similar to: OT: Making BT/Yahoo account accessible to plain router

My daughter needs to send me a large file. It appears that it is getting through my ISP, but being rejected on my CentOS mail server. The message she's getting says A message that you sent could not be delivered to one or more of its recipients. This is a permanent error. The following address(es) failed: anne at localhost SMTP error: 552 5.3.4 Message size exceeds fixed limit

Are there any possible undesirable effects of a BIOS upgrade? The worst I can think of is something that would change my SATA drives from being mapped as SCSI to being mapped as IDE. Ted Miller Indiana

Hi, I seem to not be able to connect to the folding site and receive new work. Anyone else having this issue? Port 8080 is open as well as the other web ports on the firewall. I can ping the host but get nothing when I open a web browser to it. Anyone else having the same issues? Where can I look to figure this one out? -- Regards Robert Smile... it increases your face value! Linux

I'm looking for an open source router solution, and someone from the list recently recommended zebra (www.zebra.org). I haven't yet identified all my needs, but I'm guessing that it will do all my routing needs for a, say, class C set of IP addresses, particularly if I ever have to do anything BGP-related. Anyone have any pointers before I delve in? Or possibly a recommendation for

I have a quick question. The board and CPU that I'm using in one of my machines was given to me. I didn't take the time to look up the info on the board or anything. I was busy, so I just put the board in a pc case, hooked everything up, and loaded the os on the machine. I didn't know it at the time, but there's a chance it may be a 64bit board and cpu. I don't

Dear colleagues, there is a behaviour with S4 (virtual) classes that I find very hard to understand: Depending on the position of setAs(), the tree of inheritance changes. This is my baseline example that defines the classes "grandma", "mother", "daughter" and a virtual class "mr_x". For a new instance if "daughter", "mr_x" is betweeen

Hello, My machine is running Software RAID 5 on /dev/hde1, /dev/hdg1,/dev/hdi1. I noticed on the log that suddenly we are getting messages such as : Oct 14 01:27:16 localhost smartd[4801]: Device: /dev/hde, SMART Prefailure Attribute: 8 Seek_Time_Performance changed from 247 to 246 Oct 14 01:57:15 localhost smartd[4801]: Device: /dev/hde, SMART Prefailure Attribute: 8 Seek_Time_Performance

Hi List I have a Gygabyte GA-7N400 PRO2 with a 2.6 mHz Athlon cpu. I want to set up a central file storage for 2/3 users using 6/7 machines. A mixture of win2k, XP and various Linux distros (my home network). It will be used to store files, (docs, music and DVD ) for all of these machines, print server, (two ink-jets), mail server and later on a myth tv set up. Would SAMBA be the best option

Dear all I have a data.frame like that : father mother num_daughter daughter 291 3906 0 NULL 275 4219 0 NULL 273 4236 1 49410 281 4163 1 49408 274 4226 1 49406 295 3869 2 49403 49404 287 4113 0 NULL 295 3871 1 49401 292 3895 4 49396 49397 49398 49399 291 3900 3 49392 How to read it into R and transform it like that: father mother num_daughter

Here is Mexico the phone company uses a DSL router from 2Wire which in my opinion is quite bad. I am having problems getting PAP2T adapters connected to Asterisk using these routers. They connect fine but after about 5 minutes I get a message on the Asterisk console that the ATA is unreachable. So far the only way I have found for the ATA to stay connected more than five minutes is to put it in

Take this as an example: > a=data.frame(col1=c(1,2,3,4,5), col2=c ("my","beloved","daughter","son","wife")) > b=data.frame(col1=c(1,2,4), col2=c("my","beloved","son")) > a col1 col2 1 1 my 2 2 beloved 3 3 daughter 4 4 son 5 5 wife > b col1 col2 1 1 my 2

Hello, Im reading through some manuals, but I cannot find my answer. I have a file containing many data: Vpn Code Family Age F1 F2 ... F17 1 1 M 46 1 2 ... 1 2 1 D 18 3 2 ... 4 3 2 M 50 3 3 ... 3 ... and so on. Now I can read it by: F = read.table("file", header=T) but now I want to seperate the mothers (M) and daugthers (D) of the family with all the data in all other fields.

Hello all, while I''m using acts_as_audited(on jruby platform), after vendored the acts_as_audited, it reports some error, line 167, # Start observing the declared classes and their subclasses. def initialize Set.new(observed_classes + observed_subclasses).each { |klass| add_observer! klass } #this line end after some trace shows this one, when observed_classes is empty, will

Dear R users, I have a matrix with 2 columns with the variables: "daughter index", "mother index". I would like to draw a network digraph using this data, where each daughter is connected to a mother and between the connections inlcude a circle with the information on the indices ("daughter index", "mother index"): i.e. something similar to graphs

Hello: The box is dual boot (Win XP & CentOS 5). A Dell Dimension 4300 Celeron. There was an intermittent problem with this last year and last Thanksgiving, I wiped the HD and installed Win XP and CentOS 5 clean. My daughter asked me to install KStars which is in the kdeedu RPM on the Fedora Core 6 Install DVD. I did that, without any problems, on my box and on my wife's box. On the

Hi there, I'm trying to repurpose an unused machine (athlon XP 3000+) for my young daughter to use. It's on a motherboard with a VIA KT880 chipset and VIA integrated soundcard (VIA 8237). The card seems to be detected during boot time and shows up in the system log, but when I try to actually use the sound card within Gnome, there's no sound. The device is detected, but

I have a TDM400p with 3 fxs and 1 fxo daughter cards. It's in a mini-itx case with a 'right-angle' PCI riser card so the TDM400p is 'sandwiched' between the Atom D525 CPU and the 2.5" hard drive. I'm getting a bunch of clicks and pops on all ports. Has anybody had a similar experience? Did you find a solution? -- Thanks in advance,

Please chime in if you've ever wished for digium to make a 4-port daughter board with a combination of 2FXO AND 2FXS ports on the same card. When using the 800 series cards, one must either choose 4-port permutations of FXS/FXO, OR one must give up 2 valuable ports. In other words, when you add ONE 100-series daughter board, you give up TWO of your physical ports. Is there a technical

Hi there, I am growing classification trees using the 'tree' package add-on to R. I would like to convert the 'R' output to the SAS format used by Salford Systems' commercial CART software in order to interface with some other software. My question is: How can I parse the R tree data structure in order to infer the tree structure? The 'tree' class has a member

I have an embedded linux board (main board), which has multiple Ethernet interfaces, and a daughter card, which has one Ethernet interface. The diagram is shown as following. +---------+ +----------------------------+ | daughter |--------------------| ptp |---------------- | card | Ethernet |