similar to: Printing to remote usb printer

I've been trying every combination possible to get CUPS on LM9 to print to a shared printer on a windows machine. On setting up the printer in printerdrake, On LM8.1 it worked first time. On LM8.2 with the same settings it worked first time. On LM9 it just sits there and laughs at me, with the same settings as LM8.1 and LM8.2. And how do i remove a default printer it thinks it has but

Paul Janzen wrote on Samba digest: > Message: 7 > To: Gerald Carter <jerry@samba.org> > Cc: samba@lists.samba.org > From: Paul Janzen <pcj@samba.sez.to> > Subject: cups raw mode, was Re: [Samba] unlink data file in cups_job_submit > Date: 21 Sep 2002 12:09:23 -0700 > > > Gerald Carter <jerry@samba.org> writes: > > > Looks right to

Since I sent my original question last week, this is one of two suggestions that worked. Using Adobe Acrobat, as suggested by Professor Ripley, was very satisfactory, but required that I use multiple platforms to make the conversion to PDF (from Linux to Windows). The solution by Peter Adorjan (included below), also worked very well, and can be carried out on any platform using tools available

Hi I've recently upgraded to 3.0.2 from 2.2.8 on Redhat 9. We have 2 Linux servers and a number of windows XP machines. The primary domain controller has a printer which is shared and to which all the computers have access. Since upgrading, the other Linux server cannot print to shared printers on the primary linux controller or on windows machines and cannot install new shared printers from

Hi I've recently upgraded to 3.0.2 from 2.2.8 on Redhat 9. We have 2 Linux servers and a number of windows XP machines. The primary domain controller has a printer which is shared and to which all the computers have access. Since upgrading, the other Linux server cannot print to shared printers on the primary linux controller or on windows machines and cannot install new shared printers from

Hello, I am having a problem when printing pdf files as viewed from firefox/acroread to a samba print share. When I print from firefox, I get PJL output. If I print the very same file directly from Acrobat, the file prints properly. Standard web pages print from firfox just fine. #Sample output -12345X@PJL COMMENT MS PCLXL NT DRIVER @PJl JOB NAME ... I can print from firefox/acroread

Hi, I know this subject appeared a few times on this list, but I've tried some of solutiuons presented there, and nothing works. I have a CUPS server and HP LaserJet 2200 printer. I downloaded postscript driver for this printer from cups.org, installed it in CUPS and then installed it using cupsaddsmb in Samba. This driver now installs automatically on my Windows clients. Problem is that

Volker Lendecke wrote on Samba-digest: > Message: 10 > From: <Volker.Lendecke@SerNet.DE> > To: jerry@samba.org > Cc: tombork@web.de, Volker.Lendecke@SerNet.DE, samba@lists.samba.org > Subject: Re: [Samba] 2.2.6 and printer questions > Reply-To: Volker.Lendecke@SerNet.DE > Date: Mon, 04 Nov 2002 08:54:01 +0100 > Organization: Service Network GmbH, Goettingen,

Hi I am currently using Samba 3.0.11 and Cups 1.1.23 with Windows PostScript drivers and manufacturer PPDs on WinXP clients. When I print multiples copies of a document from a Windows XP box, the number of copies appearing in the Cups "page_log" file always takes the "1" value but the printer prints the correct number of copies. When I do the same on Linux (with the lpr

On Samba-digest, Richard M. Shepard wrote > Message: 1 > Date: Sat, 12 Oct 2002 11:14:42 -0600 (MDT) > From: Robert M Shepard <bob@rmshep.mt.net> > To: samba@lists.samba.org > Subject: [Samba] rpcclient error > > > I am setting up a linux box (redhat 7.3) to server as a printer server on > a windows NT network. This is the second server I have set up. The

I can't get my HP DeskJet D2345 (USB) to work on my CentOS 5.3 machine. It'll work on another machine (with Fedora 7). I compared the installation details (in CUPS http://localhost:631) - seems that Cent does not have the driver. On the F7 machine, the device is "D2345 (HP D2300 series)" and the driver is "HP DeskJet D2300 Foomatic/hpijs". When I try to config my

The Adobe drivers (on request of the printer PPD associated with them) often put a PJL header in front of the main PostScript part of the print file. Thus, the printfile starts with <1B >%-12345X or <escape>%-12345X instead of %!PS). This leads to the CUPS daemon auto-typing the incoming file as a print-ready file, not initiating a pass through the pstops filter (to speak more

Hi everyone, I have a properly configured printer (with cups) attached to the computer running the samba server. It prints when issued within the command line (lp). When I try to print via samba, the printer doesn't react. I have configured the smb.conf using the man page of cupsaddsmb. The samba log files don't report anything at all (tried to turn the verbose loggin but failed). The

I've "inherited" an old Lexmark Z11 and would like to plug it in to my CentOS 4 box as a second printer. I shut down, hooked it up to the parallel port, rebooted, and hwbrowser recognizes it on /dev/lp0, so I ran through setting it up as a queue with printconf-gui. However, printing the test page fails because the renderer "lz11.foomatic" is not found (details below for

The Highlights: -CentOS 4.4 & CUPS -HPLIP Installed -Running as server, no GUI. -Can print from command-line no problem. -Printing from Windows XP via Samba puts job in the correct queue, job is processed but not parsed or rendered. The job is removed from the queue, but never prints. (I've RTFM and google'd it, no avail...) Help?? When printing from commandline (eg. cat file

Have just upgraded from 3.0.13 to 3.0.20 on our Solaris domain controller. Machine is also print server running CUPS-1.1.23. We have a RICOH network printer that we print to via Samba (the printer seems to have a builtin Windows PC). smbspool is linked to /usr/lib/cups/backend/smb and the appropriate DeviceURI is in /etc/cups/printers.conf. This works fine with 3.0.13, but with 3.0.20 I get this

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello, everyone - I've been trying for two weeks now to get my print server operational under Samba. After walking through the howtos and tweaking the configs per spec, it just ain't working. Printing from a client machine sends, and then nothing happens. No error messages or anything similar. Printing from the server works fine, but

Michael E. Johnson wrote on samba-digest: > Message: 6 > From: "Michael E Johnson" <johnsme@musc.edu> > To: <samba@lists.samba.org> > Date: Wed, 16 Oct 2002 11:51:09 -0400 > Subject: [Samba] Windows Drivers and SAMBA > > This is a multi-part message in MIME format. > > ------=_NextPart_000_0022_01C2750A.519B4C10 > Content-Type: text/plain;

I am setting up printing services on a Suse 10.1 server useing Samba 3.0.22 I can create a printer on an XP client and connect to the Samba printer share. I can the print a test page from XP. The print file gets to the server (see logs below), but nothing prints I can print files from Linux to the printer OK Any suggestions will be appreciated ++++++++++ smb.conf ++++++++++ [global] workgroup

I am setting up printing services on a Suse 10.1 server useing Samba 3.0.22 I can create a printer on an XP client and connect to the Samba printer share. I can the print a test page from XP. The print file gets to the server (see logs below), but nothing prints I can print files from Linux to the printer OK Any suggestions will be appreciated ++++++++++ smb.conf ++++++++++ [global] workgroup