similar to: Upgrade mail server to new machine

I have a brand new Dell Poweredge T310 server with 4G ram and 1TB raid-5 hard drive in it. I Really only need to be able to run a copy of CentOS 5.4 on it, but I'm wondering if in the build process should I stick on ESXi 4 and then run CentOS as a vm? This would give me the options to roll out other VM's if I want over the life of the server (which I likely won't need) but the

I just installed CentOS5 on my server and I have to get everything working on it. I chose to clean load it upgrading from RHEL3 to CentOS5. I'm having trouble understanding the way bind works now and was wondering if anyone has a bit of time to help me with it. I am starting from scratch and I only have my primary domain and one additional domain I host. Thanks. -- -=/>Thom

I need to experiment with ldap for a site I manage, and wondered if vmware would be a good way to go for some testing. My current server is RHEL3, which is getting dated, and I think that I should refresh this server entirely in the move to ldap. We need to have an ldap server for publishing email addresses for a VPN for a nursing home that the upstream can harvest and we can browse to send

For some reason I can't ping or communicate with two of my machines that have static IP's on my lan. My mythbe and mythfe are both set to have static ip's in the event of some sort of power problem the wife can stillwatch tv. After installing CentOS5, I can't communicate with those two machines. I read through the release notes and the docs on dhcp, but I can't seem to see

I'm having trouble getting port forwarding working on my one box. I have 2 incoming internet connections. I have 2 servers on these connections. pubinternet privinternet eth0:x.x.x.x eth0:y.y.y.y eth1:10.10.10.1 eth1:10.10.10.4 I need to be able to port forward traffic

subsequent to a fresh svn checkout, configure, make: make[5]: Leaving directory `/udd/stvjc/JEDI/R200/src/library/tools/src' make[4]: Leaving directory `/udd/stvjc/JEDI/R200/src/library/tools/src' Error in loadNamespace(package, lib.loc, keep.source, TRUE, TRUE) : 'tools' is not a valid package -- installed < 2.0.0? Execution halted make[3]: *** [all] Error 1 make[3]:

Hello, I have dedicated server on CentOS Linux 6.1 with webmin/virtualmin and it tell me: Package updates 145 updates to system packages are available. Use the Virtualmin Package Updates module to install them selectively. 4 updates to Virtualmin packages are available. Use the Virtualmin Package Updates module to install them selectively. Should I update all packages?

hello, i need to setup a mail server with postfix + dovecot + webmin + virtualmin + virtual user with linux system user. the virtual user may reach to thousands user from several hundreds virtual domains. what i concern is large numbers of linux system user which used in these setup, is it good or bad? maybe somebody would share their experience about this setup ? any links would be good.

I'm sorry if it is off-topic, maybe not. I have CentOS 6, webmin/virtualmin panel and I just install Horde 3/imp 4. In my virtualmin panel I have many email configured, but when I acces Horde and I try to login with email/password or user/password, Horde tell me login or password not good. What I have to do to synchronize Horde and virtualmin mailbox? Thanks you Ernesto

Hello all, I'm looking to setup a new CentOS box for a buddy of mine who wants to do hosting on a server via CoLo, Years ago I whipped up a CP of my own on a Debian box he colo'd running a basterdized qmail/tinydns and custom built httpd/mysql/etc (I was young). It worked ok but time to move on and I don't have time to maintain all those packages. I also don't have time to write

Hi, You need to issue two commands: /sbin/ifconfig eth0:0 xxx.xxx.xxx.xxx /sbin/route add -host xxx.xxx.xxx.xxx dev eth0 For example: /sbin/ifconfig eth0:0 172.16.1.199 /sbin/route add -host 172.16.1.199 dev eth0 You can even assign multiple aliases to one NIC (One of my servers has about 10 ip addresses): For example: /sbin/ifconfig eth0:0 172.16.1.199 /sbin/route add -host 172.16.1.199

Hello, I'm having problem connecting my Asterisk 1.4.29.1 with Digium TE420 to providers Cisco 2800 with VWIC-1MFT-E1 card. the same card runs fine with another E1 provider. TE420 led's lite green. Message type: RELEASE COMPLETE (90) < [08 02 80 ac] < Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: User (0) < Ext: 1 Cause:

I have CentOS 6 and with webmin/virtualmin panel, and each time that I reboot Apache can't start: Starting httpd: (98)Address already in use: make_sock: could not bind to address [::]:80 (98)Address already in use: make_sock: could not bind to address 0.0.0.0:80 no listening sockets available, shutting down I do: netstat -tulpn| grep :80 tcp 0 0 :::80 :::* LISTEN

On Thu, 2015-01-29 at 15:56 +0800, Kevin Laurie wrote: > Hey Joseph > Thanks. Strace seems like a very useful tool > Only problem is that I dont think it is maintained on ubuntu. > Tried to run:- > apt-get install strace but could not download it. > Might need to download and build it. Do you know any other way of getting > it? > Thanks > Kevin A. try apt-cache search

Hi I am using Centos 4.3 to host various web sites that I maintain. I am finding that I am getting more and more, and I have thought of setting up a hosting server to make things quicker for my self. I have setup webmin with virtualmin and it seems to work fine so far. What is everyone else using. I don't want to invest alot of money, but would like some thing that is quick and easy to

Hola a todos: Hace unos meses estuve preguntando sobre la prueba de Thom para comprobar la homogeneidad de series temporales sobre datos de radiación e insolación (después he visto que también se usa con otras variables meteorológicas) [0]. El caso es que por distintas razones no había podido avanzar en el asunto y ahora vuelvo sobre él. Creé una función para realizar la prueba de Thom pero

Hi I have been asked to configure an dedicated rhel6 server for a customer. I did not realise when I took this on how complicated it was going to be! The purpose of the server is to host a group of websites for small businesses. It came with postfix-2.6.6-2.2 dovecot-2.0.9 and mysql-2.1.67-1 I have installed virtualmin 3.98, usermin1.540-1 and horde 5 About a dozen currently inactive websites

Hi all I've been thinking about using CentOS on a Dell R200 server and turn it into a firewall / network monitor / traffic shaper in our datacentre, instead of using a dedicated firewall device. One of the devices that I have been looking at, with my limited budget, is the D-Link DFL 860 - http://www.netdefend.eu/Product.aspx?m=15&ref=DFL-860 It provides AV, SPI, VPN, DOS, P2P, etc

Hello list, Can anyone confirm if CentOS 5.1 works happily on a Dell R200 with a SAS 6iR RAID controller. Thanks Dean

I need a quick rundown on creating directories that get group access. I have a folder that I want everyone in the blswin32 group to be able to read and write. I set force group to blswin32 for the samba share, but it still gives me a n error opening the database. It is because I don't have read and write access to the database file. What settings do I need to make to get this to work