobl wrote: > Am Dienstag, 18. Januar 2005 16:17 schrieb Andrew L. Neporada: > > On Tue, Jan 18, 2005 at 01:06:43PM +0100, Emanuel Strobl wrote: > > > Dear experts, > > > > > > I have two USB-RS232 Adaptors, both with PL2303 chipset. One is working > > > the other one not (I hate to say it but both are working under win). > > > >

Hi Users NUT, I want monitor a UPS of brand SMS (Sinus Double 8 KVA) using a raspberry-pi. In compatibility list, is listed to use the blazer_ser driver. I use a USB adapter to RS-232 conected in to the No-Breake. Follow the comands e confs. root at rasp:/home/pi# lsusb *Bus 001 Device 004: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port* Bus 001 Device 003: ID 0424:ec00 Standard

I am trying to use software to program a scanner radio (BCD396t and UASD software). The software installs and seems to run properly, reading and writing database files. But I cannot connect to the scanner, through a USB-to-serial cable. OS: ubuntu-8.10, kubuntu-8.10, debian/lenny (tried them all) lsusb identifies the cable as follows: Bus 002 Device 002: ID 067b:2303 Prolific Technology, Inc.

On Wed, Jul 8, 2020 at 8:46 AM H <agents at meddatainc.com> wrote: > > I believe I mentioned that the UPS has the serial port, the computer thus > has USB. > > yes, but is it 'basic serial UPS' or is it 'enhanced serial UPS' ? the former do NOT use the rx/tx data of the serial port at all, they ONLY use the serial port control signals, and they probably

Yes I do have Linux. I have assigned the ups.conf file as seen below.. [testups] Driver = usbhid-ups Port = /dev/ttyUSB0 When I try to start the ups driver I get the following error... $ sudo upsdrvctl start Network Ups Tools - UPS driver controller 2.7.1 Network Ups Tools - Generic HID driver 0.38 (2.7.1) USB communication driver 0.32 No matching HID UPS found Driver failed to start (exit

On Wed, Jul 08, 2020 at 01:40:27PM -0500, Chris Adams wrote: > Once upon a time, John Pierce <jhn.pierce at gmail.com> said: > > yes, but is it 'basic serial UPS' or is it 'enhanced serial UPS' ? the > > former do NOT use the rx/tx data of the serial port at all, they ONLY use > > the serial port control signals, and they probably will NOT work with a

    Lately I replaced my 10+-year-old server with a nano-ITX-type one that has USB but not old serial ports.  I connected my FE700VA to DB25-to-9-to-USB cables, but haven't been able to set it up. Apparently my DB9-to-USB cable (Prolific Technology, Inc. PL2303 Serial Port) has issues needing old software (setserial?) and some new software (fconfigure) being changed.  Has anyone managed

Hi, is there a way to use my Belkin F6H650 on the USB port? I already installed usbhid-support, but neither the hidups worked (reports "/dev/usb/hiddev0 is not a UPS") nor genericups with upstype=7 and the hiddev set as device ("ioctl TIOCMSET: Invalid argument") worked. I have installed the debian sarge package of nut 2.0.1 (2.0.1-4) Regards, Philipp

Hi, I am looking any way to communicant with Arduino (http://www.arduino.cc/) Wiring (http://www.wiring.org.co) boards and read data generate with sensor on these. If anyone know how to do it, I will appreciate if could give some advice. Thanks in advance

Hello, on my journey to debug some things i stumbled over this. Perhaps this could be usefull. just a suggestion for a feature to implement: EHCI Debug Port As more and more pc?s are legacy free.. so no serial port for debuging, this could be interesting, http://www.coreboot.org/EHCI_Debug_Port It is already used in the linux kernel and there is also a linux module that acts as a

Hi, I just want to know if somebody use 2.6.31.4 xenified kernel (aka OpenSUSE) in production? We have been testing it on new Nehalem Xeon server for few weeks w/o any problem. But as soon we tried it on production machine - after several production domUs started - hard OS failure. We had to switch back to 2.6.18.8 - xen stock kernel. Peter _______________________________________________

On 09/29/2020 10:07 PM, John Pierce wrote: > try the camera in a USB 2 port, it should work just fine at usb 2 speeds. > most systems, the USB 3 ports hve a 'blue' tongue, while the 2 ports are > black or another color. > > On Tue, Sep 29, 2020 at 6:50 PM H <agents at meddatainc.com> wrote: > >> On 09/29/2020 09:09 PM, John Pierce wrote: >>> do

Hello! At first, i want to run the latest HandBrake (version 0.93) on a Mac with Mac OS 10.4 (Tiger). The problem is, that Handbrake is developed for Mac OS 10.5 (XCode SDK is not compatible to Mac OS 10.4 one). So i decided to try it with wine/darwine. Because wine is better supported on Linux and you can get easier newer version (apt-get), i decided to run HandBrakeCLI.exe on Debian Etch

On May 2, 2014, at 3:26 AM, Kastus Shchuka wrote: > Hi, > > I am trying to set up NUT on a mini-ITX system running OpenBSD 5.5. > > I have an APC Smart-UPS SC620 which runs perfectly well on Ubuntu, > with nut-2.2.1. Ubuntu system uses ASUS motherboard. > > On mini-ITX system, I have Intel d2500cc motherboard with 4 serial ports. > I've tested ports by connecting

Hi, I got a new Cyberpower 1500AVR UPS and nut wouldn't work. It failed to detect the UPS and a strace showed that all writes to the serial port were failing with -EAGAIN. The attached patch disabled nonblocking mode on the serial port and now it works fine. Is there a reason the port was put in non-blocking mode? There's no code I could find to deal with the inevitable -EAGAIN that

Hi, I am trying to set up NUT on a mini-ITX system running OpenBSD 5.5. I have an APC Smart-UPS SC620 which runs perfectly well on Ubuntu, with nut-2.2.1. Ubuntu system uses ASUS motherboard. On mini-ITX system, I have Intel d2500cc motherboard with 4 serial ports. I've tested ports by connecting them with a null-modem cable and running cu in 2 terminals. Type in one terminal, output shows