similar to: chkconfig update fails

CentOS 5 updated, Xen host. The portmap on this machine is somehow "stuck" and I can't figure out why. I enabled it to be able to mount a remote nfs share. The first hurdle was that "portmap" didn't appear in the chkconfig list, it was installed with the initial packages but not added to chkconfig. Took me a while to figure this out. Adding and starting it up is no

I usually don't setup any GUI on my Linux systems. Yesterday I installed with X and Gnome on a spare system for some testing and hit a problem. Right after login the system freezes. The system froze already earlier when I opted to test the sound card on the Welcome screen and when I login with the alternative login choice xterm and shut down it freezes when "saving mixer

Somehow I managed to disable the creation of xenbr0 on boot-up of the host system. CentOS 5 with standard CentOS Xen. I changed all Xen VMs to use xenbr0 instead of virbr0 and disabled virtlibd. Works fine. But when I later restarted the machine I found that all networking for guests had gone. On inspection there's no xenbr0 created anymore. I can get it up by stopping network (or eth0)

Use NEVR when querying RPM for the list of files of a package, instead of ENVR. Also, use the epoch only when non-zero, and version of RPM supports it. The approach is basically copied from what supermin does in its RPM package handler. --- v2v/linux.ml | 55 ++++++++++++++++++++++++++++++++-------------------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/v2v/linux.ml

Use NEVR when querying RPM for the list of files of a package, instead of ENVR. Also, use the epoch only when non-zero, and version of RPM supports it. The approach is basically copied from what supermin does in its RPM package handler. --- v2v/linux.ml | 59 +++++++++++++++++++++++++++++++++------------------- 1 file changed, 38 insertions(+), 21 deletions(-) diff --git a/v2v/linux.ml

Use NEVR when querying RPM for the list of files of a package, instead of ENVR. Also, use the epoch only when non-zero, and version of RPM supports it. The approach is basically copied from what supermin does in its RPM package handler. --- v2v/linux.ml | 52 +++++++++++++++++++++++++++++++--------------------- 1 file changed, 31 insertions(+), 21 deletions(-) diff --git a/v2v/linux.ml

Hi all, I have update recently to freebsd 9.1 via freebsd-update and I was quite happy with the process and the instructions on freebsd-handbook, I think well documented. But I would like to understand what is the best practice to update the ports too as I used the package tools (pkg_add -r) to add few package to the base install. Keeping in mind my server have disk space constrain (small disk

Is there a program on CentOS which will sort my passwd/group etc. files by username or uid/gid? On Suse I can do this with a sysconfig switch and Suseconfig, is there something similar on RH-based systems? Kai -- Kai Sch?tzl, Berlin, Germany Get your web at Conactive Internet Services: http://www.conactive.com

I thought I post this link http://monty-says.blogspot.com/2009/12/help-saving-mysql.html in case anyone isn't aware of this yet and wants to email the EC. Kai -- Kai Sch?tzl, Berlin, Germany Get your web at Conactive Internet Services: http://www.conactive.com

Hi, I am constantly getting an error when I use the rake command to do a migration or even use drop, this happened after I installed some plugins such as paperclip and seed-fu. The error is: rake aborted! uninitialized constant PKG_NAME /var/www/html/quote/Rakefile:10 The Rakefile looks like this: # Add your own tasks in files placed in lib/tasks ending in .rake, # for example

In the docs for chkconfig it says: <startlevellist> is a list of the runlevels for which the service should be started by default. Only services which are really required for a vital system should define runlevels here. If no runlevels are defined, a - should be used in place of the runlevels list. and then: More commonly, the service is off by default on all runlevels, which looks like

Mark Haney wrote: > > We have a couple of CentOS 7 boxes that were built before I was hired to > clean up the kickstart script used for C7 boxes. We had a couple of rpm > packages that were pre-C7 that were used and setup the old SysV Init way > using ntsysv and chkconfig on these boxes. (I finally fixed that in the > newer scripts.) These are out in the field and I'm

Hi, I'm noticing some strangeness with chkconfig on CentOS 6.0 and was looking for a bit of advice. It appears that chkconfig is re sequencing or re ordering the start priority of various services when turning on a service using chkconfig. Example is the network service. Under normal circumstances network is set to start at S10. However when I add something like snmpd and invoke chkconfig

This is my first major version update after using a local repo. It seems that before I can "yum update" I have to fetch the complete new 5.2 base? Is this correct? When I run yum update it now fails with various strange dependency errors although all the updates are synced. When I change to using the original repo file it wants to download many many more and shows a lot of files that

CentOS Errata and Bugfix Advisory 2013:1276 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1276.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: b7e728c1cb477f0464c8244ab7391216b8e48e04cc4cd1eb306896091b4ac1c8 chkconfig-1.3.49.3-2.el6_4.1.i686.rpm

Hello, gpk-update-viewer on my CentOS 6 desktop gives me an error about untrusted updates. When running yum update from a terminal I get the following error: Package chkconfig-1.3.49.3-2.el6_4.1.x86_64.rpm is not signed No other packages seem to be affected so for now I updated excuding chkconfig and ntsysv. Regards, Leonard. -- mount -t life -o ro /dev/dna /genetic/research

I converted a physical maschine running CentOS 4.6 to a Xen VM on a CentOS 5 host. Almost everything was running when I decided to rsync /lib and /usr a while later in order to get updated files and get the one or two non-working programs to work. There are differences because of the xenU kernel I didn't think about. I forgot to exclude rpm database and /lib/modules. Because the synced

I have a couple of in use C7 boxes that were built with ntsysv and chkconfig for some old packages that needed to start using init.d. (The person setting these up didn't know about systemd creating service files for older packages, so we're stuck with these as-is. Here's my problem: Error unpacking rpm package chkconfig-1.7.2-1.el7.x86_64 error: unpacking of archive failed on

OK, so I made this file: ------------------------------------------ #!/bin/sh<\n> #chkconfig: 2345 60 99 #description: NUT ups daemon if [ ! -f /usr/local/ups/bin/upsd ] then echo "NUT startup: cannot start" exit fi case "$1" in "start") chmod 0600 /proc/bus/usb/005/002 chown nut:nut /proc/bus/usb/005/002 /usr/local/ups/bin/upsdrvctl

Using CentOS 5.1 with Xen 3.2. I'm trying to install a fully virtualized system for the first time and doing this with an old Suse 9.0 (this probably would run paravirtualized, maybe it won't run, anyway, because of hardware problems). I start with virt-manager and after choosing "fully virtualized" it presents me two options for install media: iso image and CD-ROM or DVD,