similar to: [nut-commits] svn commit r1582 - in trunk: . data docs drivers man

I've recently been working a bit on adding PDU (http://en.wikipedia.org/wiki/Power_distribution_unit) support in NUT. Some of you might have seen the Powerman thread, which also deals with adding more PDUs support: http://powerman.sourceforge.net/supported.html The result is that we now have support for 2 Eaton | Powerware ePDUs (Managed and Monitored iirc, check http://www.epdu.com). I plan

Has anyone ever heard of this so called Dynamic Impedance matching on the ADIT 600? I called their support and they've never heard of it. We are of course having echo problems are on the far end due to digital/analog conversion on the local end using a channel bank. We have purchased an ADIT 600 and yes the complaints are "far less" however we're still getting them. While I have

I'm currently trying to install samba 2.0.3 following DIAGNOSIS.txt on Solaris 2.7 When I try "net view \\ampere" ( ampere = samba server ) I got the following : Error 86 ... bad password ( in french : erreur 86 , mauvais mot de passe, contacter votre administrateur reseau...) what can I do ? I believe the error comes from the smb.conf but I tried several changes and none were

Hello people, I am having difficulties figuring out the POE power draw in watts from a Polycom IP601. I want to know how many IP601's can be powered from the Cisco Catalyst 3560G-48PS. The IP601 wallwart has: Input 120VAC 60hz 19W, Output 24VDC 500mA. I assume the output is appropriate value to figure out how many phones can be powered. The Cisco 3560 datasheet says "the 48-port PoE

Hi Arnaud & Charles, You?ll have to forgive my low level of Linux Understanding here?. I downloaded the source files, modified the appropriate driver file, re-compiled it (all of this was a lot of research and learning!) When I use the new driver I get ? Network UPS Tools - UPS driver controller 2.7.2 Network UPS Tools - MGE UPS SYSTEMS/U-Talk driver 0.93 (2.7.4.1) Can't chdir to

> Hello everyone. I try to connect four PowerMust 2000 ups's via usb to one > computer using megatec_usb driver. But megatec_usb completly ignores port > directive in ups.conf, I even try port = /dev/null and megatec_usb founds > ups and it works. The 'port' is not used for USB connected devices, it's only needed for compatibility reasons. > Problem is that

Dear List, I have one last little problem with setting up an cluster. My gfs Mount will hang as soon as I do an iptables restart on one of the nodes.. First, let me describe my setup: - 4 nodes, all running an updated Centos 5.2 installation - 1 Dell MD3000i ISCSI SAN - All nodes are connected by Dell?s Supplied RDAC driver Everything is running stable when the cluster is started (tested

Hi, just try the Unitek Self Protek Mistral 1000ipF with nut and I doesn't work. How can I correctly configure it (if the driver support it). Best regards, In my dmesg: [42953293.620000] usb 1-2: new low speed USB device using uhci_hcd and address 7 [42953293.760000] usb 1-2: no configurations [42953293.760000] usb 1-2: can't read configurations, error -22 [42953293.880000] usb 1-2: new

Hello list, ? ?Cannot make Evolution 850 to be recognized, maybe the problem is "Warning: incomplete endpoint descriptor" in lsusb? Details are as follows. NUT installed by download of debian package. Any ideas/suggestions are highly welcome, thanks in advance! --ValenteM = ? ?= ? ? = ? ? = Ubuntu server 12.04.1 LTS (GNU/Linux 3.2.0-35-generic x86_64) sudo dpkg -i

charge, but instead will be raised a few seconds before the power will be cut by the UPS, either because of a low battery event or a user initiated shutdown (with delay) command. The thing I don't like about that, is that by that time the shutdown sequence has apparently already started by the UPS, which means that we have no control over when the power will be cut. Also, if it indeed only

Hi nut-upsdev, I have just got OMRON BX35F. Only object files and usage information is included. Where should I start to help you to get it supported? Any interest in supporting it at all?

I 'm currently running a SUN SparcStation with Solaris 2.7 and Samba 2.0.3 Samba runs as domain master and i got security=user and i enabled plain text password on PCs but those Win98 boxes are unable to change their password ( password fail) So i want to try with encrypted password but i can't find mksmbpasswd.sh. Can anyone tell me where to find it ( NOT in source please, i tried

On Sep 6, 2014, at 4:16 PM, Leslie Rhorer <lrhorer at mygrande.net> wrote: > Oh, hey! That seems to have worked. I'm sure the UPS got plugged into a different port one of the (many) times the server was removed from the relay rack, and it was on a USB 3.0 port. I moved it to a 1.0 port and everything seems to be working just fine. The specifics of the motherboard and its USB

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I'm in the process of upgrading my solution to spread the load over two ups'es. Both are Cyberpower, where one is the classic "Intelligent" 1500LCD, the other a "Value" 2200E Both connect via UPS, and both work using the ups-hid driver. So far so good. The idea is to connect both of them via USB to the same FreeBSD 8

Hi, I've got two Dynamix UPS's, both of which are USB and don't seem to work with NUT yet. Can anyone give me some advise on where I should start with working on getting them working. I can do a little C programming, so happy to give things a go but need some guidance. Brian R. Smith (who also subscribes to this list) has one as well. I've attached the output of lsusb -v and

Hi, I have a powermust with a usb connector. I searched the archive and found this post: http://lists.alioth.debian.org/pipermail/nut-upsdev/2006-April/000816.html Must I abandon hope of controlling this UPS via USB with NUT? Added this line to /etc/udev/rules.d/70-nut-usbups.rules: # OMRON - usbhid-ups SYSFS{idVendor}=="06da", SYSFS{idProduct}=="0003",

>> Over the last couple months, we have had a couple incidents (luckily a= ll >> on weekends) where all 15 UPSs will mysteriously shut off, and we had = to >> manually power them back up. To top it off, there was nothing in syslo= g >> about any UPS going onto battery power and staying there - just a coup= le >> curious low-battery warnings from one of the UPSs. You

On 9/6/2014 12:47 PM, Charles Lepple wrote: > On Sep 6, 2014, at 12:39 PM, Leslie Rhorer <lrhorer at mygrande.net> wrote: > >> I made a number of hardware and software changes, including an upgrade to the latest software versions for that distro (Debian Wheezy), > > Can you be more specific about the changes? Well, I did an automated upgrade (apt-get upgrade), I changed

Bonjour, Je souheterais utilis? la version qui permet le '-x generic',mais je ne sais pas ou la recuperer car ca devrait solutionner mon probleme (cf mail ci-dessous) DaneZ _____ From: DaneZ [mailto:david.guillotte@danez.no-ip.org] To: arnaud.quette@mgeups.com Sent: Sat, 08 Jul 2006 23:24:06 +0200 Subject: Fw: INFOSEC 500 XP en USB _____ Bonjour Arnaud, Je me

Hi, I have two ups (Turbo-X 1000SD, Turbo-X 1500SD). The both report themselves as # lsusb Bus 008 Device 002: ID 0001:0000 Fry's Electronics The are produced by MEC and report MEC0002 as product (although the working one report it in dmesg but not in lsusb) The 1000 (bcdUSB 1.00) works with blazer_usb while the 1500 (bcdUSB 1.10) doesn't. I am attaching lsusb and blazer_urb output