similar to: success report with megatec and Belkin F6H650UkUNV (was: Success report with network UPS tools)

Hi Charles, On 10/12/14 14:27, Charles Lepple wrote: > Hi Andy, > > On Dec 8, 2014, at 7:07 PM, Andy Juniper <ajuniper at freeuk.com> wrote: > >> It adds a signal handler for the USR1 signal, which simply triggers it to abort the current sleep and log the requested now. > I will admit that I'm not an expert on how signals interrupt system calls on all systems, but

Hi Andy, On Dec 8, 2014, at 7:07 PM, Andy Juniper <ajuniper at freeuk.com> wrote: > It adds a signal handler for the USR1 signal, which simply triggers it to abort the current sleep and log the requested now. I will admit that I'm not an expert on how signals interrupt system calls on all systems, but for what it's worth, the code looks good to me. Is it correct to assume that

Hi, it'd be great if you could update the documentation on the website that some models of the Belkin -UNV series will only work with the megatec(_usb) drivers. I wasted a lot of time on trying to get it to work with the wrong drivers, and would like to spare others the pain :-). Thanks, ~David P.S. Some forum post said that the stable megatec drivers don't work 100% with the belkin UPS,

Hi, it'd be great if you could update the documentation on the website that some models of the Belkin -UNV series will only work with the megatec(_usb) drivers. I wasted a lot of time on trying to get it to work with the wrong drivers, and would like to spare others the pain :-). Thanks, ~David P.S. Some forum post said that the stable megatec drivers don't work 100% with the belkin UPS,

Hi Jayson, I forward your request to the right place. Carlos (or some other) will have an answer, or at least some questions for you. -- Arnaud 2008/6/27 Jayson Anderson <jayson.anderson at gmail.com>: > Greetings Arnaud, > > I wrote you some time ago about whether NUT would support the Belkin > F6H550-UPS device in the future. > > You had replied and mentioned to send

Greetings! Thanks to all the developers who have made this project so far. Searching for a Linux based Belkin UPS monitor led me straight to the Network UPS Tools. I have bought a Belkin F6C900-UNV (900VA) for use on a Slackware 10.2 server to replace an older APC model that died suddenly. So far I have successfully managed to get NUT 2.0.5 compiled and configured and found that this Belkin

# /lib/nut/megatec_usb -a myups Network UPS Tools 2.2.0- - Megatec protocol driver 1.5.4 [megatec_usb] Carlos Rodrigues (c) 2003-2007 Serial-over-USB transport layer for Megatec protocol driver [megatec_usb] No supported devices found. Please check your device availability with 'lsusb' and make sure you have an up-to-date version of NUT. If this does not help, try running the driver with

I recently bought a Belkin F6H375 UPS. It connects to the computer via USB. Searching the Internet led me to believe that the megatec_usb driver in nut supports this UPS, however I've been unable to get it to work. I have this in ups.conf: [belkinusb] driver = megatec_usb port = auto desc = "Belkin USB" Here's what happens when I try to use it: ~ #

Hi all, I've got nut going with a Belkin F6C120auUNV. I'm able to communicate with the UPS, upsc gives data: $ sudo upsc BelkinUPS battery.charge: 37 battery.charge.low: 30 battery.charge.warning: 30 battery.runtime: 120 battery.type: PbAc battery.voltage: 23.7 ... I've enabled the CGI, and when I go to upsstats.cgi, I see a line entry like this: System: BelkinUPS Model: [error:

Hi Everyone, I am new to UPSs and Linux.? I purchased a Belkin F6C750-AVR UPS for our church.? We are?running CENTOS 5.2. I tried the Linux Power Management Software that came with Belkin UPS with NO success. I installed the NUT software. After some experimentation I received some success with the megatec_usb Nut driver: [root at server bin]# /sbin/megatec_usb -u root -a serverups -DDDD

Hi everyone, I have a belkin ups that was bought around 2 months ago. It seems like the driver doesn't like the UPS, although on the website it's listed as supported. This is on a gentoo system with nut 2.2.1 . megatec_usb output: ---------SNIP---------- digamma nut # ./megatec_usb -a belkinm -DDDDDD Network UPS Tools 2.2.1 - Megatec protocol driver 1.5.9 [megatec_usb] Carlos Rodrigues

Hi, I bought a Belkin Active Battery Backup UPS (http://www.belkin.com/uk/activebattery/) yesterday with a USB port and hoped it would work with nut. The device will show up in /proc/bus/usb/devices as a Cypress Semiconductor USB to Serial. It creates /dev/hiddev0 (and this disappears when the UPS is unplugged). I've tried using belkin, belkinunv, usbhid-ups and megatec_usb. I've tried

I just bought a pair of Belkin USB UPSes -- F6C1200-UNV and F6C550-AVR -- and installed the latest version of nut under Ubuntu 7.04. I'm using the F6C1200-UNV. My system does see the device; dmesg says [ 82.718428] usb 2-2: new low speed USB device using ohci_hcd and address 2 [ 82.941189] usb 2-2: configuration #1 chosen from 1 choice [ 83.036825] usbcore: registered new driver

I just bought a pair of Belkin USB UPSes -- F6C1200-UNV and F6C550-AVR -- and installed the latest version of nut under Ubuntu 7.04. I'm using the F6C1200-UNV. My system does see the device; dmesg says [ 82.718428] usb 2-2: new low speed USB device using ohci_hcd and address 2 [ 82.941189] usb 2-2: configuration #1 chosen from 1 choice [ 83.036825] usbcore: registered new driver

2008/4/10, David Erosa <david.erosa at gmail.com>: > Public bug reported: > > Binary package hint: nut > > After updating to last nut package (2.2.1-2.1ubuntu6), the megatec_usb > driver seems to be working, except for the charge percentage: > > $ /lib/nut/megatec_usb -DDDDD -a SAI > ... > Checking device (0665/5161) (001/007) > - VendorID: 0665 >

Hello, all. Some time ago I bought myself a UPS which was advertised as USB-HID. It was a surprise to learn that while it definitely is recognized as USB device, the HID descriptor has no UPS pages at all. The only software it came with was a windows program written in visual basic. Trying to research this topic I found a reference to energizer USB ups driver and learned about variety of

Hi Jayson, 2008/1/11, Jayson Anderson <jayson.anderson at gmail.com>: > Greetings Arnaud, > > I'm sorry for taking up your time, but you are the primary POC for the NUT > project: > > I was just wondering if you know of any planned support for the Belkin > F6H550-UPS within the NUT project ? > > I am not a coder and as such, completely at the mercy of the

Hi, a few days ago, I bought some of those Mustek UPSes that have both a serial and a USB connector. Currently only the serial port is supported by the megatec driver. This works fine so far. Now I have seen there is a megatec_usb driver, which currently only supports 2 other UPSes. How can I help to find out whether the PowerMust might actually work with the megatec_usb driver? -- Regards,

Hi, Sorry for the forwarding. I sent this with the wrong "from" address and got rejected by the list. ---------- Forwarded message ---------- From: Carlos Rodrigues <cefrodrigues at mail.telepac.pt> Date: Jun 18, 2007 9:34 PM Subject: Re: Megatec - modem control lines [impact to megatec_usb] To: Arjen de Korte <nut+devel at de-korte.org> Cc: ups-dev-list <nut-upsdev at

Hi Alexander, thanks for your good work on the megatec_usb driver. I have made a few more (cosmetic) changes. Is the driver now working stably for your device? In particular, do the instant commands (and particularly "upsdrvctl -k") work properly? In this case, we could hopefully mark the device as "supported" and merge the driver to the main branch. There is still the