similar to: [PATCH] Add support for Liebert PowerSure PSA to liebert-hid.c

[FAQ on USB-connected UPSes] > Remember: this is brand new *experimental* software and is probably > very broken. Do us a favor and report successes or failures to > the mailing lists. No problem ... : UPS: Liebert PowerSure PSA 500 NUT: Version 2.0.2 Kernel: 2.6.11.5, with CONFIG_USB_HID, CONFIG_USB_HIDINPUT, and CONFIG_USB_HIDDEV compiled in (statically)

Jochen Bern wrote: > > Peter Selinger wrote: > > have you been able to get your Liebert UPS to work? If I am correct, > > it should work with the newhidups Belkin subdriver. Could you please > > post your results? I am curious to know if this works or doesn't - and > > if yes, we should add permanent support for Liebert into NUT. > > I'm sorry, but

Hello everyone, Charles suggested (about a week ago) that I repost to this list. I took a moment to run some additional tests ... The basics: -- UPS: Liebert PowerSure PSA 500 (from the 230 VAC / 50 Hz line) -- Kernel: 2.6.11.5 (from sources), USB support (down to and including CONFIG_USB_HIDDEV) compiled in statically (not as a module) -- Rest of OS: Basically still from the original SuSE

please reply to the list. thanks! See below. On Apr 3, 2014, at 3:10 AM, Daniele Borghesi wrote: > thanks for your reply. I'm running the latest version of FreeNAS based on 9.2 with NUT 2.7.1 > > [root at archivio ~]# uname -a > FreeBSD archivio.dannyb78.home 9.2-RELEASE-p3 FreeBSD 9.2-RELEASE-p3 #0 r262572+ > 38751c8: Thu

Hi all, I?ve a UPS Liebert GXT3 500-3000VA with USB port. I?ve install NUT version 2.2.2 from repository packages for Debian Lenny. Linux kernel 2.6.26 I?ve try to use usbhid-ups driver in ups.conf [liebert] driver=usbhid-ups port=/dev/usb/hiddev0 Debian get the usb: # lsusb -v Bus 001 Device 002: ID 10af:0008 Liebert Corp. PowerSure Interactive UPS Device Descriptor: bLength

Hello, I need help configuring my USB connected UPS "Emerson Power Liebert PowerSure PSI 1440" to my freebsd machine, using NUT. here's the manufacturer's product page http://www.emersonnetworkpower.com/en-US/Products/ACPower/Pages/LiebertPowerSurePSILineInteractiveUPS10003000VA.aspx I'm not a BSD expert, so please ask me for any information you need. regards Daniele

Hi, I have a Liebert POWERSURE PSP connected via USB. Cleanly built and installed from source nut-2.4.3.tar.gz using kernel 2.6.30.5 #cat /proc/bus/usb T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=10af ProdID=0003 Rev= 0.00 S: Manufacturer=Liebert S: Product=Liebert PSP 350 FW: 02 S:

Hi all, This is my first experience with NUT. I'm trying to test a Liebert PSA 1500 UPS, connected via USB to a single PC. I have followed the instruction in the "Configuration" section of the online user manual. Everything seems to be fine, except that, when I run "upsc liebert at localhostups.status", it retuns "OB", even if the UPS is currently online. Here

Hi, I have a Liebert PowerSure Personal XT that I have connected via its USB interface. lsusb shows that it is there and when I plugged in I got the kernel messages: Jul 3 11:25:37 mint kernel: usb 2-2.2: new low speed USB device using address 4 Jul 3 11:25:38 mint kernel: hiddev96: USB HID v1.11 Device [LIEBERT PowerSure Personal XT] on usb-0000:00:10.0-2.2 The documentation suggests that

Hello, I (now) own an Emerson Liebert GXT3 6000VA conected via USB. I've searched the web trying to configure nut (nut-2.6.5-1.el6.x86_64 epel rpm on CentOS 6.3) to monitor the UPS, but couldn't find a successful configuration. I'm running kernel 2.6.32-279.14.1.el6.x86_64. The UPS is connected with an USB cable: Bus 004 Device 002: ID 10af:0008 Liebert Corp. PowerSure Interactive

Replaced ups with a new Liebert UPS and it seems the device may not be known to nut. Below is output of lsusb: ID 10af:0002 Liebert Corp. PowerSure PST UPS Sent from Outlook<http://aka.ms/weboutlook> -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://alioth-lists.debian.net/pipermail/nut-upsuser/attachments/20231204/7c08a727/attachment.htm>

Hi, Back in 2011, it was reported that Liebert PSA devices persist in reporting OB (On Battery) when using usbhid-ups regardless of the actual state. Pier Paolo did some work (2011) which reportedly solved the issue. However, that doesn't seem to have reached mainstream and I now face the same problem. I'm using NUT 2.6.3 with a new Liebert PSA 1500Va that only ever reports OB and

Likely because 2.6.3 is not a current release. 2.7.2 (or 3?) is rhe current version, and it makes little sense to backport changes. Nut is a trivial compile . . . 'Use the source, Luke . . .' - Tim On October 17, 2014 6:05:35 PM CDT, Derek Harding <derek at lagham.org.uk> wrote: >Hi, > >Back in 2011, it was reported that Liebert PSA devices persist in >reporting OB

Begin forwarded message: > From: "Paul Smith" > Subject: Liebert PSA UPS problem. > Date: July 31, 2013 4:42:33 PM EDT > To: <nut-upsuser at lists.alioth.debian.org> > > Hi all, > A brief summary: > > I have a new Liebert PSA UPS which I wanted to help support my FreeNAS box (a FreeBSD 8 variant). Unfortunately the nut-ups implementation here for

Hello The page https://networkupstools.org/ddl/Liebert/PSA_1500.html don't contain all information about UPS series PSA. First, the variable "*device.serial*" is dummy, it is always empty , and "*ups.serial*" also always empty. Second, configuration file for the all UPS "PSA" contain these lines: [PSA] ??? driver = "usbhid-ups" ?? ?port =

Hello. I have Liebert GXT3 UPS connected to CentOS Linux with kernel 2.6.32-131.0.15.el6.x86_64 and nut version 2.6.5-2. lsusb: Bus 002 Device 003: ID 10af:0000 Liebert Corp. UPS And this UPS detected only with this section in ups.conf: [liebert] driver = liebert port = /dev/ttyS0 but only this variables available: device.mfr: Liebert device.model: MultiLink device.type: ups

Anyone have any advice what I need to do next? Regards, Paul. -----Original Message----- From: Nut-upsuser [mailto:nut-upsuser-bounces+paul=smithp.co.uk at lists.alioth.debian.org] On Behalf Of Charles Lepple Sent: 02 August 2013 11:36 To: nut-upsuser list Subject: [Nut-upsuser] Fwd: Liebert PSA UPS problem. Begin forwarded message: > From: "Paul Smith" > Subject: Liebert PSA

On Oct 17, 2014, at 8:31 PM, Tim Dawson <tadawson at tpcsvc.com> wrote: > Likely because 2.6.3 is not a current release. 2.7.2 (or 3?) is rhe current version, and it makes little sense to backport changes. Tim, It's possible that these changes didn't make it in. I admit that would be my knee-jerk reaction to seeing an older version number, but the last occurrence of

nothing appens. The output is exactly the same as below (attached screen with freenas config) [image: Immagine in linea 2] 2014-04-03 13:16 GMT+02:00 Charles Lepple <clepple at gmail.com>: > please reply to the list. thanks! > > See below. > > On Apr 3, 2014, at 3:10 AM, Daniele Borghesi wrote: > > thanks for your reply.* I'm running the latest version of

I downloaded latest source and it compiles ok but the original usbhid-ups.c is unchanged. Pier changed other files, too, and I don't know the changes needed. Simply substituting the modified (as per 2011) usbhid-ups gives a failed connection to the ups. So I have tried a little. I'll uninstall 2.6.3 and try to install 2.7.2 from a fresh compile. Thanks for the responses so far :-) --