similar to: Problems installing 5.1 on a Tyan Thunder HEsl with a SCSI controller

I've been checking out this and like the looks of it. http://www.tyan.com/products/html/gt24b2891.html I was told the onboard SATA RAID controller can only be used by windows. However, others have told me that there is no problem using it with linux. Anyone used the Tyan Transport GT24 (TYAN Thunder K8SRE s2891 motherboard)? Good choice for a CentOS server? Thanks, Josh

Tyan has posted a lm_sensors config file for the Thunder K8SE S2892 at ftp://ftp.tyan.com/software/lms/lms_s2892.conf However when I ran the sensors command on my S2892 I was getting a readout for an adt7463 chip that wasn't referenced in the config file. I emailed Raphael Deng at Tyan asking him to confirm the manual edit needed to get sensors.conf to refer to the adt7463 chip. His

I had my eye on the Tyan dual-Opteron mobos for awhile. I tried to find a posting *anywhere* sharing experiences with these boards under Linux. No such luck. So placing myself under the heading "Where Angles Fear to Tread," I went ahead and built a system anyway. Here's what I've learned. The specs: Tyan Thunder K8SE S2892, BIOS 1.01 2x Opteron 270, 2Ghz Dual-Core, retail

I've encountered an odd error state that I haven't been able to resolve yet. I have a customer that, for what ever reason, wants to use active mode occasionally for FTP xfers. What they have noticed, is that after you switch to active, and issue a command (they do 'ls', I've done other things like 'put' and 'get', etc.), the connection hangs. If you wait a

Dear list, is anyone using a Tyan Thunder K8HM (S3892) with Xen? Or can recommand a (different) mainboard for: - dual dual-core opteron - about 16GB of RAM - two Gbit ports (for GNBD) - one (or more) SATA ports (system disk) - at last one PCI-X 133 slot. Thanks a lot. -- /"\ Goetz Bock at blacknet dot de -- secure mobile Linux everNETting \ / (c) 2006 Creative Commons,

Hi folks, an Asterisk (www.asterisk.org) box will be built with the following specs and I wanted to know if CENTOS has a built process/config/parameter/special distro to target the AMD Opteron Dual Core plataform: 2 amd opteron 265 dual core 1.8 Ghz 2mb l2 cache 2x1024 ocz c2-6400 dual channel gold GX XTC 2 Seagate 16mb cache 300 GB barracuda 7200 drives another 2 Seagate 500 GB 16mb cache

I'm try to bond a few interfaces together with the hopes of getting increased throughput, and I'm using a cisco Catalyst 2900 as the switch. I've tried using mode 0, 5, and 6 with nothing special on the switch, and mode 4 with some ports "trunked" together (I have a feeling that the "trunking" that the 2900 does is not 802.3ad, as it disabled the ports it saw as

I am trying to install CentOS to a server that has a Tyan S2891 motherboard, 2 Opteron 875 Dual Cores and 2GB of RAM. I have been able trying to install over a network but the tg3 driver will not load. I then installed from a DVD and on rebooting after the installation I cannot get the network drivers to load and the RAID controller in the PCI slot is not available. It seems that when I do an

I have a Tyan Thunder K8HM (S3892) motherboard and I am trying to get lm_sensors to work with it. The problem is that I am getting conflicting information. The source for lm_sensors says not to compile the modules for the 2.6 kernel. The information from Tyan says that I need to compile the modules if my kernel is less than 2.6.12. Has anyone here configured lm_sensors for this motherboard?

We've had a spate of these lately - about 3 or 4 boxes. I have a feeling we just got a bad run of motherboards, but thought I'd try to get some feedback. These are servers running with the Tyan Thunder K8SD (dual core AMD's, S2882 model). They have three onboard NIC's, two Broadcom gig NIC's BCM5704C's and an Intel 82551QM which is a 10/100 board. We use the

We have been seeing failures with CentOS 4.4 i386 (not x86_64) running compute-intensive programs on Tyan K8SRE (S2891) Tymotherboards, running Opteron 265's. This motherboard is used in the Tyan barebones box GT24 (B2881). We have these boards populated with 8GB of RAM, consisting of mixed 2GB and 1GB sticks. The symptom is that CPU-bound programs (may or may not be related to floating

Dear Sirs. It seems to me a never ending story. We run a box with a TYAN Thunder 2500 Dual SMP mainboard, 2GB ECC Tyan certified memory, AMI Enterprise 1600 RAID adapter and additional Intel 1000/Pro server type (64 bit) GBit LAN NIC. With FreeBSD 4.8 this was stable, but to achive this state was really hard! It is a story similar to that what happend when we changed towards FreeBSD

https://bugs.freedesktop.org/show_bug.cgi?id=87934 Bug ID: 87934 Summary: nouveau errors on archlinux while running War Thunder native (not via steam) Product: Mesa Version: unspecified Hardware: x86-64 (AMD64) OS: Linux (All) Status: NEW Severity: normal Priority: medium

Hello I do have problem using Linux with an external HP tape drive. The server platform is also an HP Server; the server is an HP ML350 G4, and the Tape drive is a HP Storage Works Ultrium 448 - 1U Rack-mountable. HP Ultrium documentation says two drivers should be automatically up, sym53c8xx for LSI SCSI interface "st" for tape and /proc/scsi/scsi should contain information about

I want to know if I buy a Tyan Transport GX28 (B2881) will it work with a TDM400 card? As the expansion slots are only (2) 64-bit 133/100MHz PCI-X. I never tried PCI 2.2 compliant card in a PCI-X slot so I don't know if it can even fit in the slot and if it does will it be seen? Thanks Martin Roy

Was wondering if anyone has any luck with the Tyan s4985 motherboard, I had loaded up the latest 5.4 release and in installed most everything that I wanted but when I loaded it up, as in processor wise it would lock up. Funny thing I could still ssh to it but not do a su - or anything from the console. I think it is kernel related and tried the previous kernel but it still exhibited the same

Trying to get cpu temps from lm_sensors for a Tyan s4985 motherboard, just installed centos 5.4. Tyan release some lm_sensors conf files and other information which I have done, but I am not getting any cpu temps. I was wondering if anyone out there was running this board and if you have gotten temps working for your cpu, here is my output...Thanks in advance. w83627hf-isa-0c00 Adapter: ISA

A couple of months ago I reported some problems with a batch of Tyan K8SSA (S3870) based machines. We are continuing to have an odd problem with these boxes, and if anyone has seen something similar elsewhere, I'd appreciate hearing about it. These boxes are running Centos 4.4 x86_64 with kernel 2.6.9-42.0.3.ELsmp. They are dual Opteron 265's (dual core) with 4x2GB DIMM's. The

Hi Everybody, Does anyone could install CentOS 4.4 on Tyan Teledo i3010w (S5197) successfully ? without any kernel parameter when boot up. I haven't buy it yet. But I want to make sure it works with CentOS 4.4. Thanks. Ceg Ryan -------------- next part -------------- An HTML attachment was scrubbed... URL:

It seems that unstable PowerNow support on the Tyan S2895 is not limited to Linux according to this review: http://www.hardcoreware.net/reviews/review-296-1.htm Their solution was to upgrade the BIOS as well. -- Bryan J. Smith b.j.smith at ieee.org http://thebs413.blogspot.com ---------------------------------------------------------------------- The best things in life are NOT