similar to: eth1 changed to __tmp78668633 in recent kernels

Hello, I'am using a LSI 1068e OEM version from Super Micro (see lspci). I was able to install a plain CentOS5 with the binary drivers I got from Super Micro. 06:00.0 SCSI storage controller: LSI Logic / Symbios Logic Unknown device 0059 (rev 04) Subsystem: Super Micro Computer Inc Unknown device a180 Flags: bus master, fast devsel, latency 0, IRQ 10 I/O ports at e000

I decided to try the x86_64 version of CentOS 5 on my new desktop since it has an Athlon 64 X2 CPU. The one really perplexing oddity is that the monitor no longer goes to power save mode (standby) if the system is idle long enough (e.g., overnight). The "power management" option is set to put the display to sleep after thirty minutes. The display gets blanked but it never goes to

Hallo Mailinglist:), i used xen 4.1 with xend xm a while. I compiled the unstable 4.2 today and most thinks run fine :). I have only one big problem, the network for my guestsystems. It don't want to work. Hopefully somebody can help me. In Xen 4.1 i only wrote the following line in my questconfig: vif = [ "bridge=eth0,script=vif-bridge" ] And everything works fine. This does not

Hi, The following 4 patches enable direct device assignment (PCI passthru) for HVM guest on AMD IOMMU platforms. Please apply them against C/S 16491 as the named order. To enable AMD IOMMU, please add "enable_amd_iommu" as xen boot parameter. 1-cleanup.patch: code cleanup, bug fix, minor enhancements to existing amd-iommu codes. 2-passthru-amd.patch: passthru support, modifications to

Hello, I have a PC Chips A31G board with AGPro slot and found that nouveau does not work properly with it. Console works but reverts to software mode, X11 hangs with mouse cursor only. The slot is physically AGP 1.5V but is wired to PCI bus as the chipset (SiS 761) does not support AGP cards. To further complicate things, the chipset has AGP capability - but only for the integrated video. You can

I saw autodesk inventor 2009 is working with wine, so I am trying to install inventor 2009 LT. but I have no luck. Installing it from the Setup.exe give an error, and trying to run the msi directly tells me that the installation needs to be run via Setup.exe. when running setup.exe here's what i get: ~/Programs/wine/wine Setup.exe err:iphlpapi:getNumWithOneHeader Unable to open

Hi all, First, i''m french and my english is approximately, thanks to be indulgent. I have 2 Xen server 4.0 on Debian Squeeze with this kernel : 2.6.32-5-xen-amd64. In my entreprise I have a multiple networks : - 1 : 10.168.30.0/24 - 2 : 10.168.40.0/22 - 3 : 10.168.50.0/22 - 4 : 10.168.60.0/22 - Admin : 10.168.0.0/20 - Internal : 172.16.8.0/24 On my 2 Xen server I have 6 bridges which

I have the following networking setup: - eth0 and eth1 corresponding to the physical ports on the host NIC - bond0 which enslaves eth0 + eth1 - br0 which attaches bond0 - xenbr0 - xenbr5 all of which are internal only networks (10.0.0.0; 10.1.1.0; etc) Br0 is used both for the host to access the outside world as well as DomUs acting as gateway machines for each xenbr network. For example the

Hi List, optimizing the configuration on one of our servers (which was hit by a brute force attack on dovecot) showed an odd behavior. Dovecot Version 1.0.7 (CentOS 5.2) The short story: On one of our servers an attacker did a brute force attack on dovecot (pop3). Since the attacker closed and reopened the connection after every user/password combination the logs showed many lines like

I currently have my /home directory kept in sync between my primary and backup domain controllers by using rsync --archive --checksum --update --delete pdc-srv:/home/ bdc-srv:/home/. I noticed that when this command is invoked, it tends to suck up the available bandwith to eth0 during the duration that the pdc is sending a large amount of data packets to the bdc. So what I would like to do

Hi List, optimizing the configuration on one of our servers (which was hit by a brute force attack on dovecot) showed an odd behavior. The short story: On one of our servers an attacker did a brute force attack on dovecot (pop3). Since the attacker closed and reopened the connection after every user/password combination the logs showed many lines like this: dovecot: pop3-login: Aborted

Hi, does somebody know, if there is any documentation available on how to set mac addresses on virtual bridges / virtual interfaces? Keeping track of every mac in the particular segments is really impractical. Thanks for any suggestions! -- Stephan Seitz Senior System Administrator *netz-haut* e.K. multimediale kommunikation zweierweg 22 97074 würzburg fon: +49 931 2876247 fax: +49 931

Hi I''m testing around with xen 3.0 snapshot from last week. And i''m now having a problem with a xenbr which is based on a vlan if (dot1q). this is all in dom0 os: debian testing network: tg3 I can start the bridge based on my normal physical eth0 which is working without any problems. My clan without bridge is also working. I can start the bridge based on a vlan if with help

Hi Group ... havin'' read whatever I could "google" on this topic, I didn`t find any solution: openSuSE 10.2 (out of the box), xenkernel, running on HP Proliant DL360G5 (dual internal networking, plus additional 4-port adapter) gives me eth0 - eth5, but only peth0 - peth3 (as well as vif0 - vif3 and consequentely xenbr0 - xenbr3). I increased the number of loopback-devices

Hello I am using linux box as a network loadbalance router. ----------------- ------------ |LAN| - |eth0 eth1(1.1.1.2) | DSL1 ------- |DSLAM (1.1.1.1) | | eth2(1.1.1.10) | DSL2 ------- |DSLAM (1.1.1.9) | ---------------- ------------ But I have a

On 21/02/06, Bráulio Gergull <gergull@getnet.com.br> wrote: > Hi, > > I''ve had a similar problem. I found it to be due to crc checksum errors. > > I solved that with "ethtool -K ethN tx off" on all domU''s. > > I found some related info on the following thread: > > http://lists.xensource.com/archives/html/xen-users/2006-01/msg00088.html

Hi all, i'm having an issue with my bridge. I have the following network: ADSL router (192.168.0.1) ------ [eth0] Bridge (192.168.0.2) [eth1] ------- Workstation (192.168.0.3) Bridge works, but after some minutes, my eth1 card (8139too driver) goes link down and link up, disabling access to the bridge IP for a while (bridge functionality for workstation works ok). This happens between

I have a Centos 3 server with three network interfaces. eth0 is for the local network and the firewall is the gateway, the ip and gateway are set statically. eth1 is a adsl connection using dhcp to allocate the ip. I want to make eth1 the default route. If it was statci I would just use a "route add default gwd eth1" command, but I can't do that with DHCP. How do I make eth1 the

when will eth0 and eth1 be supported in syslinux? -- ----------------------------------------------- Brandon Kruse

Greetings: I am working with Xen 3.03 and CentOS 5.5 on a physical machine and have configured Centos 5.5. in a virtual machine (Domain-1). In the real machine I have two network cards eth0 (IP: 10.10.10.1) and eth1 (IP: 192.168.1.1). The virtual machine (IP 192.168.1.2) should come (gateway) for the network card eth1. Currently does not. The virtual machine sees only the interface virbr0 How do