similar to: Asus M3A78-EMH HDMI NCQ-issues

Hi all, Another FYI-mail (and just to verify that I'm not going insane here); I recently purchased an ASUS M3A78-EMH HDMI -board with a tri-core Phenom. This is a small uATX-board with all the garnish integrated motherboards are supposed to come with, and fairly well supported in CentOS 5 and other modern distros. When I installed it (~2 months ago) the NIC was not supported; Ethernet

Hi all, I'm wondering if I'm running into some dependency issues on my CentOS5 test-machines. I've installed with a fairly minimal package set, updated, removed old kernels and am now experimenting with iscsi and gfs. I think I need kmod-gfs to get gfs -support, but there is only a version that suits the base-kernel, 2.6.18-8.el5. " [root at node02 ~]# yum install kmod-gfs

Hello Sir, (This applies to the RH8.0 supplied syslinux 1.75-3 and the upgraded tftp-server-0.32-1 from RH Rawhide) I'm having fun remotebooting my ViA EPIA box (an ITX form-factor 800MHz ViA C3 semi-embedded pc), and have landed on pxeboot as the 'best tool for the job'. Right now I have it working, but the documentation found elsewhere on the web has confused me. Specifically,

Hi list, I'm having one of those 'I'm stupid' -problems with LVM on CentOS 5.2. I've been working with traditional partitions until now, but I've finally been sold on the theoretical benefits of using LVM, but for now I only have a huge pile of broken filesystems to show for my efforts. My scenario; I attach a disk, either over USB or iSCSI. I create a PV on this

I have previously written about a mountroot prompt, here are some details. I have a system with an asus m3a78-emh hdmi board, a 74 gig raptor drive, and a dual core amd am2 cpu. I have had this result with both the amd64 and i386 systems. My steps were all conducted today as follows. install 7.0 release run freebsd-update get src tree build world build and install kernel reboot and be greeted

hello, yet another powerd SOS : on an ASUS M3A78-EM MB with Phenom 9750 and 8 gig memory, starting powerd freezes the box after slowing down a bit cpu frequency. [IMHO] usefull bit of info : FreeBSD m34.scito.local 7.1-PRERELEASE FreeBSD 7.1-PRERELEASE #0: Thu Dec 11 14:24:39 CET 2008 root@m34.scito.local:/usr/obj/raid1/bsd/src7/sys/M3A78-EM amd64 CPU: AMD Phenom(tm) 9750 Quad-Core

Hello, I was wondering if anyone could point me in the right direction? I am receiving these in my log file and do not know what they mean or what to look for; Mar 8 04:03:56 bms kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Mar 8 04:03:56 bms kernel: ata3.00: cmd 25/00:28:42:d3:37/00:00:13:00:00/e0 tag 0 cdb 0x0 data 20480 in Mar 8 04:03:56 bms kernel: res

hi, we've got a server with 6 sata disk (2 system raid1, 4 data raid5). recently we've got such error is the log and in these case the system is totally hang ie. it seems to crash but after 30-40 sec is start to working. we already 2 times replace the sata cables the problem still arrise what's more with different data disk (so not the same). we assume it can be some kind of sata

> > [ 2.183682] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > [ 2.183825] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) > [ 7.183893] ata3.00: qc timeout (cmd 0xec) > [ 7.183908] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4) > [ 7.183960] ata4.00: qc timeout (cmd 0xa1) > [ 7.183974] ata4.00: failed to IDENTIFY (I/O error,

> > > > > [root at darkness ~]# ls -al /dev/sr* > > ls: cannot access /dev/sr*: No such file or directory > > [root at darkness ~]# ls /dev/s* > > /dev/sda /dev/sda3 /dev/sdb1 /dev/sg0 /dev/stderr > > /dev/sda1 /dev/sda4 /dev/sdb2 /dev/sg1 /dev/stdin > > /dev/sda2 /dev/sdb /dev/sdb3 /dev/snapshot /dev/stdout > > [root at

Hi all, I think I've spotted a few stupidities (bugs) in the current version of kernel-utils (kernel-utils-2.4-13.1.80). I'm sure these are all propagated from upstream, but I hope someone could have a quick look to verify this and see if we either can push complaints upwards, or provide local fixes. The kernel-utils package provides several 'kernel-type' functions -

Hi all, I've upgraded my mysql-installation from the previous 4.1.12 version to the new 4.1.20 version, and I've found that a daemon I'm using suddenly can't log into the database anymore. I've verified the problem with the mysql command; [root at sciream ~]# mysql -upostfix -p mysql Enter password: ERROR 1045 (28000): Access denied for user

CentOS 4.3 (SMP, x86_64, Athlon64 X2) with all pre-4.4 release updates applied. Since I ran into the Yum issue at the previous upgrade, I first did yum upgrade to get the list of packages (6 to install, 206 to update). I then did yum upgrade yum (which passed without issues) yum upgrade sqlite (which passed without isseus). Fairly certain that yum now works correctly, I wanted to just do

Hi people, I ran into one of these silly issues I'd like to share as I think the reason behind it may be a flaw in the current initrds. The setup; Dual-Xeon Intel-chipset motherboard. SATA-disk attached to ICH, onboard Adaptec SCSI-controller. Installed system, updated packages, no problems. Basic, non-LVM partition setup - OS-disk is /dev/sda, single filesystem-partition /dev/sda1 is

On my machine I have SATA0: HD SATA1: HD these two drives are set as RAID1 SATA2: HD extra SATA3: DVD SATA4: external USB disk Snip from dmesg shows the ATAPI device being detected. ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xe400 irq 10 ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xe408 irq 10 ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ATAPI: PIONEER BD-ROM

Hi List, I've started looking into iSCSI, and I'm wondering if there is an iSCSI target (I've found the initiator in iscsi-initiator-utils) that ships with CentOS, or if not, what the recommended target would be. I'd like to export either a partition or (preferably) a file-as-a-partition. Yours, -S -- Simen Thoresen, Wulfkit Support, Dolphin ICS

Hi all, I have a Opteron-machine with the MPT SCSI-controller (Symbios 53c1030). At least in i386-mode, mkinitrd does not seem to build a usable initrd for 2.6.13.x (.3 tested) with this kernel. With 2.6.12.6 it works fine. I have not tested this in x86_64 -mode yet. The symptom is that mptbase and mptscsih load, but mptscsih does not discover any controllers nor drives, and things like

Hi all, Same system as my previous mail - Asus P5N32-E SLI motherboards, CentOS 4 x86_64. The kernel-supplied forcedeth driver works in kernel-smp-2.6.9-55.0.9.EL (both with and without acpi=off), but after upgrading to kernel-smp-2.6.9-67.0.4.EL, networking does not start. After trying dhcp, ifconfig reports 17 dropped TX packets (all other counters are empty). Ethtool reports the same

I have no output in the logs, but /etc/init.d/network restart fixes the issue. I am rsync/scp (10GB) data from one 100MB Full duplex host to an ASUS M3A78-EM (RTL8111B/C). It locks up around the 1.5GB Tx mark. If I ethtool -s eth0 autoneg off speed 100 duplex full it does not happen again. Ideas? -- -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- -

Hi all, I'm trying to troubleshoot my way thru a ACPI-issue on several machines with the Asus P5N32-E SLI motherboard (S775, Nvidia 680i chipset) http://www.asus.com/products.aspx?l1=3&l2=11&l3=397&l4=0&model=1459&modelmenu=1 This is CentOS 4 x86_64, and appears on all tested kernels, including kernel-smp-2.6.9-67.0.4.EL My symptoms are that the machine won't