Displaying 20 results from an estimated 5000 matches similar to: "RE hp r/t2200 and NUT"
2006 Sep 12
1
Build 2.0.4, usb.h missing.
Hi!
I've got a Mandrake 2006.0 machine and a APC Back-UPS Pro 500/1000/1500
(from lsusb). The Mandrake package version of nut is 2.0.1 and hidups
actually detects the UPS, however I get loads of these:
Sep 12 18:26:11 vader hidups[7658]: Ignoring x86 page event 0xff860080 (0)
Sep 12 18:26:11 vader hidups[7658]: Unhandled event: 0x840058 (6)
Sep 12 18:26:11 vader hidups[7658]: Unhandled
2007 Jan 19
5
Install problem & Geek Squad UPS
I Seem to have made some progress in getting nut-2.0.5 installed, but
hidups still has a version number of 0.13. First is hidups 0.13 the
correct version? if not how do I find the correct version. Second if my
Geek Squad GS1285U UPS is not supported how do I proceed. I have been a
programmer for 35 years(mostly high level computer aided design),
written code in 20 some languages, am retired
2006 Jan 13
1
hidups Vs newhidups (was: SUSE 10.0 packaging)
2006/1/13, Paul Mogren <fkamogee@yahoo.com>:
>
> This thread is FYI. I don't need any help here.
>
no, but some details for those who will read it, maybe ;-)
I have SUSE 10.0 and an MGE Ellipse. I installed the NUT package from MGE.
>
> 1) The generated ups.conf pointed to a bad location:
> /dev//dev/input/event0
>
who generated that ?
it seems like an old hiddev
2007 Jan 21
1
TrippLite USB UPS
Good afternoon,
I am trying to communicate with a new Tripp-Lite UPS via usb and having little
luck. After more than a week on this I've decided to ask for help. I am very
inexperienced at posting information to message boards, so hopefully I'm
doing this right. I assume this is the correct place to post this message.
I will start with the equipment I have. I am using Debian Sarge
2006 Feb 21
3
newhidups and hidups drivers
I just installed NUT and my UPS is an APC Back-UPS ES 500. I looked in the list
of drivers and found APC Back-UPS ES 350 listed in "drivers.txt" -- that list
said I should use either the newhidups or hidups driver. I looked in the
installation and I found headers and c files to create these drivers (I think),
but in /usr/local/ups/bin there is no driver named, "newhidups or
2005 Dec 28
2
(no subject)
I'd like to submit a patch to the 'hidups' driver. I'm a bit new to
open-source development model, so I hope I'm not committing a faux paus by
just posting it here. I did verify that the problem still exists (by
source code inspection) in the latest dev snapshot, which is
nut-2.0.3-pre2. I'm using nut-2.0.2 myself.
The problem is when I'm connecting to my APC
2006 Dec 08
2
F6C1500-TW-RK
is there a way to override the productid (like -x productid=1234)
when using newhidups? just thought i'd try it with the F6C1500-TW-RK
over usb.
i was able to get hidups to work using the below settings, but it
provides limited information.
my ups.conf entry:
[belkin]
driver = hidups
port = /dev/usb/hiddev0
and the output of upsc:
gateway:/etc/nut# upsc
2007 Apr 12
1
APC 1500 USB problem
Hello,
We have two APC Back-UPS RS 1500 USB stuff, and i've got a bit
of a problem with it and NUT.
The usbdevs output:
addr 2: Back-UPS RS 1500 FW:8.g8 .I USB FW:g8, American Power Conversion
addr 3: Back-UPS RS 1500 FW:8.g8 .I USB FW:g8, American Power Conversion
(UPS1 and UPS2)
I've configured our NUT system to monitor the UPSes, and it went very
fine till the time had arrived for a
2005 Aug 01
3
Belkin F6C550-AVR UPS
Hi,
I got a Belkin F6C550-AVR UPS today and was trying to get it working
with NUT, I used the "hidups" driver and got some data out of it,
mainly the following:
battery.charge: 100
battery.runtime: 120
driver.name: hidups
driver.parameter.port: /dev/usb/hiddev0
driver.version: 2.0.0
ups.mfr: Unknown
ups.model: Unknown
ups.serial: Unknown
ups.status: OL
the versions of NUT that I tried
2005 Aug 01
3
Belkin F6C550-AVR UPS
Hi,
I got a Belkin F6C550-AVR UPS today and was trying to get it working
with NUT, I used the "hidups" driver and got some data out of it,
mainly the following:
battery.charge: 100
battery.runtime: 120
driver.name: hidups
driver.parameter.port: /dev/usb/hiddev0
driver.version: 2.0.0
ups.mfr: Unknown
ups.model: Unknown
ups.serial: Unknown
ups.status: OL
the versions of NUT that I tried
2007 Jan 04
3
hidups can't find device
Hello,
I try to install my APC Back-UPS RS 800 on my debian system (Etch):
Linux aigner 2.6.18-3-686 #1 SMP Mon Dec 4 16:41:14 UTC 2006 i686 GNU/Linux
When i try to start the driver an i use hidups i get this failure massage:
aigner:/lib/nut# upsdrvctl start
Network UPS Tools - UPS driver controller 2.0.4
Network UPS Tools: HID UPS driver 0.13 (2.0.4)
Warning: This is an experimental driver.
2006 Nov 14
1
Krauler UP-M500VA investigation
Hi, All!
I've recently bought an UPS. It is Krauler UP-M500VA, it has USB
port and is a HID device.
But as I discovered the only HID application it supports is 0x860004,
so it isn't claimed by both hidups and newhidups drivers, because it
uses a vendor-specific values. I tried to discover values in that x86
page, but I failed. How can I do it?
And after I get values how to understand
2006 Aug 15
2
CPS GS 1500U
Hello all,
Has anyone had any luck getting a CPS GS 1500U working with NUT via USB.
Its branded Geek Squad (don't ask) but it shows up in the USB device list as
the CPS 1500U. I'm running Kubuntu Dapper with all current updates
installed, Kernel 2.6.15-26-686, NUT 2.0.3. I've tried hidups and
newhidups. With hidups I used port=/dev/bus/usb/001/004 which I'm sure is
the UPS
2006 Jul 01
2
Unhandled event when using APC BackUPS Pro
Hi,
I'm new to nut, just installed it. I configured it using the hidups
driver to work with my APC BackUPS:
# upsc apc350@localhost
battery.charge: 100
battery.runtime: 885
battery.voltage: 13.5
driver.name: hidups
driver.parameter.port: /dev/usb/hiddev0
driver.version: 2.0.0
ups.delay.shutdown: -1
ups.delay.start: 0
ups.load: 660
ups.mfr: American Power Conversion
ups.model: Back-UPS CS 350
2005 Dec 08
2
Fw: NUT hidups dont working on new linux kernels
I am forwarding the below message. Does anybody on this list know
anything about this problem?
Petr - perhaps you should switch from the "hidups" to the "newhidups"
driver. I believe it supported the APC Back UPS even in NUT 2.0.2, and
it certainly does so in the Development version that you can get from
CVS (see the NUT download page).
Also, could you post the output of
2005 Oct 19
1
CyberPower 685AVR and newhidups
Hi Scott,
Scott Alfter wrote:
> I had a UPS go bad recently (shuts off all by itself for no good reason,
>AFAICT), so I bought a CyberPower 685AVR this afternoon. The two CyberPower
>drivers in NUT 2.0.2 don't know how to talk to it, but the hidups driver
>appears to work properly. This means you have to use USB instead of RS-232
(it
>supports both), but at least it works.
>
2005 Jun 23
1
USB UPS Question...
Hello,
I have been trying to get a TrippLite Internet Office 750 UPS to talk to
my Linux PBX for a couple of evenings now and I'm getting nowhere... I
tried searching the list archives before posting here (I'm sure I'm not
the first one to try to get this going) but they seem to be offline...
The UPS is unfortunately USB based but I thought I'd give it a try
anyway. Here is
2007 Mar 27
4
NUT-2.0.5: newhidups on RedHat ES4
Hello everybody,
After succeeded in "tuning" nut-2.0.0's hidups and 2.0.3's newhidups on
customized Linux kernels, we are now facing a new challenge : trying to
install nut-2.0.5 on a RedHat ES4 which is based on a 2.6.9 kernel.
I picked up the 2.0.5 source package and follow the INSTALL doc until step
6. So far so good.
RH ES4 is managed by udev, therefore I presume we
2007 Jan 19
1
Install question
I downloaded nut-2.0.5 and followed the install instructions down to
step 6. Since I will be using a USB port to connect to the Geek Squad GS
1285U did not go any farther yet. I tried to run "/lib/nut/hidups -DD -u
root auto" to see if it found my UPS. But it is still the old hidups
0.13 from nut-2.0.3. Do I need to do something additional to get the new
hidups?
2006 Jan 04
3
Xserve, USB, NUT
Hi - I have NUT running very nicely on a serial port on one of my OpenBSD
servers, and using hidups on a RHEL4 box. Now I'd like to run it on two
Macs, a PowerMac and an XServe G4. What is the USB port I need to
configure, and do I need the newhidups driver?
Thanks in advance for the help!
Ted