similar to: PRIO qdisc + iptables TOS target

On 2/19/07, Salatiel Filho <salatiel.filho@gmail.com> wrote: > Well , thanks to imq all my client machines are now shaped and > everything is great ... > But now i have a doubt , is there a way to shape the traffic that goes > to the route [doing a wget from the router for example ]? > > > I have a PREROUTING IMQ0 and a POSTROUTING IMQ1 , everything is > working like

Hi guys, i have a little doubt ; I have eth0 ethernet and eth1 wireless , and they are bridged in br0 Is there any difference in the behavior between do tc qdisc add dev br0 root sfq OR tc qdisc add dev eth0 root sfq && tc qdisc add dev eth1 root sfq -- []''s Salatiel "O maior prazer do inteligente é bancar o idiota diante de um idiota que banca o

Hi guys , i am starting to "play" with qos in linux. Well , i am trying to setup an ingress filter but i do not know why it is not working. tc add qdisc dev eth0 ingress tc filter add dev eth0 parent ffff: protocol ip prio 1 handle 1 fw police rate 160kbit burst 256kbit drop flowid :1 After that : iptables -A PREROUTING -t mangle --sport 80 -j MARK --set-mark 1 So , i think this

After starting to shape local traffic now i am getting a lot of kernel panics in tcp_retransmit, so i decided to update my kernel from 2.6.17.14 to 2.6.21.1 , the problem is that after that i get: # iptables -t mangle -A POSTROUTING -o eth0 -j IMQ --todev 0 iptables: No chain/target/match by that name so i can not redirect ttraffic to IMQ device. and modules are loaded. - # lsmod Module

Hi folks...!!! I need to generate qdisc statistics to show my 4 class (10, 20, 30, 40), i`ve all working with HTB and so on, but i need to graph this results e.gwith RRDTOOL. I found a script made in perl, that can to graph my 4 class, but i need to know which IP address on my LAN are using the bandwidth too, in other hand i need to classify the traffic by IP to show. This is an out of my

Hi, i am trying to migrate my print servers from windows to linux , everything is getting really nice but i still face a few problems , and since i don't know if i need help from cups or samba guys i will post to both lists, so maybe someone can give me some help. Well, i have now cups and samba working just fine, i can authenticate my users in cups from Active Directory using winbind and

How can i redirect all traffic that not come from port 80 to a flow ? i was thing about some like tc filter add dev imq1 parent 1: protocol ip prio 7 u32 match ip sport !80 ...... But this not work. Another doubt, if i have two rules that intersects , for example , one filter with u32 match ip src 10.10.10.10 flowid 1:10 and other with u32 match sport 80 0xffff flowid 1:11 , which one will

Hi All , My first message and I have a little problem with my FC6 box trying to block emule traffic using layer7 . Here my network : Internet --------- ADSL Router ------------------- FC6 Box -------------------- Emule Box external ADSL : Dynamic Internal ADSL : 192.168.254.1 external FC6 : 192.168.254.3 internal FC6 : 192.168.253.1 Emule Box : 192.168.253.3 I guess that everything

I have this: class htb 1:29 parent 1:1 prio 0 rate 3000bit ceil 100000bit burst 1599b cburst 1611b Sent 33233 bytes 772 pkts (dropped 0, overlimits 0) lended: 415 borrowed: 357 giants: 0 tokens: -3756376 ctokens: 128779 or this: class htb 1:21 parent 1:1 prio 0 rate 3000bit ceil 100000bit burst 1599b cburst 1611b Sent 57554 bytes 618 pkts (dropped 0, overlimits 0) lended: 193 borrowed: 425

Hello I''m looking for a more efficient way to limit rates to different clients. Right now as I understand it, I have to make a class for every customer/ip-address I''d like to limit bandwidth. This means lots of configuration if i had many customers to setup traffic shaping for. I can filter for ip-ranges, but then all ip''s of that range share the set bandwidth of the

Hi , i am trying to understand how RED queue discipline works but i am having a few troubles. The parameters are MIN , MAX , LIMIT , BURST I put LIMIT = 64Kb, so if i am not wrong it should PDROP anything over this value , right ? i put MIN = 8Kb , so no drops at all below this value, right ? i put MAX = 16Kb, starts to early drop anything above this using probability P. I put probability at

Hi, i am running imq + htb on my router , the situation is like this eth0 = uplink to my provider eth1 = 1st customer eth2 = 2nd customer eth3 = 3th customer eth0 has limit 512 and i want to share this between eth1 eth2 and eth3 , but not working , this is the script i used, \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ #!/bin/sh

In esfq README i have: Depth sets the number of slots. If the number of active flows is greater than the number of slots, flows will end up sharing slots and ESFQ will no longer be fair. If you anticipate more than 128 concurrently active flows, you should use a larger depth and probably a larger divisor (see below). If you expect there to be far fewer than 128 concurrent flows, you

Hi all, my IMQ device works OK (thanks to Andy Furniss), but now I''ve problems to attach the traffic in the qdisc''s. This is my conf: ----------------------------------------------------------------------- INET | |eth0 300Kbps ROUTER (NAT) |eth1 | LAN ----------------------------------------------------------------------- MAX=300 tc qdisc add dev imq0 root handle 1: htb

Hi folks, I`ve a problem to use HTB and SFQ. The first script, below, to show a simple configuration, does work fine...!!! But, in the second example, does not work, becouse i put more code to clasify the traffic by protocol, http and ftp in this case. Somebody can tell me the errors? Thx, in advance.- NOTICE: IMQ device is to asociate with ETH1 my external iface. SCRIPT que funciona:

Hi All, I''m trying to create a contended section of bandwidth using IMQ. I have the imq0 device up and running, with traffic passing through it. Firstly, I need to throttle the entire device imq0 to 2mbit/s. I would then like to add throttle rules for individual IP addresses, allowing them to pass up to 512kbit/s each, as long as imq0 has not reached its 2mbit/s. The configuration

Hi I try setup imq pseudo device for shaping I''m work such script #!/bin/sh TC=/sbin/tc /sbin/modprobe imq numdevs=1 /sbin/ip link set imq0 up $TC qdisc add dev imq0 handle 1: root htb default 1 $TC class add dev imq0 parent 1: classid 1:1 htb rate 10mbit # client1 tunnel tunnel $TC class add dev imq0 parent 1: classid 1:2 htb rate 256kbit $TC filter add dev imq0 protocol ip parent 1:0

Hello, I''ve just recently started to use IMQ and I got puzzled after seeing the imq usage example on the linuximq.net site: It was something like this: tc qdisc add dev imq0 handle 1: root htb default 1 tc class add dev imq0 parent 1: classid 1:1 htb rate 1mbit tc qdisc add dev imq0 parent 1:1 handle 10: htb default 5 tc class add dev imq0 parent 10: classid 10:1 htb rate 256kbit

hi stef oone more pb while shaping incoming traffic with imq .this one tc qdisc add dev imq0 root handle 1: htb default 20 tc class add dev imq0 parent 1: classid 1:1 htb rate 2mbit burst 15k tc class add dev imq0 parent 1:1 classid 1:10 htb rate 1mbit tc class add dev imq0 parent 1:1 classid 1:20 htb rate 1mbit tc qdisc add dev imq0 parent 1:10 handle 10: pfifo tc qdisc add dev imq0 parent