similar to: [pakrat@private.neotoma.org: xen-hypervisor-3.0-i386: cannot start NetBSD-HEAD]

Package: xen-hypervisor-3.0-i386 Version: 3.0.2+hg9681-1 Severity: important Have been trying to get NetBSD to run under debian unstable with the debian supplied hypervisor. Using the 3.0.2-2 hypervisor supplied by XenSource, it works just fine. Because the install process overrides other things, reverified with debian hypervisor afterwards and symptom continues. Attaching the netbsd.cfg and the

I just tried to setup another domain on a server running 1 domain. When i try to start the domain it gives me an error Error: Device 0 (vif) could not be connected. Backend device not found. The entry in my xen config file for the disks is disk = [''phy:/dev/xen001/xen2-fun,sda1,w'',''phy:/dev/xen001/xen2-fun-swap,sda2,w''] Looking at /var/log/xend.log, i found

Hi, I have Xen (unstable) on two Debian Sarge 2.4.27 systems, one of which is an nfs server and the other the nfs client. I am trying to set up NFS root so that I can live migrate my domains from one to another. My /etc/exports on N1(10.5.144.29) /myfs1/foo 10.5.144.27(rw,sync,no_root_squash) 10.5.144.29(rw,sync,no_root_squash) 10.5.144.30(rw,sync,no_root_squash) My /hosts.allow on N1

Package: xen-hypervisor-3.0.3-1-i386-pae Version: 3.0.3-0-2 Severity: normal If quagga is running, and I start & stop a domain, the VIF interface doesn't go down properly (in addition to other problems). Here's what I do: 1. Boot the computer. By default, quagga is running (zebra + ospfd). 2. xm create test7.cfg, wait until the domU starts. 3. xm shutdown test7, wait until the domU

hi, I am trying to start a new domainU but got the error: Error: Device 0 (vif) could not be connected. Hotplug scripts not working I have struggled with it for a long time. I found somebody else report this but can not find a solution. The xen version is xen-3.0 latest version. I do not have a initrd. Domain0 works fine but when I create a new domain, it always gives an error as above. Thanks,

I am having the same problem, however on RHEL 2.6.16. I have tried setting up the bridge manually but it does not work. Can someone give some clues on what we should do to solve this problem in RHEL Thanks P. Krishna -------------- Original message -------------- From: Jens Nachtigall <nachtigall@web.de> > I found this at http://julien.danjou.info/xen.html > > Set up the

Hi. I''ve just upgrade my xen 3.0.1 to xen unstable. I noticed that there is no vmx driver here, only hvm. Actually I cannot start my VT domain: root@akira:/etc/xen# xm create bluszcz.hvm Using config file "bluszcz.hvm". Error: Device 768 (vbd) could not be connected. Backend device not found. root@akira:/etc/xen# my config: import os, re arch = os.uname()[4] if

After a yum update my two guests that had been shutdown do not start any more. I have two other guests running that seem to work okay but I am now afraid that they won't come up again if I restart them. I am running CentOS5 with kernel 2.6.18-8.1.8.el5xen. Previously I had following xen versions installed: Oct 14 23:45:10 Updated: xen-libs.i386 3.0.3-25.0.4.el5 Oct 14 23:46:05 Updated:

Hi all, I have recently installed FC5 along with xen via yum. I''ve successfully rebooted using the dom0 (2.6.16-1.2133_FC5) kernel, started xend, and trying to start my first domU after following the instructions in the user guide. However, I keep receiving a kernel panic and an error about XENBUS timeout. Any help greatly appreciated as I am stumped. Should I be using the provided

I have been playing with Xen 3.0.1 for some days now, using debian sarge for dom0 and domU''s, and it works like a charm. But, I have a problem with rebooting domU''s. Here is the output from /var/log/xend.log [2006-03-30 13:44:58 xend.XendDomainInfo] INFO (XendDomainInfo:823) Domain has shutdown: name=vmintraweb1 id=5 reason=reboot . [2006-03-30 13:44:58 xend.XendDomainInfo]

Hi, every one: I had problem creating domU on diskless device by using xen-unstable. Following, please find out details. BTW, the same configuration works fine on device with hard disk (1) Xen, dom0 kernel and dom0 root file system are loaded/mounted over via eth0 (2) DomU root file system is created in a file-backed virtual block device(VBD). The file-backed VBD locates at some directory on

I am running Pentium D 930 with 2 gigs of ram. Fedora Core 6 with Xen enabled. I am able to start the install and it goes to the first stage of needing to be rebooted. I restart the Domain and it starts to finalize the windows install. And is fine until it starts asking for serial numbers or computer names. Then all of a sudden the guest freezes. The guest CPU goes to zero and so does the

Hi guys, actually i use the following packages from etch-backports: =========================== ii linux-headers-2.6.18-6-xen-vserver 2.6.18.dfsg.1-18etch1 Common header files for Linux 2.6.18 ii linux-headers-2.6.18-6-xen-vserver-amd64 2.6.18.dfsg.1-18etch1 Header files for Linux 2.6.18 on AMD64 ii linux-image-2.6.18-6-xen-vserver-amd64

Hi. I am trying get use xen vmx, it shows only black window. I attach my config and logs. config: import os, re arch = os.uname()[4] if re.search(''64'', arch): else: kernel = "/usr/lib/xen/boot/vmxloader" builder=''vmx'' memory = 128 name = "bluszcz" vif = [ ''type=ioemu, bridge=xenbr0'' ] disk = [

Hi all, I''m having some problem migrating a simple domU between two hosts. Short question: xm migrate (live or not) fails even though either host is capable of running the VM. Error seems to be: "not a valid guest state file: pfn count read" Long question: I have two boxes (devvmdevvmhost1 and devvmhost2) running xen 3.0.3 (RHEL 5), they are attached to a Dell MD3000 unit

I am running Xen 4.0.1 with a 2.6.18-194.32.1.el5xen CentOS Dom0. I built and installed the Xen binaries from source. The systems boot successfully however I am having issues bring up DomUs. Here is config: name = ''xyz'' memory = 256 vcpus = 1 pae = 1 vnc = 1 vncunused = 1 disk = [ ''phy:/dev/vg1/xyz,hda,w'' ] vif = [

I was trying to install a guest OS with the following command. $ virt-install -r 1024 --accelerate -n ubuntu-first-test -f /var/lib/libvirt/images/guest.img --cdrom /root/ubuntu-12.04-desktop-i386.iso --hvm and it says the following. Starting install... ERROR POST operation failed: xend_post: error from xen daemon: <Fault 3: ''ubuntu-first-test''> Domain installation

Hi all, I had met with a question about vhd format when i install xen 4.2.0 source code on suse11_x86_64_sp2. execute steps: 1)Install fully suse 11 sp2 to host pc 2)Boot from Xen kernel menu 3)Download xen 4.2.0 source code from http://xen.org/download/index_4.2.0.html 4)Download bin86-0.16.19.tar.gz cmake-2.8.9.tar.gz Dev86src-0.16.19.tar.gz gettext-0.18.1.1.tar.gz

Hello, I have 2 Dell 1955 blade servers, running RHEL5-Xen. I''m testing the migrate functionality from one blade to another. I can start the domain, move it to one blade (minor delay/packet loss) and everything is fine. When I try to move it back to the original blade the migration fails and the DomU crashes c1b1 = Blade 1 (192.168.131.201) c1b2 = Blade 2

I have loaded FC6 with the virtualizations kernel, and I am attempting to load WinXP. I searched all the logs and docs and configured what I think is correct based on these. When I do an xm create dfw11286lv1.hvm, I get the following messages: Using config file "dfw11286lv1.hvm". Started domain dfw1128glv1 However, I never get a window with the installer. Also, when I open the