similar to: howto use kvm-amd on centos 5.1

> > On Wed, Jun 18, 2008 at 10:21 AM, Karanbir Singh <mail-lists at karan.org <http://lists.centos.org/mailman/listinfo/centos>> wrote: > >/ Jerry Geis wrote: > />>/ > />>/ What went wrong? > />/ > />/ Also, I can see you are still doing your old "ask on the list rather than > />/ actually work out what the problem is" trick :/

I "wish" to not load the or even install the nouveau driver by default. I want to use the NVIDIA binary driver. I have tried a number of things: 1) in my kickstart package section add the line: -xorg-x11-drv-nouveau This did not work - it was still installed. 2) use the nvidia installer and it asks to create a modprobe.conf file to blacklist the driver. I said yes thats what I want.

Gents, I can compile mplayer on centos 4.5 AMD 64 in native 64 bit mode and it plays the dvd, and also compile for 32 bit mode "gcc -m32" on it also plays the dvd. "mplayer dvd://1". I can compile mplayer on centos 5 AMD 64 in native 64 bit mode and it plays the dvd. However, when I compile in 32 bit on AMD 64 centos 5 I cannot play the dvd. I get: Playing dvd://1 File

hi all, I am trying to get lm_sensors to work. did the yum install lm_sensors service lm_sensors start sensor -s and it says no sensors found. did lsmod | grep it87 and it87 57061 0 hwmon_vid 35905 1 it87 hwmon 36553 1 it87 i2c_isa 39105 1 it87 i2c_core 56129 5 it87,i2c_isa,i2c_dev,i2c_ec,i2c_piix4 Seems like

On Fri, May 6, 2016 at 8:06 AM, Jerry Geis <geisj at pagestation.com> wrote: > | What is your graphics card model? > NVIDIA Corporation GK208 [GeForce GT 720] This does 4K > > | Which driver are you using? > I am using the NOUVEAU at this time > I would suggest trying the NVIDIA proprietary driver from the ELRepo rpm --import

I followed the instructions (I thought) for hfsplus on C7. Installed elrepo Then installed hfsplus hfsplus-tools and kmod-hfsplus kmod-hfs rpm -qa | grep hfs clearly shows the items kmod-hfsplus-0.0-2.el7.elrepo.x86_64 hfsplus-tools-540.1.linux3-4.el7.x86_64 kmod-hfs-0.0-2.el7.elrepo.x86_64 When I do my mount command mount -t hfsplus -o loop Mac.dmg /mnt/mac mount: unknown filesystem type

I am sending an email from my machine devcentos5x64. the transcript below (hangs for 60 seconds) at the line: MAIL From:<root at devcentos5x64.msgnet.com> SIZE=56 AUTH=root at devcentos5x64.msgnet.com The email succeeds - but I am trying to figure out the 60 second delay. Neither email server is busy. Nothing is waiting. the DNS on both machines point to the same nameserver. The DNS

I was wondering if (2) quad T1 cards will work nicely in 1 server with a quad core AMD 3.0 gig cpu? Basically used to dial out and deliver messages. play wav files for the message. Any thoughts. Jerry

I am running asterisk 1.4.18 trying to use MeetMe and option b. I am getting permissions denied failed to execute conf-background.agi on the CLI lrwxrwxrwx 1 root root 37 Mar 17 10:11 conf-background.agi -> /home/silentm/bin/conf-background.agi my conf background is a symbolic link - then my permissions are : [root at devcentos5x64 src]# ls -l /home/silentm/bin/conf-background.agi

To continue here with problems on this compaq v2000 laptop, I put kernel source on a USB disk and plugged it into the v2000. NOTHING IS recognized. I tried to manually mount the disk and nothing either... I thought USB was well established.... I thought trying to recompile the kernel for realtek support might get my networking going... I am stuck??? Jerry -------------- next part

I am getting the following link error on centos 5 AMD 64 for opengl. What do I not have installed? I ran ./configure --x-libraries=/usr/lib --libdir=/usr/lib only warnings I got was abour FontForge missing. make depend make THanks, jerry ----------- make[2]: Leaving directory `/home/silentm/wine-0.9.40/dlls/wtsapi32' make[2]: Entering directory

I installed C7 along with MATE desktop... My monitor is a 4K unit but when I goto the System -> preferences -> hardware -> Displays there is selection for the 4K display. It stops at 1920x1080. The var log x file shows the 4K resolutions in the file so that is good. How do I get the selections for 4K to show up? Thanks, Jerry

Hi all, I have installed centos 5.1 x86_64. 2.6.18-53.1.14.el5 Everything seems to be working fine except that the rtc module is not working. cat /proc/interrupts shows: CPU0 CPU1 0: 129 0 XT-PIC-XT timer 1: 330797 0 XT-PIC-XT i8042 2: 0 0 XT-PIC-XT cascade 3: 4 0

What does it take to get ztdummy to work correctly? I have a new laptop HP HDX9200. I am running asterisk 1.4.19 and zaptel 1.4.9.2 Zaptel compiles fine. asterisk compiles fine. ztdummy loads asterisk runs. Problem is playback() does not work. So then I stop zaptel, asterisk runs and playback() now works. However, meetme()'s dont work. I need ztdummy I'm pretty sure for that. I am

hi all, running centos 4.7 i686. I seem to have an o pen r elay sendmail server. How do I close it? I have the STRAIGHT centos install sendmail.mc file. Only thing I changed was: dnl DAEMON_OPTIONS(`Port=smtp,Addr=127.0.0.1, Name=MTA')dnl so as to allow incoming email and not just localhost. however this seems to relay everyone. I looked at http://www.sendmail.org/tips/relaying but it

I am trying to hwclock to set the time. (hwclock -w) this is what I get on standard 5.2 x86_64. hwclock --debug hwclock from util-linux-2.13-pre7 hwclock: Open of /dev/rtc failed, errno=19: No such device. No usable clock interface found. Cannot access the Hardware Clock via any known method. [root at devcentos5x64 src]# ls -l /dev/rtc crw------- 1 root root 10, 135 Feb 6 13:32 /dev/rtc Any

I am trying to plug a USB 2 device in a USB 3 slot. Nothing is being detected in "lsusb". Is there something special I need to do? I am running centos 5.5 x86_64. I thought 3.0 was backward compatible. Nothing special about my device its an RS232 to USB device. It works in 2.0 slot. Thanks, Jerry

Hi all, Hey I'm trying to do some web cam stuff, and I found this link: http://freshmeat.net/projects/libv4l/releases/333037 I was doing the "rpm -qa | grep v4l" and nothing comes up, I did "ls path_to_centos/RPMS/* | grep v4l " and nothing comes up, I did 'yum provides "*/libv4l*"' and nothing comes up. Is the CentOS library for v4l named something

What is needed to get DAHDI to start up correctly on CentOS 7 and systemd... I am using DAHDI-linux-complete 2.11.1 I saw mention in my search that it has been fixed after 2.11.1 but cannot find what the fix is. Thanks, Jerry -------------- next part -------------- An HTML attachment was scrubbed... URL:

I was just wondering if there are special tricks people do that compile A LOT on centos? Do RAM disks help or something else I dont about that minimizes your compile time? I presently have and AMD x2 4800+ with 2GIG ram. Just curious if I can reduce any more time out of my compiles. Jerry