similar to: updates to man pages

On 5/23/07, Kjell Claesson <keyson-guest at alioth.debian.org> wrote: > Author: keyson-guest > Date: Wed May 23 21:12:51 2007 > New Revision: 915 > > Log: > - Enabled requested Alarm function in bcmxcp.c > > Modified: > trunk/ChangeLog > trunk/drivers/bcmxcp.c Looks like this breaks when HAL is enabled. At the end of:

2009/8/28 Thomas Zulliger <Thomas.Zulliger at quiksilver.com.au> > Hi Arnaud > Hi Thomas, > I'm experiencing exactly the same problem > > DNS-323 fun_plug Fonz > nut 2.4.1-1.tgz > powerware 3105 > using BCMXCP_usb > > /mnt/HD_a2/packages # lsusb > Bus 002 Device 001: ID 0000:0000 > Bus 001 Device 002: ID 0592:0002 Powerware Corp. > Bus 001

I tried switching to the USB version of bcmxcp_usb and get this error when I try starting up upsdrvctl or bcmxcp_usb like so: /etc/nut/bcmxcp_usb -DDDD -a powerware -u nut I used this for ups.conf: [powerware] driver = bcmxcp_usb port = auto With the serial/usb dongle, I used this successfully: [powerware] driver = bcmxcp port = /dev/ttyUSB0 What devices does

On 13/02/14 12:16, Charles Lepple wrote: > On Feb 12, 2014, at 7:50 PM, Tim Dawson wrote: > >> Run the driver with -DDDDD and see what variables it picks up. I have noted that with the Prestige 9 in bcmxcp, some variables are not consistent within models, and had to do some gentle remapping to get things to work correctly. I ran the new driver (see below) and with -DDDD it throws out

Hi everyone, First of all a big thank you for the NUT package, I've been using it for years and couldn't get by without it! I have two Powerware UPS's here, a 9120/1500va and a 5110/700va. The 9120 has used a hacked bcmxcp driver (serial) from the 2.0.2 nut version for about a year now (which I'll explain more about in a seperate email to the dev list), and the 5110 which I just

Hello... I have a PowerWare 9120 attached via USB to my Debian system. My ups.conf looks like this: [ups1] driver = bcmxcp_usb port = auto desc = "PowerWare 9120" When testing the driver with "upsdrvctl -u root start" I get: Network UPS Tools - UPS driver controller 2.0.4 Network UPS Tools - BCMXCP UPS driver 0.10 (2.0.4) Communications with UPS

All, With AsciiDoc, we can make use of some macros to cut down on some of the repetition in the driver man pages. I don't want to go overboard on this, though - I know that drivers aren't meant to be invoked directly by users anyway. I propose that we put all of the gory details into the nutupsdrv(8) man page (mostly there anyway), and just add a few basic options to the

Hi all, I've hooked up an Eaton Powerware 5110 to Ubuntu 13.10 server, and configured nut appropriately. The cgi scripts are working fine, but on upsstats.cgi, the Batter, UPS Temp and Battery Runtime fields are all blank - and there are no entries for these values in the 'All data' tree. I've checked the man page for bcmxcp_usb

I've got some strange problem with NUT on my 5115 on Debian Etch: ---snip--- $ sudo ./bcmxcp_usb -DDDDDDD -a 5115 Network UPS Tools - BCMXCP UPS driver 0.13 (2.3.0-1181) Warning: This is an experimental driver. Some features may not function correctly. debug level is '7' Can't set POWERWARE USB configuration Unable to find POWERWARE UPS device on USB bus Things to try: -

Hi all I'm busy testing the Powerware9120 and am stuck at the powering down of the UPS. I'm running the latest Debian Lenny and here is my versions Network UPS Tools - UPS driver controller 2.2.2 Network UPS Tools - BCMXCP UPS driver 0.14 (2.2.2) ups.conf [pw] driver = bcmxcp_usb port = auto shutdown_delay = 60 I get all the correct info from the UPS and NUT works great and

Hi I have PW 5115 500 UPS which has both RS232 and USB connectors. bcmxcp driver works fine with serial connection but bcmxcp_usb does not with USB one. After some USB sniffing on windows box I've found that PW5115 communicates in other way than supposed in driver. Applying attached patch makes driver to work properly. System: FreeBSD 6.2 but ugen driver needs patching in order to respect

Hi, I recently downgraded my kernel to 2.4 series (2.4.32-rc2). Now I can't get nut running. It was fine with 2.6.14. It say's: --------------------- # ./bcmxcp_usb -uroot AUTO Network UPS Tools - BCMXCP UPS driver 0.10 (2.1.0) Can't reset POWERWARE USB endpoint Unable to find POWERWARE UPS device on USB bus ... --------------------- I've straced it in nut_usb.c

Hello, I 'm trying to set up an Eaton PW5110 using nut-2.4.1 in OpenBSD, my ups.conf follows : [myups] driver = bcmxcp_usb port = auto desc = "Eaton PW 5110 (1500VA)" My first attempt to run upsdrvctl ended up complaining about unimplemented usb_clear_halt() in libusb. I patched libusb-0.1.12 with the following patch :

Hi, I'm trying to get a Powerware 3105 UPS working on SuSE 10.0. I have compiled nut from the current Subversion repository. This UPS uses the bcmxcp_usb driver. I cannot get the driver to find the ups on the USB bus. The error message I get is:- -------------- bcmxcp_usb -u nut -DDDDD -a pw3105 -------------------- Network UPS Tools - BCMXCP UPS driver 0.10 (2.1.0) debug level is

Hi I have the following UPS : ups.mfr: Eaton ups.model: POWERWARE UPS 500i ups.power.nominal: 500 It is using the bcmxcp_usb driver. I started the driver with debug options, and noticed the following for the meter map : 0.475625 0027 0000 51 output.frequency 0.475634 0028 0004 51 input.frequency 0.475641 0033 0008 51 battery.voltage

Hello: I have a UPS model MXE II MAXIM brand online, 3500VA 2100W. Connects to the PC by a USB 2.0 port. I wanted to use nut, but this brand is not on the list of nut drivers. lsusb returns: ... Bus 003 Device 003: ID 06DA: 0201 Phoenixtec Power Co., Ltd ... I did not find this manufacturer in the driver list. Anyone know if you can have compatibility with other make and model of UPS. With

Hi all, I couldn't cross-compile NUT for uClibc x86_64 with shared libm, but the problem may show up with any other target as well. ldexp() requires "-lm" and most toolchains are happy without it, but picky ones aren't. This is a trivial patch to keep all linkers happy. Regards, diff -Naubr nut-2.7.2.old/drivers/Makefile.am nut-2.7.2.new/drivers/Makefile.am ---

Citeren Kjell Claesson <keyson-guest op alioth.debian.org>: > Author: keyson-guest > Date: Mon Mar 23 17:37:37 2009 > New Revision: 1817 > > Log: > data/driver.list, add Eaton Powerware 9130 compatibility with bcmxcp > and usbhid-ups. 1) Is this really true? I would have expected that this device would be supported through bcmxcp (serial) and bcmxcp_usb (USB), like

Nut for Windows 2.6.3-3 + Eaton/PW 5110 (103004256-5591). I had to manually install libusb driver and I'm using bcmxcp_usb. upsd.exe is reporting to me "Out of memory". It will run, but once anything connects to the daemon, it dies with that message. I don't have much experience with NUT yet so I'm not sure what the next course of action is. I do have NUT for Windows

Hi. I'm using ubuntu 10.04 and I'm in the process of buying a ups. This is it (eaton 5115 ups) with usb interface http://powerquality.eaton.com/05146561-5591.aspx?CX=3 I had a look at the ups compatibility chart here: http://www.networkupstools.org/stable-hcl.html But I can't find this particular ups listed. I plan to use NUT v. 2.4.3 that I can get from the