similar to: Configuring sendmail in a corporate environment

Currently, we have two mail relays for inbound messages, and a third for POP. The inbound messages go thru all the CPU-intensive anti-spam stuff, and then they relay it to the POP server for pickup. Currently, one of these is the "primary", and the other is "secondary", and I'd like them to be considered more or less as equals, since the "primary" system is

I know this mostly depends on what is/will be done upstream, but with the recent announcement that Firefox 1.5.X will only receive updates until April 24, 2007, is Firefox 2.X in CentOS' future? Alfred

I'm just starting to test CentOS 6 in our environment, and as a first step did a basic install from DVD (Desktop target, all defaults). Next I will try to automate the installations as I did for CentOS 5 using the anakonda-ks.cfg file generated by the manual install. However, I can't wrap my brain around the new NetworkManager to get it to configure the eth0 interface to obtain an IP

The thread "Problems with kernel-3.10.0-693.5.2.el7.x86_64? reminded me that I have a similar problem but on the latest CentOS 6 kernel I?ve been meaning to report. Here is the relevant system information: Linux ssg003.bose.com 2.6.32-696.13.2.el6.i686 #1 SMP Thu Oct 5 20:42:25 UTC 2017 i686 i686 i386 GNU/Linux 00:02.0 VGA compatible controller: Intel Corporation Device 5912 (rev 04)

Does anyone have remote desktop connectivity working in CentOS 5.3? I'm using the Gnome desktop and have configured the Remote Deskop Preferences to "Allow other users to view your desktop" and "Allow other users to control your desktop". The configuration dialog box says that "Users can view your desktop using this command: vncviewer

I have a CentOS 5.3 VM running under VMware on a WIndows XP laptop. Everything works fine when connected to the network. However, removed from the network, most everything in the CentOS VM takes minutes to complete. For instance, starting a new Terminal window takes over 3 minutes. I did an strace, and there are a couple of long waits when trying to open a socket

> On Mar 5, 2020, at 6:05, Peter Kjellstr?m wrote: > > You can use singularity. The following example makes an image by > pulling from centos on dockerhub: Interesting! However, I would prefer to use more ?native? Docker commands, as I would rather not have all developers install and configure Singularity when they already have Docker installed on their systems. There has got to be

Hi All, I am 'trying' to set SMART_HOST in sendmail to point to smtp-relay.gmail.com but when looking at the /var/log/maillog its going to mx203.inbound-mx.net. [192.110.255.243], why??? my line from sendmail.mc define(`SMART_HOST', `smtp-relay.gmail.com') I did make in /etc/mail and service sendmail restart This is the only SMART_HOST in the config file. I started with the

A friend has an old Pentium-133 laptop with 32MB of memory and a 1.3 GB hard disk that he wants to use as a web server for a very small community. Will CentOS (or any other RHEL derived distribution for that matter) install and run with acceptable performance on such a system, or will a specialized distribution like Damn Small Linux be a better choice? In this case, disk space is not a big

On Feb 3, 2016, at 17:10, Warren Young wrote: > smartctl can see through several different types of RAID controller to the underlying physical disks via its -d option. This is what I have: # smartctl --all /dev/sda smartctl 5.43 2012-06-30 r3573 [i686-linux-2.6.32-573.12.1.el6.i686] (local build) Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net Vendor:

> On Mar 30, 2015, at 17:24, Patrick Flaherty <pflaherty at wsi.com> wrote: > > Tell your vendor you want a centos 6 version of the library, it's really > not a huge ask, esp if you are paying them. If they say no, do a new > install of centos 7 and run it on a different box. It's the only reasonable > thing to do, and if you do anything else and make anyone else

I'm running the command "yum -y update" from a script called from the the post section of my kickstart config file, and I get the following error: Installing : kernel-2.6.32-71.29.1.el6.i686 185/378 grubby fatal error: unable to find a suitable template After the install, if I log in to the system and remove that RPM and then re-install it with

On Feb 3, 2016, at 16:13, Warren Young wrote: > A dying hard disk can do it. HDDs try to silently paper over I/O errors, but what they can?t hide is the time it takes to do this. If your HDD is constantly correcting errors at the oxide layer, it will be reeeeeallly sllllow. > > You can try running SMART tests on it, though that?s not guaranteed to show the problem. Well, it?s not ?a?

The company where I work is mostly a Windows shop, but I run a few CentOS servers and desktops. I have configured my systems as follows with Kickstart: authconfig --enablemd5 --passalgo=sha512 --enablenis --nisdomain=XXX \ --nisserver=nis1.XXX.com,nis2.XXX.com --useshadow --enablekrb5 \ --krb5realm=XXX.COM --krb5kdc=ldap.XXX.com --krb5adminserver=ldap.XXX.com The /etc/nsswitch.conf file

I have been using 32-bit CentOS since the 4.X days without a real need for 64-bit, but in preparation for CentOS 7, I have installed 64-bit CentOS 6 on a test system to qualify all our builds. However, in order to build some of our current 32-bit applications, I had to install some i686 packages, including glib. Now when I try to do a "yum update" on this test system, I get the dreaded

I am in the process of updating a dozen or so workstations from CentOS 4.3 to CentOS 4.4. I set up a local YUM repository, and have been able to successfully update all systems except for one. Both yum and rpm either hang or core dump on this system. I've done a "yum clean all" and an "rpm --rebuilddb" (after deleting the __db files). I was able to

I recently reconfigured some CentOS 4.3 systems that were using DHCP to use static IP addresses. At the same time, the systems were moved to a new VLAN. Here is the approximate sequence of events that took place: 1. ifdown eth0 2. edit /etc/sysconfig/network-scripts/ifcfg-eth0 with static IP address 3. wait for network folks to reconfigure switch 4. ifup eth0 I may have

HI folks, I've an up-to-date CentOS 5.x box on a small intranet (<20 users). We did a reboot over the weekend and all appears well except that clients on the LAN can no longer send email. Just hangs/times out. No clear identifiers in the /var/log/maillog or /var/log/messages. We're not setup for ESMTP as it's a closed network and I'm really hoping for a kickstart as to

Hi all, I set my sendmail.mc file to have a SMART_HOST entry of mail.xyz.com I do "make" and "service sendmail restart" ... I should be good, but no. :) If I do "host mail.xyz.com" I get the correct address and if I "telnet mail.xyz.com 25" I get a connection. however when I do a test mail - its trying to RELAY to another host. I thought SMART_HOST was

I was looking at my maillog and it looks like someone is trying to get into my pop3 server. Dec 9 15:28:54 mailserver dovecot: pop3-login: Aborted login: user=<alexis>, method=PLAIN, rip=::ffff:66.167.184.203, lip=::ffff:192.168.1.2 Dec 9 15:29:08 mailserver dovecot: pop3-login: Aborted login: user=<alfonso>, method=PLAIN, rip=::ffff:66.167.184.203, lip=::ffff:192.168.1.2 Dec 9