similar to: get widescreen 1280x800 for intel 965GM chipset

I am the tech guy for a local library. We have a network containing several diskless workstations. The hardware are these P4 boxes: http://www.geeks.com/details.asp?invtid=SAMBA845V-24-4-R&cat=SYS (We have inserted additional memory, bringing most of the machines up to 1.25Gig of memory, and two up to 2Gig of memory.) These little machines have integrated Intel video chips on their

I just migrated my working Fedora Core 8 desktop to CentOS 5.1 and went from my nice 1680x1050 resolution to 1280x1024. I have made all the possible xorg.conf changes I found on the net to no avail. I tried system-config-display ?reconfig and it allows me to pick the resolution but reverts back to 1280x1024 in X? Anyone know what might need to be done in CentOS for this to work? The skewed aspect

I am attempting to setup a dell inspirons 1200 laptop media accelerator 900 from intel is the chipset so I am using the i810 driver. In the default 1024x768 everything is fine. I am trying to setup the external port not the LCD to be 1366x768. I added a modeline to xorg.conf of: Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor"

Hi, Did anyone manage to get 4.4 working on a Dell D620 laptop? The thing has a 1440x900 LCD screen, but I don't get X the work with that resolution. (lspci: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03)) Google suggested to use '915resolution', which I installed (915resolution-0.5.2-1.el4.rf), but that doesn't help. Regards, --

Tested with a Dell Vostro 1320 laptop. After booting with 'MENU RESOLUTION 1280 800' in config file, this is the ouput of 'hwinfo --framebuffer': 02: None 00.0: 11001 VESA Framebuffer [Created at bios.459] Unique ID: rdCR.fRULN9k9OD4 Hardware Class: framebuffer Model: "Intel(r)Cantiga Graphics Controller" Vendor: "Intel Corporation" Device:

I have an i810 chipset and am trying to set a custom mode. X is not taking that mode. Has anyone else run into this situation? How do I get X to take the mode on an i810 driver. Jerry

I just put a 1680x1050 LCD monitor on my home system, and I went into system-config-display to configure it as such, and it just won't take. I had to tweak some of the settings by hand, but when I log out, I get the wide screen for both the Nvidia driver splash screen and the login screen. But, when I log in, It jumps back to 1280x1024 and refuses to run in wide screen mode. Here's the

Hello, I am having problems with video in X. I get an over frequency issue using the stock CentOS 4.2 driver. I have searched IBM and Intel for the driver but no luck. Occassionally I see something about need to load a kernel module for agpgart. How do I do this? Anyone have a similar setup or know where I can find the driver? TIA

Hi Everybody, I''m a using xen for my first time in a debian sarge using the testing repository of Xen. I have the following problem: When boot with kernel 2.6.11-ksxen0, after a day or some running, the X crash and then the machine reboots. Will it''s running i''m seeing this erros on dmesg: [drm:i830_wait_ring] *ERROR* space: 131056 wanted 131064 [drm:i830_wait_ring]

Hello, Not sure when it stopped working as I don't use it often. Maybe since the upgrade from 5.2 to 5.3. Can't say for sure as it's been a while since tried to start X. The errors I receive when startin X are: (EE) I810(0): unknown reason for exception (EE) I810(0): cannot continue (EE) I810(0): VBE initialization failed (EE) Screen(s) found but none have a usable configuration

At the moment I''m short of access to a widescreen Mac. I''m trying to find out what the pixel size of the viewport is on Safari when you have it maximised with tabbed browsing and the standard set of buttons, menus and toolbars in place. I''ve done the same exercise on Firefox and IE7 on Ubuntu Linux and Windows, and for a nominal 1280x800 widescreen display you get a

I have a dual boot CentOS 5.2 / FC4 machine, and recently I have bought a new widescreen tft monitor. I used to use a plain 4:3 crt, and after plugging the 16:9 tft naturally X needed reconfiguring. This was easy in FC4, and seemed as easy in CentOS, but with a wrong result. Basically, what I did was to run system-config-display to reconfigure for the new monitor and resolution. All goes

Greetings everybody! For about two weeks I'm now a happy owner of an intel-powered laptop (chipset, wifi, gfx) and wanted to give it a full test-drive of compiz and other GL-intensive programs. The laptop runs Xorg 7.1.1 and the i810 driver that comes with it (stock rpm from FC6). I'm forced to start compiz 0.3.4 with these options... --use-cow --strict-binding --indirect-rendering

Thanks to Ritesh Khadgaray: > Is there anything I'm missing? Some other configuration file or > record somewhere I need to tweak? with gconf-editor, check "/desktop/gnome/screen/default/0/resolution" . -- Ritesh Khadgaray ?Ph: +919970164885 ?Desktop LinuX N Stuff, RHCE Software Maintenance Engineer, Pune, Red Hat ? ??? ????? ??? That was it! mhr

http://bugs.freedesktop.org/show_bug.cgi?id=14703 Summary: On NV17 on laptop screen: certain resolutions are scrambled Product: xorg Version: git Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/nouveau AssignedTo: nouveau at

Hi All, I'm experiencing odd behaviour with various OpenGL apps I'm (trying to) use. I have an IBM Thinkpad X60s with the Intel GMA chipset, the 945GM to be precise. I have glxinfo/glxgears working normally, disabled composite in xorg.conf and everything seems fine. However, there are a few applications that I use that show rather strange behaviour that I think is related to the same

CentOS 4.4 Kernel Release 2.6.9-42.0.3.EL Monitor: ViewSonic VX1935WM Video Adapter: Intel 82945 G Express KDE 3.3 Greetings I am attempting to configure my ViewSonic VX1935WM widescreen monitor. Unfortunately this model is not listed in the Display Settings. I have attempted the generic 1440 x 900 LCD monitor listed. This does not provide the required resolution. I have edited

On Tue, Feb 25, 2020 at 10:59 AM Thomas Zimmermann <tzimmermann at suse.de> wrote: > > Non-KMS drivers store state in struct drm_driver. This bloats the > structure for KMS drivers and prevents it from being declared with > 'static const' qualifiers. Moving the non-KMS state into a separate > data structure resolves this. > > Signed-off-by: Thomas Zimmermann

A playback of a mono vorbis track on a system using the i810 audio driver via ogg123 results in a double speed playback (chipmunk sound). It seems that this chipset doesn't support mono and while xmms seems to compensate for it, ogg123 doesn't I have a bugzilla report at redhat.com filed on this with more details https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=90433 Regards, Yusuf

In my SuSE updates this morning, I found "Bug fixes for i810/Radeon graphics drivers"... -Tom -- Tom Eastep \ Nothing is foolproof to a sufficiently talented fool Shoreline, \ http://shorewall.net Washington USA \ teastep@shorewall.net PGP Public Key \ https://lists.shorewall.net/teastep.pgp.key