similar to: Fwd: Megatec - modem control lines [impact to megatec_usb]

On Mon, Oct 20, 2008 at 1:35 PM, Arjen de Korte <nut+devel at de-korte.org> wrote: > Citeren Carlos Rodrigues <cefrodrigues at gmail.com>: > >> BTW, the patch has a small typo in one of the comments: "applied to >> battery.volage" :) > > I'll leave that up to you to correct. Since it is only a comment, it won't > be visible to innocent users

Alexander Gordeev wrote: > Author: agordeev-guest > Date: Mon Aug 13 13:09:43 2007 > New Revision: 1049 > > Log: > drivers/megatec_usb.c: added credits to the banner message. Is this really needed/desirable? I think this kind of information needs to be put in the AUTHORS document. There are many more people on this list that put a lot of effort in NUT, without claiming credit

Hi! I don't know how I missed it before, but "bestups" seems to implement mostly the same protocol as megatec. Is anybody out there using this driver willing to try "megatec" to see if it works? AFAIK, the only difference seems to be the command that gets the UPS identification data ("I" on "megatec", "ID" on "bestups"), but

Hi! I don't know how I missed it before, but "bestups" seems to implement mostly the same protocol as megatec. Is anybody out there using this driver willing to try "megatec" to see if it works? AFAIK, the only difference seems to be the command that gets the UPS identification data ("I" on "megatec", "ID" on "bestups"), but

--- Arjen de Korte <nut+users at de-korte.org> wrote: > > > I also did: > > > > # ./megatec_usb -DDDDD -x vendor=06da -x mfr=OMRON > > /dev/usb/hiddev0 > > Please have a look at 'man 8 megatec_usb' again. > > You probably need to specify the '-x vendorid' and > '-x productid' options > and most likely, the

--- Arjen de Korte <nut+users at de-korte.org> wrote: > > > I also did: > > > > # ./megatec_usb -DDDDD -x vendor=06da -x mfr=OMRON > > /dev/usb/hiddev0 > > Please have a look at 'man 8 megatec_usb' again. > > You probably need to specify the '-x vendorid' and > '-x productid' options > and most likely, the

Hi, a few days ago, I bought some of those Mustek UPSes that have both a serial and a USB connector. Currently only the serial port is supported by the megatec driver. This works fine so far. Now I have seen there is a megatec_usb driver, which currently only supports 2 other UPSes. How can I help to find out whether the PowerMust might actually work with the megatec_usb driver? -- Regards,

Hi! I am trying to get an Atlantis-Land 1501 UPS to work under OpenBSD. The UPS works OK under Linux + megatec_usb driver+nut_2.2.2. What I get under OpenBSD is: root at puffwall:~ # dmesg OpenBSD 4.3 (GENERIC) #698: Wed Mar 12 11:07:05 MDT 2008 deraadt at i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel Pentium III ("GenuineIntel" 686-class, 128KB L2

Hi! I am trying to get an Atlantis-Land 1501 UPS to work under OpenBSD. The UPS works OK under Linux + megatec_usb driver+nut_2.2.2. What I get under OpenBSD is: root at puffwall:~ # dmesg OpenBSD 4.3 (GENERIC) #698: Wed Mar 12 11:07:05 MDT 2008 deraadt at i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel Pentium III ("GenuineIntel" 686-class, 128KB L2

Hey all, thanks for your work on nut. I recently got myself a new cheap UPS, and have thus far determined very little about it. I can run whatever you like to help identify and work with it. So far I've played around with various settings and have had some limited success with the megatec_usb driver (Debian testing version): ----ups.conf---- [plexus] driver=megatec_usb model=500VA mfr=Plexus

Trying to use it with Sven Smart RM2000 (seems to be an OEM clone of Sysgration Smart RM UPS: http://www.sysgration.com/product.asp?KID=7). I have just compiled the latest svn trunk. Unfortunately it does not work with that UPS: dbely at vserver1:~/nut-svn$ sudo /usr/local/ups/bin/megatec_usb -u root -a myups Network UPS Tools 2.1.0 - Megatec protocol driver 1.5.3 [megatec_usb] Carlos Rodrigues

Does this require a new entry in scripts/hotplug/* and scripts/udev/*? -- Peter Alexander Gordeev wrote: > > Author: agordeev-guest > Date: Sat May 26 12:04:26 2007 > New Revision: 924 > > Log: > data/driver.list: added SVEN Power Smart RM 2000 to the list. > > Modified: > trunk/ChangeLog > trunk/data/driver.list > > Modified: trunk/ChangeLog >

Hello again! Thanks to the precious help from Henning Brauer, I managed to solve an issue with my UPS (a rebranded UPS speaking in Ablerex-ese over USB). Under OpenBSD 4.3, the UPS was claimed by HID. Now that I recompiled the kernel, adding a USB_quirk, this is what I get when I insert the USB cable: ugen0 at uhub0 port 2 "UIS_ABLER USB to Serial" rev 1.00/1.00 addr 2 So far, so

Hi, I'm new in the list and I'm having a little bit trouble to put the megatec_usb to work. I've been using NUT for a while with the apc and megatec driver (serial), with no problem. The server is a Ubuntu 8.04.2 with NUT version 2.2.1-2.1ubuntu7.2, the default package version in this ubuntu release. I've configured the ups.conf as follows: [sms] driver = megatec_usb

Hi, I'm new in the list and I'm having a little bit trouble to put the megatec_usb to work. I've been using NUT for a while with the apc and megatec driver (serial), with no problem. The server is a Ubuntu 8.04.2 with NUT version 2.2.1-2.1ubuntu7.2, the default package version in this ubuntu release. I've configured the ups.conf as follows: [sms] driver = megatec_usb

Hi, Just purchashed this UPS. The megatec_usb driver appears to be communicating with the UPS - however, the ups.status field always states "off" /usr/local/ups/bin/megatec_usb -a plexus -DD Network UPS Tools 2.2.1 - Megatec protocol driver 1.5.9 [megatec_usb] Carlos Rodrigues (c) 2003-2007 Serial-over-USB transport layer for Megatec protocol driver [megatec_usb] Andrey Lelikov (c)

Hi, Just purchashed this UPS. The megatec_usb driver appears to be communicating with the UPS - however, the ups.status field always states "off" /usr/local/ups/bin/megatec_usb -a plexus -DD Network UPS Tools 2.2.1 - Megatec protocol driver 1.5.9 [megatec_usb] Carlos Rodrigues (c) 2003-2007 Serial-over-USB transport layer for Megatec protocol driver [megatec_usb] Andrey Lelikov (c)

Hi Jon, your patches are malformed because (presumably) your email client wrapped this lines. Could you please send these as a unified diff ("diff -u"), and send them in attachments, rather than as a copy-and-paste? Thanks, -- Peter Jon Gough wrote: > > Peter, > Here are the files I have worked on. I hope I have diff'd them > correctly. I have not touched the

Hi Andy, I've forwarded your info to the development list, and Carlos Rodrigues (the megatec driver author and maintainer. As a side note, there is a megatec_usb driver underway. You might want to give it a try. @Carlos: I let you update the drivers.list. Thanks for your report, Arnaud Quette -- Linux / Unix Expert - MGE UPS SYSTEMS - R&D Dpt Network UPS Tools (NUT) Project Leader -

> Author: aquette > Date: Thu Jun 21 07:43:46 2007 > New Revision: 971 > > Log: > fix communication lost status handling > > Modified: > trunk/ChangeLog > trunk/drivers/usbhid-ups.c > > Modified: trunk/ChangeLog > ============================================================================== > --- trunk/ChangeLog (original) > +++ trunk/ChangeLog