similar to: Threads

Dear Arnaud, Now I started to write a driver that simulates continous power breaks. (E.g. in every 30 minutes.) This could be used for testing of setup of client upsmons. I have to simulate a behaviour of a real UPS. The physical model contains an extra attribute: the charging current that needed to compute recharge time and actual battery charge during the recharge process. Can we call this

Dear Arnaud, Now I started to write a driver that simulates continous power breaks. (E.g. in every 30 minutes.) This could be used for testing of setup of client upsmons. I have to simulate a behaviour of a real UPS. The physical model contains an extra attribute: the charging current that needed to compute recharge time and actual battery charge during the recharge process. Can we call this

What is the sign of battery.current value? I wonder if the negative number means charging or discharging. Gabor

Dear folks, The patch in attachment allows upssched to put actual UPS name into command line even if configuration contains wildcard (*). E.g. AT LOWBATT * EXECUTE "LOWBATT %s" AT ONLINE ups3 EXECUTE "ONLINE %s" where %s is replaced with UPS name before logging and execution. A possible further enhancement could be if regular expressions are also acceptable in place of

I wonder if ups.status: OB LB OFF is valid? Or OB and OFF are mutually exclusive flags? Regards Gabor

Dear folks, strace shows that snmp-ups driver writes to stderr: [pid 21825] write(2, "No log handling enabled - turnin"..., 52) = 52 | 00000 4e 6f 20 6c 6f 67 20 68 61 6e 64 6c 69 6e 67 20 No log h andling | | 00010 65 6e 61 62 6c 65 64 20 2d 20 74 75 72 6e 69 6e enabled - turnin | | 00020 67 20 6f 6e 20 73 74 64 65 72 72 20 6c 6f 67 67 g on std err logg | | 00030 69 6e

Dear folks, According to mge-mib.c (NUT 2.6.2) LB condition is gained from variable .1.3.6.1.4.1.705.1.5.14.0 (i.e. upsmgBatteryLowBattery.0). The test device of me does not set this variable to yes(1) even if runtime drops below the preconfigured limit. I complained about this at Schneider Electric. They replied that low battery status is indicated by .1.3.6.1.4.1.705.1.5.14.0

Hi Arnaud, I played a bit with dummy driver in repeater mode. It is the concept what I need. Unfortunately I found that if connection to another upsd gets broken the driver does not try to repair it. Gabor

Dear folks, I had to rewrite UPS::Nut because it was not developed since 2002 and it was based a very old version of upsd speaking a totally outdated protocol. If some of you interested in it you can get from my debian repository. package name is libups-nut-perl. Add this to your APT sources: deb http://debian6.ki.iif.hu/ lenny contrib deb-src http://debian6.ki.iif.hu/ lenny contrib Or simply

https://bugzilla.netfilter.org/show_bug.cgi?id=1220 Bug ID: 1220 Summary: Reverse path filtering using "fib" needs better documentation Product: nftables Version: unspecified Hardware: All OS: All Status: NEW Severity: minor Priority: P5 Component: nft

reassign 609649 logcheck-database thanks Hi On Wed, Jan 12, 2011 at 05:40:35PM +0100, Kiss Gabor (Bitman) wrote: > > Thanks for the suggestion, but are you sure that this is actually > > part of cron-apt? I can not find any logcheck rules in the cron-apt > > sources. > > Ooops! You are right, I missed the addressee. :-) > File /etc/logcheck/ignore.d.server/cron-apt

I've set up my Samba PDC to act as a WINS server, because I need remote access to it (through a VPN connection). I put "wins support = Yes" into the smb.conf file. As far as I know, WINS doesn't use a unique port number, so enabling the usual NetBIOS ports (137/udp, 138/udp, 139/tcp) on the firewall should be enough to make WINS work. I did this already. I tried to connect to a

Hi all, I''m trying to set up a computer with 2 routes to the internet, much as described at http://lartc.org/howto/lartc.rpdb.multiple-links.html .One of my interfaces (eth5, 192.168.2.2) is only used for traffic originating inside the network. The other (eth1, 192.168.1.2) is only used for a VPN, where all (udp) traffic originates from outside our network. I have created a second

ok i will do it in text: 66.92.114.46 eth0 209.141.2.194 eth1 192.168.119.101 eth2 192.168.120.101 eth3 What i have is a linux box RH7.3 which will eventually run Shorewall Firewall. On this box there is eth0 66.92.114.46 conneted to isp1 and eth1 209.141.2.194 connected to isp2 It also has eth2 192.168.119.101 and eth3 192.168.120.101 which will connect to a failover appliance which has 2 wan

https://bugzilla.mindrot.org/show_bug.cgi?id=1757 Summary: strdelim has a bug caused only one user with quote Product: Portable OpenSSH Version: 5.4p1 Platform: Other OS/Version: Linux Status: NEW Severity: normal Priority: P2 Component: Miscellaneous AssignedTo: unassigned-bugs at mindrot.org

I have a computer with two interfaces, say with addresses 192.168.1.1 and 192.168.1.2. I want to set up routing such that when I ping 192.168.1.1 it goes out through 192.168.1.2 and not to the local interface. Is this possible - all my attempts so far have been unsuccessful? If so, pointers, etc. would be gratefully appreciated. Jim -- Jim Redman (505) 662 5156 x85

Using R 2.7.0 under WinXP. I need to write a function that takes a non-negative vector and returns the parallell maximum between a percentage of this argument and a fixed value. Both the percentages and the fixed values depend on which interval x falls in. Intervals are as follows: >From | To | % of x | Minimum

Hi, Please suppose following config: Two external interfaces for two different providers On each of them configured NAT for specific IP addr. ie. 4: eth2: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc htb qlen 100 inet 1.1.1.30/30 brd 1.1.1.31 scope global eth2 6: eth4: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc htb qlen 100 inet 2.2.2.66/27 brd 2.2.2.95 scope global eth4 On eth2

Hi, my box is connected to 3 networks, eth0 eth1 wlan0. I want "my" traffic to go via wlan0 and everything from eth1 NATed to eth0: eth0 192.168.1.10/24 eth1 172.16.1.1/12 wlan0 192.168.10.190/24 I first tried this with two single hosts: iptables -A POSTROUTING -j MASQUERADE -o eth0 -t nat iptables -A POSTROUTING -j MASQUERADE -o wlan0 -t nat echo 200 Forw >>

Dear all, I have problems with iif function using sqldf library. I counted abundance (Num) of different "SPECIES" in two moments (esf) saving the information in two Tables (esf50, esf100): esf50 SAMPLE SPECIES Num esf 1289 diso1 44 50 1289 diso2 5 50 1289 diso3