similar to: Patch -- SVN revision in the version string

Arnaud Quette wrote: > Anyhow, I would more see this as a merge of all these drivers, with > some autodetection or flag/param to switch the mfr/model and maybe > capabilities... Whatever the driver name is, a good thing would be the > name of the protocol or something generic enough, though powermust is > fine. Ok, I made some minor changes to powermust, to make it less

sent two 0 byte packets to the driver, then it sent 'URB_FUNCTION_SYNC_REST_PIPE_AND_CLEAR_STALL' down the pipe which seems to come back up as well, and then the UPS turned off. I'll play around later with what happens in that regard, although it may be a bit tricky to figure out when the battery is low without having it plugged in ;-) Also, about nut-usbups.rules.in... The

sent two 0 byte packets to the driver, then it sent 'URB_FUNCTION_SYNC_REST_PIPE_AND_CLEAR_STALL' down the pipe which seems to come back up as well, and then the UPS turned off. I'll play around later with what happens in that regard, although it may be a bit tricky to figure out when the battery is low without having it plugged in ;-) Also, about nut-usbups.rules.in... The

sent two 0 byte packets to the driver, then it sent 'URB_FUNCTION_SYNC_REST_PIPE_AND_CLEAR_STALL' down the pipe which seems to come back up as well, and then the UPS turned off. I'll play around later with what happens in that regard, although it may be a bit tricky to figure out when the battery is low without having it plugged in ;-) Also, about nut-usbups.rules.in... The

Best fortress support was understandably dropped, but we still use them, and someone else may want the driver I ported to nut-2.0. We also often attach the serial cable from a UPS to a network terminal server, since servers these days don't come with very many serial ports. (They call them "legacy" ports.) I submitted a patch to support these for nut-1.x, and it was rejected

Hi Jon, your patches are malformed because (presumably) your email client wrapped this lines. Could you please send these as a unified diff ("diff -u"), and send them in attachments, rather than as a copy-and-paste? Thanks, -- Peter Jon Gough wrote: > > Peter, > Here are the files I have worked on. I hope I have diff'd them > correctly. I have not touched the

Hi Arnaud, Hi Scott, Hi list, Here is a patch to support the Zinto D from ONLINE USV-Systeme AG. I already sent a version to Russell Kroll (2006-04-09), without no response and I cannot find support for Zinto in svn until now. I found a discussion on this list about the Xanto from ONLINE, but the Zinto seems to use different commands. The commands are quite similar to those for Opti-UPS, so I

Hello, all. Some time ago I bought myself a UPS which was advertised as USB-HID. It was a surprise to learn that while it definitely is recognized as USB device, the HID descriptor has no UPS pages at all. The only software it came with was a windows program written in visual basic. Trying to research this topic I found a reference to energizer USB ups driver and learned about variety of

Hi! I've recently come into to the possesion of a couple of Belkin Omniguard 3200 UPS's. Given the horrible apache/java based software they come with, I decided to see if I cannot get them to work with NUT. To cut a long story short, they work out to be SEC -based, and extensively modifying the nut-1.4 driver code to come up with the attached two files. I've marked them

The tripplite driver was developed on a machine with a reliable serial connection, and inherited the assumption that the serial line connection would not drop, reorder, or fail character read and writes. This patch adds significantly improved failure mode handling and also does basic checks of data validity. There's also a few minor cleanups/beautification. I've tested this code on my

Description: Replace many usleep and some sleep calls with nanosleep. usleep is stated in its manual page as removed by POSIX. Contrary to its predecessors, nanosleep semantics is well defined. The replacement, which is mostly in drivers, is untested. Supplements http://bugs.debian.org/633791. Last-Update: Sat, 13 Aug 2011 14:04:48 +0300 Index:

Hi Henning, you should get in touch with Carlos, who his developing a generic megatec driver (available from svn: http://eu1.networkupstools.org/source.html) Arnaud -- Linux / Unix Expert - MGE UPS SYSTEMS - R&D Dpt Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer - http://people.debian.org/~aquette/ OpenSource Developer -

Arnaud, If memory serves, you're the one that 'invented' the upsdrv_info_t subdriver description structure. We seem to have an issue with this on Solaris. I suspect that we're introducing GCC specific behavior here. Technically the typedef here isn't possible in C89, since this suggests that sizeof(upsdrv_info_t) can be determined. This obvious is not the case, since

Dear Andreas, some googling revealed, you created a driver for the xanto series of online-usv.de. In what state it is currently? I've to manage a S2000 and would like to use nut for it, is it usable by now? Do you need another tester? TIA, Pete

On Wed, Sep 24, 2008 at 2:27 PM, Arjen de Korte <adkorte-guest at alioth.debian.org> wrote: > - /* Server side variables */ > - { "driver.version.internal", ST_FLAG_STRING, sizeof(DRIVER_VERSION), NULL, NULL, DRIVER_VERSION, HU_FLAG_ABSENT, NULL }, > - { "driver.version.data", ST_FLAG_STRING, sizeof(APC_HID_VERSION), NULL, NULL, APC_HID_VERSION,

Hi, I'm having a hard time configuring a Mustek Powermust 600VA ups to work via USB with nut. I read somewhere that nut works OK via the rs232 cable, but unfortunately I don't have a COM port in my computer. The kernel detects the ups as an Xbox pad :) and loads the xpad module. I tried running /lib/nut/megatec with different /dev/ttySx but it displays megatec protocol UPS was not

Hi ups-devel, As I looked throw www.networkupstools.org site, haven't found any pointers where to send patches, so I hope this is the right place. (Please let me know weather this is the right place.) The patch contains a minor change in the logic of the driver, our Effekta MHD 3000 UPS continuously writes status data to the serial port, so one has to send a CR character and empty the

Hello all, I'm trying to compile the 2.6.5 tarball on a non-developer system (a freshly installed OpenIndiana zone). Right away the make failed due to revision checks (fixed below) due to missing git and svn software (and for make, a failed step fails everything). The fix is to catch the non-zero return codes and just successfully set an empty string. Barring this, the default

Hi, We use LLVM libraries to compile C++ code and noticed slow downs when multiple threads of a process were compiling at once. *perf *indicated that most of the CPU time was spent in a spin lock, which was being locked/unlocked from llvm::PassRegistry::getPassInfo(). We read the relevant LLVM code and found out that PassRegistry is a ManagedStatic and is shared among all threads in case of a

Hello everybody! I'm trying to use nut-2.4.1 with brand new UPS Powercom Imperial IMD-825AP USB. I've faced a problem that the driver powercom despite specifying type=IMP automatically re-detects the UPS as "KIN" and then interprets raw data incorrectly. The same problem was reported by other Powercom users on the official support forum ( http://forum.pcm.ru ). I suppose the