similar to: raid1 disk format?

Hello, Having a problem with software RAID that is driving me crazy. Here's the details: 1. CentOS 6.2 x86_64 install from the minimal iso (via pxeboot). 2. Reasonably good PC hardware (i.e. not budget, but not server grade either) with a pair of 1TB Western Digital SATA3 Drives. 3. Drives are plugged into the SATA3 ports on the mainboard (both drives and cables say they can do 6Gb/s). 4.

Hi list, I'm new with UEFI and GPT. For several years I've used MBR partition table. I've installed my system on software raid1 (mdadm) using md0(sda1,sdb1) for swap, md1(sda2, sdb2) for /, md2 (sda3,sdb3) for /home. From several how-to concerning raid1 installation, I must put each partition on a different md devices. I've asked times ago if it's more correct create the

Hi. CENTOS 7.6.1810, fresh install - use this as a base to create/upgrade new/old machines. I was trying to setup two disks as a RAID1 array, using these lines mdadm --create --verbose /dev/md0 --level=0 --raid-devices=2 /dev/sdb1 /dev/sdc1 mdadm --create --verbose /dev/md1 --level=0 --raid-devices=2 /dev/sdb2 /dev/sdc2 mdadm --create --verbose /dev/md2 --level=0 --raid-devices=2

System is CentOS 6 all up to date, previously had two drives in MD RAID configuration. md0: sda1/sdb1, 20 GB, OS / Partition md1: sda2/sdb2, 1 TB, data mounted as /home Installed kmod ZFS via yum, reboot, zpool works fine. Backed up the /home data 2x, then stopped the sd[ab]2 partition with: mdadm --stop /dev/md1; mdadm --zero-superblock /dev/sd[ab]1; Removed /home in /etc/fstab. Used

I am running software RAID1 on a somewhat critical server. Today I noticed one drive is giving errors. Good thing I had RAID. I planned on upgrading this server in next month or so. Just wandering if there was an easy way to fix this to avoid rushing the upgrade? Having a single drive is slowing down reads as well, I think. Thanks. Feb 7 15:28:28 server smartd[2980]: Device: /dev/sdb

hi all! back in Aug several of you assisted me in solving a problem where one of my drives had dropped out of (or been kicked out of) the raid1 array. something vaguely similar appears to have happened just a few mins ago, upon rebooting after a small update. I received four emails like this, one for /dev/md0, one for /dev/md1, one for /dev/md125 and one for /dev/md126: Subject: DegradedArray

I have followed the procedure on the Centos page: http://wiki.centos.org/HowTos/CentOS5ConvertToRAID My setup is slightly different. I am using two partitions, / and /home. I have setup swap as a file, /home/swapfile. My hard drives are 500Gig sda and sdb. In modifying the instructions for initializing sdb I have: used /dev/md0 for / (sdb1) used /dev/md1 for /home (sdb2) In section 3.6 The

I think I have solved my issue and would like some input from anyone who has done this for pitfalls, errors, or if I am just wrong. Centos 5.x, software raid, 250gb drives. 2 drives in mirror, one spare. All same size. 2 devices in the mirror, one boot (about 100MB), one that fills the rest of disk and contains LVM partitions. I was thinking of taking out the spare and adding a 500gb drive. I

Hi all, This morning I received this notification from mdadm: This is an automatically generated mail message from mdadm running on server-mail.mydomain.kom A Fail event had been detected on md device /dev/md1. Faithfully yours, etc. In /proc/mdstat I see this: Personalities : [raid1] md1 : active raid1 sdb2[2](F) sda2[0] 77842880 blocks [2/1] [U_] md0 : active raid1 sdb1[1] sda1[0]

I'm using Centos 4.5 right now, and I had a RAID 5 array stop because two drives became unavailable. After adjusting the cables on several occasions and shutting down and restarting, I was able to see the drives again. This is when I snatched defeat from the jaws of victory. Please, someone with vast knowledge of how RAID 5 with mdadm works, tell me if I have any chance at all

Hi, I have a RAID 1 (using mdadm) on CentOS Linux and in /proc/mdstat I see this: md7 : active raid1 sda2[0] sdb2[1] 26627648 blocks [2/2] [UU] [-->> it's OK] md1 : active raid1 sdb3[1] sda3[0] 4192896 blocks [2/2] [UU] [-->> it's OK] md2 : active raid1 sda5[0] sdb5[1] 4192832 blocks [2/2] [UU] [-->> it's OK] md3 : active raid1 sdb6[1] sda6[0] 4192832 blocks [2/2]

Hi all, As part of my raid experience, I have yet to have to do this, but was wondering how you guys would attempt it. I have 3 drives in a raid 1, with one as a hot spare. They are 250gb with all space used by two raid devices, 1 with boot, the other with LVMs filling them up. Now, lets say down the road I want to put in 500gb drives and replace them....yikes. I was thinking of taking out the

I just installed CentOS 5.4 64 bit release on a 1.9ghz CPU with 8gB of RAM. It has 2 Western Digital 1.5TB SATA2 drives in RAID1. [root at server ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/md2 1.4T 1.4G 1.3T 1% / /dev/md0 99M 19M 76M 20% /boot tmpfs 4.0G 0 4.0G 0% /dev/shm [root at server ~]# Its barebones

Hello, i have a little problem. Our server has an broken RAID. # cat /proc/mdstat Personalities : [raid1] md0 : active raid1 sda1[2](F) sdb1[1] 2096064 blocks [2/1] [_U] md2 : active raid1 sda3[2](F) sdb3[1] 1462516672 blocks [2/1] [_U] md1 : active raid1 sda2[0] sdb2[1] 524224 blocks [2/2] [UU] unused devices: <none> I have remove the partition: # mdadm --remove

I am planning to increase the disk space on my desktop system. It is running CentOS 5.9 w/XEN. I have two 160Gig 2.5" laptop (2.5") SATA drives in two slots of a 4-slot hot swap bay configured like this: Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End

On 04/23/2022 09:19 PM, H wrote: > On 04/19/2022 09:57 AM, Roberto Ragusa wrote: >> On 4/18/22 1:27 PM, H wrote: >>> I have a new computer with 2 x 2TB SSDs where I wanted to install C7 and use mdadm for RAID1 configuration and encrypting the /home partition. On the net I found https://tuxfixer.com/centos-7-installation-with-lvm-raid-1-mirroring/ which I adopted slightly with

Hello All, on a Centos5 system installed with software raid I'm getting: raid1: raid set md127 active with 2 out of 2 mirrors md:.... autorun DONE md: Autodetecting RAID arrays md: autorun..... md : autorun DONE trying to resume form /dev/md1 creating root device mounting root device mounting root filesystem ext3-fs : unable to read superblock mount :

Hi All, I'm currently trying to install centos 5.4 x86-64bit on a raid 1, so if one the 2 disks fails the server will still be available. i installed grub on /dev/sda using the advanced grub configuration option during the install. after the install is done i boot in linux rescue mode , chroot the filesystem and copy grub to both drives using: grub>root (hd0,0) grub>setup (hd0)

I installed Centos 6.x 64 bit with the minimal ISO and used two disks in RAID 1 array. Filesystem Size Used Avail Use% Mounted on /dev/md2 97G 918M 91G 1% / tmpfs 16G 0 16G 0% /dev/shm /dev/md1 485M 54M 407M 12% /boot /dev/md3 3.4T 198M 3.2T 1% /vz Personalities : [raid1] md1 : active raid1 sda1[0] sdb1[1] 511936 blocks super 1.0

I just replaced two md-raided (RAID1) disks with bigger ones and decided to check out how far I get with them when I put them in another machine. The kernel boots and then panics when it wants to mount the root filesystem on the disk. md: Autodetecting RAID arrays md: autorun md: autorun DONE < not sure if this means it was successful or failed, I rather think it failed because it