similar to: which centos for 486

I was installing centos 5.3 x86_64 on a sempron 2.7G machine with 512M ram. The install started off fine then REALLY SLOWED down about 70% into install. I did have a swap space. after that it just crawled. I tried restart the install a couple times at 512M. Same thing around 70% the slow down. I then put in 1G of RAM and everything zipped on past and finished fine. Does 5.3 have minimum

On my machine I have SATA0: HD SATA1: HD these two drives are set as RAID1 SATA2: HD extra SATA3: DVD SATA4: external USB disk Snip from dmesg shows the ATAPI device being detected. ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xe400 irq 10 ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xe408 irq 10 ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ATAPI: PIONEER BD-ROM

I tried install 4.4 on an old Via 800mhz box. i386 of course. The installer dies pretty quick. I thought the via was i386 compatible? Is there something special to do. Jerry

I am sending an email from my machine devcentos5x64. the transcript below (hangs for 60 seconds) at the line: MAIL From:<root at devcentos5x64.msgnet.com> SIZE=56 AUTH=root at devcentos5x64.msgnet.com The email succeeds - but I am trying to figure out the 60 second delay. Neither email server is busy. Nothing is waiting. the DNS on both machines point to the same nameserver. The DNS

Is there a method to get a 586 (i586 text) install to a 486 level? I am looking for information guidance on this. I have looked into using debian/386 which stinks in my opinion, slackware doesnt quite have it either. So I am wishing/hoping there is a NOT TO painful way to get a 586 install to run on a 486 chip. I have been searching but havent found anything useful. If anyone knows what might

To continue here with problems on this compaq v2000 laptop, I put kernel source on a USB disk and plugged it into the v2000. NOTHING IS recognized. I tried to manually mount the disk and nothing either... I thought USB was well established.... I thought trying to recompile the kernel for realtek support might get my networking going... I am stuck??? Jerry -------------- next part

hi all, running centos 4.7 i686. I seem to have an o pen r elay sendmail server. How do I close it? I have the STRAIGHT centos install sendmail.mc file. Only thing I changed was: dnl DAEMON_OPTIONS(`Port=smtp,Addr=127.0.0.1, Name=MTA')dnl so as to allow incoming email and not just localhost. however this seems to relay everyone. I looked at http://www.sendmail.org/tips/relaying but it

I am trying to hwclock to set the time. (hwclock -w) this is what I get on standard 5.2 x86_64. hwclock --debug hwclock from util-linux-2.13-pre7 hwclock: Open of /dev/rtc failed, errno=19: No such device. No usable clock interface found. Cannot access the Hardware Clock via any known method. [root at devcentos5x64 src]# ls -l /dev/rtc crw------- 1 root root 10, 135 Feb 6 13:32 /dev/rtc Any

I am trying to plug a USB 2 device in a USB 3 slot. Nothing is being detected in "lsusb". Is there something special I need to do? I am running centos 5.5 x86_64. I thought 3.0 was backward compatible. Nothing special about my device its an RS232 to USB device. It works in 2.0 slot. Thanks, Jerry

What is needed to get DAHDI to start up correctly on CentOS 7 and systemd... I am using DAHDI-linux-complete 2.11.1 I saw mention in my search that it has been fixed after 2.11.1 but cannot find what the fix is. Thanks, Jerry -------------- next part -------------- An HTML attachment was scrubbed... URL:

I was just wondering if there are special tricks people do that compile A LOT on centos? Do RAM disks help or something else I dont about that minimizes your compile time? I presently have and AMD x2 4800+ with 2GIG ram. Just curious if I can reduce any more time out of my compiles. Jerry

I am trying to do an rsync or scp from machine1 to machine2. I am getting arg list to long. I am using centos 5 machine 1 and centos 4.5 on machine2. I am using the default shell which is bash. How can I get past this? THanks, Jerry

I am wanting to use the mkfs.hfsplus as mentioned here http://www.oli.id.au/createosxdmgdiskimagesinlinux but I dont have the command. yum provides "*/mkfs.hfsplus" returns no packages found. Where do I find this command? Thanks. Jerry

Hi Is there any way to re-export an nfs mounted directory? I am having three servers runnning on centos4.5 and i am trying to implement nfs share in an below manner [bcoz there is no alternative way for me to setup nfs share] HOST A--->>>EXPORTS /prod/data ------->>>HOST B HOST B ---->>MOUNTED ------>>> /prod/data-----UNDER---/PROD1 [working fine] HOST B

I have added the three lines to the sip.conf file based on the latest changes from broadvoice. I can receive incoming calls but cannot place any outgoing calls. The error I get is: *CLI> -- Registered to '69.73.19.178', who sees us as IPADDRESS:4569 -- Attempting call on SIP/Broadvoice/5068012 for application Playback(demo-congrats) (Retry 1) Mar 8 08:35:21 NOTICE[29290]:

Hi, When I boot my dedicated server from netinstall cd, I see: http://img501.imageshack.us/img501/3828/kernelpaniczm7.jpg System: Intel(R) Celeron(R) CPU 2.60GHz - Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] - Host bridge: VIA Technologies, Inc. P4M266 Host Bridge - IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE - ISA bridge: VIA

Apparently Verizon is blocking or changing packets on port 5060 so my softphone from my hotspot will not work. How do I set asterisk (11.23.0) to run default 5060 for all other devices I have - BUT for my software run on a different port like 5070? I'm using linphone and is easy to change the ports from 5060 to 5070 ( I think). Thanks, Jerry -------------- next part -------------- An HTML

I have used the handytone 488 from grandstream in the past.... However I need to be able to send a number to a unit like the 488 and have it dial out. Is there a unit like this available? Basically a 488 unit that can place a call out. Jerry

So both "yum upgrade" and "yum update" now are complete and there's no new packages. However, when I attempt to check my version, I'm still showing 5. # cat /etc/redhat-release CentOS release 5 (Final) I remember seeing 5.1 repositories being access for the upgrades. Is it possible my system did not upgrade? # uname -r 2.6.18-53.1.4.el5.centos.plus Thanks, Scott

The new virtual machine manager in Centos 5.1 displays some weird behavior here and I assume it's because the UUID of one running VM is the same as of a VM that is shut down. I used the same config file template for creating all my test VMs, so several have the same UUID. Didn't produce any problems with xm. But the new VM manager in Gnome shows active and inactive VMs and identifies