similar to: Installing Centos 5 on HP DL140 G3

Hi, This appears to be related to a thread from January 2010: http://lists.alioth.debian.org/pipermail/nut-upsdev/2010-January/004470.html NB: This is on an HP-UX 11.31 box, using a self compiled and packaged version of NUT 2.6.3, and net-snmp v5.7.1. Therefore some of the search paths and things like that may well be wrong because I've done something dumb. I'm also only just getting

Dear All, Salam!!! Well i am using CentOS release 4.3 (Final). From the start i installed the CentOs plus kernal; CentOS (2.6.9-42.0.8.plus.c4smp) I was facing the problem, that is system poweroffs, as this was happening randomly, but always found this problem in the night or even early morning. Also i assure you that system and all applications work normally in the office timings as i use to

Hello, This afternoon I wanted to upgrade to 7.1 two good old dell PowerEdge servers which were running FreeBSD 6.x. It went fine and quickly on the poweredge 1950, but it failed completely on the poweredge 1850. Facts: - boot cd and setup / operation of freebsd 6.x or 7.0 is fine Message log abstract: $ uname -v FreeBSD 7.0-RELEASE-p7 #0: Sun Dec 21 08:31:52 UTC 2008

On Sat, Aug 10, 2013 at 11:14:39AM +0800, Timon Wang wrote: > I have tryied change the disk bus to SCSI, add a SCSI controller whose > model is virtio-scsi, still can't setup the RAC instance. > > I tried to use windows 2008 Failover Cluster feature to setup a a > Failover Cluster instead, and I can't find any cluster disk to share > between two nodes. So when Failover

On Mon, Aug 12, 2013 at 06:17:51PM +0800, Timon Wang wrote: > Yes, SCSI bus likes pass through a shared LUN to the vm, and I am > using a shared LUN for 'share' purpose. > > I found a post that vmware use lsilogic bus for the shared disk, but > my qemu/kvm version can't support lsilogic bus. > > I'm tring to update qemu/kvm version for lsilogic bus support.

Hello, While shopping for another 3Ware card, I found that this market has gotten much larger since I bought my 6500. So I started looking at the various cards while browsing the hardware notes for FreeBSD 4.8 and 5.1. So I'm wondering if anyone can provide some insight here. -3Ware has a whole new series of cards. The twe(4) manpage states that only 5xxx and 6xxx series cards are

Attached patch allows isolinux to boot from a CDROM attached to a NCR/Symbios/LSIlogic SCSI controller (bios version 4.19). It appears this bios can't read more than 1 sector at the time using the ah=42h int13 call. The isolinux boot was failing early on when 4 sector are read. (bios returned error 0 !) I'm not sure if the same 'getlinsec' routine is called upon later to load

H. Peter, I came across the first system where isolinux failed to load: ======================================================= Isolinux 1.63 2001-8-6 Copyright ... isolinux: Starting up, DL = F0 isolinux: Loaded spec packet OK, drive = F0 isolinux: Sector size appears to be 0800 isolinux: Loading main image from LBA, 0003F25D isolinux: Sectors to load = 0004

Nothing like a "heart in mouth moment" to shave tears from your life. I rebooted a snv_132 box in perfect heath, and it came back up with two FAULTED disks in the same vdisk group. Everything an hour on Google I found basically said "your data is gone". All 45Tb of it. A postmortem of fmadm showed a single disk failed with smart predictive failure. No indication why the

Just curious but how long has ESX support been in libvirt? Also I noticed this error when accessing one of my windows vms: error: internal error Expecting VMX entry 'scsi0.virtualDev' to be 'buslogic' or 'lsilogic' but found 'lsisas1068' Not sure whether this is an enhancement, defect, or not supported at this time. Thanks. -Jon

These 2 patches remove devices which can prevent a guest from starting after conversion if they aren't supported by the target. This solution isn't ideal. We would preferrably query the target for supported models and update if necessary, however there's no API for this yet. Matthew Booth (2): Remove converted SCSI controllers Remove sound cards when outputting to libvirt

Hi, I have a LSI Logic sata/sas raid running, is there a way to see the state of the volume, like optimal, degraded or resyncing? I've tried several commands with camcontrol but I cant figure it out. -- Peter Ankerst?l peter@pean.org http://www.pean.org/

Hi, according to http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/dev/amr/amr.c?only_with_tag=RELENG_6 it seems MegaMGR for linux now can work. Any experience? -- Cris, member of G.U.F.I Italian FreeBSD User Group http://www.gufi.org/

Dual Opteron system running ext3 atop drbd (network RAID) devices, which, in turn, are atop LVM logical volumes. The underlying device is hardware SCSI RAID via a LSILogic HBA. The kernel is vanilla 2.6.13 on a Gentoo-based system. A panic occurred, which contains references to ext3 code. I'm not sure how others manage to get these typed out, but I'm manually typing it from

Hello, We're getting around to upgrading our mail server and here are the quick specs: MegaRAID SCSI 320-2X http://www.lsilogic.com/products/megaraid/scsi_320_2x.html TYAN Transport TA26 B2882T26U8H 2U Barebone Server-Rackmount - Retail http://www.newegg.com/Product/Product.asp?item=N82E16856152007 plus RAM, CPU and 4 SCSI drives setup in a RAID-5 Is that MegaRAID controller supported in

Many people seem to wait for the announcement of CentOS 6.0, so I want to share some test results I did with SL 6.0.. The actual 6.0 kernel can NOT allocate tape buffers when the server is heavily loaded at least on some LSILogic hardware. There is a big problem of slab buffer increase that can cause reboot/freeze of the server under load. Reported by many and verified by me :-( So perhaps

Dear Sirs. It seems to me a never ending story. We run a box with a TYAN Thunder 2500 Dual SMP mainboard, 2GB ECC Tyan certified memory, AMI Enterprise 1600 RAID adapter and additional Intel 1000/Pro server type (64 bit) GBit LAN NIC. With FreeBSD 4.8 this was stable, but to achive this state was really hard! It is a story similar to that what happend when we changed towards FreeBSD

Hi, Dear Mr/Mrs. I have two questions ask for help: my virt-manager and libvirt version is : linux-vaan:~ # rpm -q libvirt libvirt-0.8.5-1.2.i586 linux-vaan:~ # uname -a Linux linux-vaan 2.6.34-12-desktop #1 SMP PREEMPT 2010-06-29 02:39:08 +0200 i686 i386 GNU/Linux linux-vaan:~ # rpm -q virt-manager virt-manager-0.8.5-3.1.i586 linux-vaan:~ # cat /etc/SuSE-release openSUSE 11.3 (i586) VERSION =

Hi all, I tried to install centos 4.5 i386 as a guest on an AMD x2 machine today. It told me it did not find any install media. I had created an 8G disk for it. Is there a SCSI driver I need to "Add" when prompted? I have never used SCSI and dont know which SCSI controller vmware is emulating. What driver do I need to load? I was then surprised some time later when my machine locked

I tried using it in a template: <%= memory %> and it put "0" in my file when i switched the variable name to the_memory, it worked Eugene Ventimiglia Director of Systems GridApp Systems e: eventi@gridapp.com o: 646 452 4081 _______________________________________________ Puppet-users mailing list Puppet-users@madstop.com