similar to: usbhid-ups fails with Belkin F6C120-UNV in nut-2.4.3

I have a 64 bit Gentoo, with a Liebert UPS. The last NUT working version was sys-power/nut-2.4.1-r1 (I also tried sys-power/nut-2.4.3-r2 but downgraded, don't remember the reason). Anyway with the upgrade to sys-power/nut-2.6.0 I started to see this error message when I try to start upsdrv: [root at aemaeth:/etc/nut]$ /etc/init.d/upsdrv start * Starting UPS drivers ... Network UPS Tools -

Hi Peter, I got all your patches and applied them, and I wanted to say kudos for a great job done. This is the output of upsc that I'm getting right now. I had the same issue when using any cvs version (from two weeks ago) that made my UPS go into a state where it wasn't functioning normally (checking the kernel log shows that it cannot be connected and I had around a page of DEVFS_USB

I just moved my UPS over from serial to USB and found that I needed to add it to the hotplug USB list to make things work. Belkin F6C120-UNV - Bus 002 Device 004: ID 050d:0912 Belkin Components It seems to be working OK on 2.0.4 with newhidups. Attached is a patch which I think should add the appropriate device id's in the right places to the trunk code. Jon -------------- next part

Peter, Looking through the usbhid-ups subdrivers, I came across the following function in apc-hid.c, presumably added by you about two years ago (if not, my apologies): 41 /* returns statically allocated string - must not use it again before 42 done with result! */ 43 static char *watts_to_av_conversion_fun(long value) { 44 static char buf[20]; 45 46 snprintf(buf,

Hello All- First, my apologies if this is not the correct place/procedure for reporting a bug. I have a Cyberpower 850AVRLCD ups, and I'm running NUT 2.6.0 (and also tried 2.4.1 and 2.4.3). I suspect that the problem I was having would affect anyone using the usbhid-ups driver, but since I have only the one UPS, I don't know for sure. In NUT 2.4.1 the driver starts up OK, and upsc

Hello All- First, my apologies if this is not the correct place/procedure for reporting a bug. I have a Cyberpower 850AVRLCD ups, and I'm running NUT 2.6.0 (and also tried 2.4.1 and 2.4.3). I suspect that the problem I was having would affect anyone using the usbhid-ups driver, but since I have only the one UPS, I don't know for sure. In NUT 2.4.1 the driver starts up OK, and upsc

Hi Charles, Sorry for the long email, I feel this deserves a fuller explanation. On Wed, Feb 14, 2018 at 10:30:18PM -0500, Charles Lepple wrote: > On Feb 3, 2018, at 7:19 PM, Russell King wrote: > > > > Input and Output reports are used for interrupt endpoints rather than > > control endpoints. HIDGetItemData() only ever requests feature > > report IDs, and

Just a little tiny detail : ============================================================================== > --- trunk/scripts/hotplug/libhid.usermap (original) > +++ trunk/scripts/hotplug/libhid.usermap Fri Aug 25 19:18:19 2006 > @@ -21,5 +21,7 @@ > libhidups 0x0003 0x09ae 0x1003 0x0000 0x0000 0x00 0x00 0x00 0x00

Oh oops, I see you already did. -- Peter selinger wrote: > > You could send it without "submitting" it. That's the advantage of > patches - they can be discussed. There are lots of eyeballs here that > might see what's wrong. Thanks, -- Peter > > Eric S. Raymond wrote: > > > > Peter Selinger <selinger at mathstat.dal.ca>: > > > I

This model is available in AU/NZ and can work as USB or serial. It uses the cutdown Bulldog software that comes with the cheaper serial based belkin models, and they don't officially support the USB mode under Linux. Anyone managed to get this working with NUT using either serial or USB? I'd really like to get the extra functionality of the NUT tools vs the very simple setup of the

I recently installed NUT 2.2.1 and set it up with a Belkin F6C100-UNV. I can monitor it via serial (belkinunv) or USB (usbhid-ups) cable, and both do seem to work fine, but I would prefer USB to avoid having to add a PCI serial card to the machine. I had to unplug something else to try it with a serial cable. Using 'belkinunv', there's a "-x wait" option: [ from

Hi all, My name is Sergio Penen and I'd like to contribute to the project by developing a new driver for TS SHARA SOHO II usb ups. I'm almost done decoding the protocol and already have some basic functionality working with NUT. However I've some doubts on how to integrate this driver with NUT and I wonder if you could give me some guidance in that sense. To be more specific: In order

I have a new Belkin F6C900-UNV. I see that it's not listed in belkin-hid.c The VendorID is 0x050d like all the Belkin UPSes, and the ProductID is 0x0900. I haven't had a chance to actually test the development version of nut yet, since I'm running Fedora Core 6, which still has nut 2.0.3. `newhidups -DD -a myups` gives the error of: Checking device (050D/0900) (001/002) - VendorID:

All, I just bought a Belkin F6C1100-UNV and am trying to get it to work with NUT. I have tried many drivers ( "belkin", "belkinunv", "genericups upstype=4", and "genericups upstype=7", "bestups", "fentonups"). None of them seem to work. Does anyone have any experience with this device? If there is some utility that you all use to

Hi, I've been fighting with trying to get a Belkin Universal model F6C800-UNV to work with NUT. The error I am getting is as follows: ---------------------------------------------- * Starting UPS drivers ... Network UPS Tools - UPS driver controller 2.0.0 Network UPS Tools - Belkin 'Universal UPS' driver 0.06 (2.0.0) tcgetattr(/dev/ups): Inappropriate ioctl for device Driver failed

Hi everyone, I have a belkin ups that was bought around 2 months ago. It seems like the driver doesn't like the UPS, although on the website it's listed as supported. This is on a gentoo system with nut 2.2.1 . megatec_usb output: ---------SNIP---------- digamma nut # ./megatec_usb -a belkinm -DDDDDD Network UPS Tools 2.2.1 - Megatec protocol driver 1.5.9 [megatec_usb] Carlos Rodrigues

Hello, all, I had been using NUT's Ubuntu package (64 bit) with no problems until upgrading to Ubuntu 11.04. Now, I get the following message when I try usbhid-ups: $ sudo /lib/nut/usbhid-ups -a mybelkin Network UPS Tools - Generic HID driver 0.35 (2.6.0) USB communication driver 0.31 Can't claim USB device [050d:1100]: could not detach kernel driver from interface 0: Operation not

Greetings! Thanks to all the developers who have made this project so far. Searching for a Linux based Belkin UPS monitor led me straight to the Network UPS Tools. I have bought a Belkin F6C900-UNV (900VA) for use on a Slackware 10.2 server to replace an older APC model that died suddenly. So far I have successfully managed to get NUT 2.0.5 compiled and configured and found that this Belkin

Hi Arjen My apologies fro drifting off topic in the other mailing list...:-) On the bottom of the Belkin UPS unit - is the model number: F6C120auUNV The "au" is for Australia I think. "man belkinunv" states that F6C120-UNV is supported - and I assumed that the "au" would not prevent this. I plugged in the USB to gather the information you requested. My intention

Mr. Selinger, I'm CCing you directly since it appears (insofar as I can tell) that you are one of the delelopers for the newhidups driver. This is the third time I've submitted this (hence the CC this time). Hopefully mailman takes it. I've tweaked my SPF records, and I'm hoping that was the problem. My sincere apologies if this has gone through and I just haven't seen it