similar to: building on Solaris 10 (was Re: 2.4.2 freeze)

If nobody objects within 24 hours, I will tag and release 2.4.2-pre1. cheers, Arnaud

make fails at drivers: make[1]: Entering directory `/export/home/zoly/Documents/trunk/drivers' /bin/sh ../libtool --tag=CC --mode=link gcc -I../include -DDBUS_API_SUBJECT_TO_CHANGE -I/usr/include/hal -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -I/usr/sfw/include -g -Dsolaris2 -I. -I/usr/sfw/include -O -Wall -Wsign-compare -o al175 al175.o ../common/libcommon.a ../common/upsconf.o

(Note that I mentioned this *was* previously working with an older version of Nut). [irs2-ups1] driver = snmp-ups port = irs2-ups1.sum.naoj.org mibs = auto community = private irs2-ups1.sum.naoj.org responds to pings. On Tue, Oct 8, 2013 at 3:55 PM, Tim Rice <tim at multitalents.net> wrote: > On Tue, 8 Oct 2013, Philip Tait wrote: > > > Here is the upsc

Here is the upsc output: # /usr/local/ups/bin/snmp-ups -DD -a irs2-ups1 Network UPS Tools - Generic SNMP UPS driver 0.68 (2.6.5) 0.000000 debug level is '2' 0.000327 SNMP UPS driver : entering upsdrv_initups() 0.000341 SNMP UPS driver : entering nut_snmp_init(snmp-ups) 0.056112 SNMP UPS driver : entering load_mib2nut(auto) 0.056126 trying the new

Hi, I've been using dovecot quite a while but latest beta fails to compile on Solaris using latest Sun Studio compiler. Making all in fts-squat source='fts-backend-squat.c' object='fts-backend-squat.lo' libtool=yes \ DEPDIR=.deps depmode=none /bin/bash ../../../depcomp \ /bin/bash ../../../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I../../..

On Tue, 8 Oct 2013, Philip Tait wrote: > Here is the upsc output: > > # /usr/local/ups/bin/snmp-ups -DD -a irs2-ups1 > Network UPS Tools - Generic SNMP UPS driver 0.68 (2.6.5) > 0.000000 debug level is '2' > 0.000327 SNMP UPS driver : entering upsdrv_initups() [snip] > 4.457750 No supported device detected I'm using a APC smart ups with a

Sorry for the partial post a moment ago With help I got two phones communicating - PCMA/PCMU was the problem. Next stpe is to try voicemail. VM works fine, I can leave a mesage and then retrieve it - but no MWI on the phone and no stutter dialtone. I promise I've spent the requisite 4 hours + on google etc. but have really no further ideas. The setup is 2 Grandstream phones (latest

Could not find your post for 4 months ago. -------------- Original message -------------- From: "Anton Krall" <akrall-lists@intruder.com.mx> > Yes, check a post that I made about 4 months ago, I posted the cofig for > setting the speaker, handset and ring volumes .. > > |-----Original Message----- > |From: asterisk-users-bounces@lists.digium.com >

I'm trying to build NUT 2.2.1 on a SunBlade 2000 running Solaris 10 (Solaris 10 11/06 s10s_u3wos_10 SPARC) It won't compile. I'm not a programmer, so I'm afraid I don't know why... [huge at anubis ~/Prog/nut/nut-2.2.1]: ./configure --with-user=ups --with-group=nutNetwork UPS Tools version 2.2.1 checking build system type... sparc-sun-solaris2.10 checking host system type...

Hi Paul, > I have another NUT client for your client-projects[1] page: MonAMI[2]. > > MonAMI aims to be a "universal sensor framework". The data gathered from > MonAMI's NUT plugin can be sent to any of the output plugins. Currently, > these include Ganglia, Nagios, KSysguard and a file-logger (amongst others). interesting though I've not had time to

Hi all - I'm new to both UPS setup and SNMP on linux - so I'd appreciate any help I can get....I'm stuck! I'm running fedora core 5, and have installed net-snmp and nut. I'm trying to get my network connected UPS to this linux machine. My /etc/ups/ups.conf looks like this: [upsnetwork] driver = snmp-ups port = 172.31.254.7 community = public desc="Network

nut-2.6.5 Scientific Linux 6.3 APC AP9630 management card My basic question is, does nut's SNMPv3 implementation work? I have this in /etc/ups/ups.conf ...... [tfapc01] driver = snmp-ups port = tfapc01.testfest.ixorg.org mibs = apcc snmp_version = v3 secLevel = authPriv secName = tfsnmpprof1 authPassword = ralow6moHet7zoboP8 privPassword = tuseL8Pakaz9degim7 authProtocol=MD5

Dear Ladies and Gentlemen, I have several old, yet functioning APC Smart-UPS (Model 600LS, Part AP600I, Firmware 6JI, no EEPROM, from 1991). They are not supported by Powerchute any more. I run NUT 2.6.5-4 on Windows XP SP3. I use COM1 port with cable 940-0024C. The connection fails with APC Smart protocol driver 3.0 (2.6.3-3534:3540M), APC command table version 3.0 or higher - it works with APC

Hello. Trouble to communicate with APC SmartUPS via serial port. UPS connected to the com1 port on windows host. Communication witch hyperterm works well. There is a log: YSM ^ASmart-UPS SC1000 n5S0713T63247 m03/29/07 L240.0 B27.10 apcupsd also can communicate with the UPS and works well. running apcsmart -a ups gives the following: com1: device reports different attributes than what were set

On Wed, 2011-09-14 at 12:24 +0000, Charles Lepple wrote: > Author: clepple-guest > Date: Wed Sep 14 12:24:58 2011 > New Revision: 3225 > URL: http://trac.networkupstools.org/projects/nut/changeset/3225 > > Log: > Silence redefined PACKAGE_ macro warnings > > This should be fixed properly upstream, but in the mean time, the SNMP-based > tools can't use these

Updating an old thread. History here. http://lists.alioth.debian.org/pipermail/nut-upsdev/2013-January/006391.html http://lists.alioth.debian.org/pipermail/nut-upsdev/2013-February/006394.html http://lists.alioth.debian.org/pipermail/nut-upsdev/2013-February/006398.html On Fri, 1 Feb 2013, Tim Rice wrote: [snip] > > In all my testing I discovered the APC AP9630 is kind of flaky when >

I'm trying to configure and build the current bits from the CVS tree, I've used autoconf (GNU Autoconf) 2.52 to generated configure from the configure.ac file. When I run configure on Solaris 9 I get a failure thus: $ ./configure .... checking for OpenSSL directory... /usr/local/ssl checking for RSA support... yes checking whether OpenSSL's headers match the library... yes checking

Hi, Most people probably builds samba with GCC on linux. I built it on SPARC/Solaris9 using Sun's Studio7 C-Compiler just now and got some output that I cant use but it migth possibly be useful for you guys to chase a few bug with. Its just the compilerun output, which succeded, but with quite a few warnings. Its attached to this mail. --

Hi Michal, I've cc'ed -upsdev, since some info could be interesting for everybody. 2011/5/27 Michal Soltys <soltys at ziu.info> > On 11-05-25 09:35, Arnaud Quette wrote: > > Hi Michal, > > > > 2011/5/25 Michal Soltys <soltys at ziu.info <mailto:soltys at ziu.info>> > >(...) > > > > I'm preparing larger patchset with

On several occasions I have seen the apcsmart process runaway using 100% CPU while filling my syslog partition by logging the following syslog entries at an incredible rate. I have seen up to 21,800 log entries PER SECOND of the following nature: --[snip]-- Jun 25 10:06:38 servername apcsmart[4012]: Communications with UPS lost: Communications with UPS lost - check cabling Jun 25 10:06:38