similar to: Centralion Blazer 2000VA USB-HID

So, I have this Mustek Powermust 600USB (no serial port) here temporarily. It seems to be a hid device. The output from "lsusb -v" and "newhidups -DDDDD" (with "generic" and "vendorid=06da") are (respectively): ----------------------------------------------------------------------------------------------- Bus 001 Device 002: ID 06da:0003 Phoenixtec Power

Hi, I bought a Belkin Active Battery Backup UPS (http://www.belkin.com/uk/activebattery/) yesterday with a USB port and hoped it would work with nut. The device will show up in /proc/bus/usb/devices as a Cypress Semiconductor USB to Serial. It creates /dev/hiddev0 (and this disappears when the UPS is unplugged). I've tried using belkin, belkinunv, usbhid-ups and megatec_usb. I've tried

Hello all, I am trying to set up my brother's UPS (remotely over internet) on an OpenIndiana-based storage box. According to him, the UPS is probably an Ippon Back Power Pro 600 dated around 2003 (battery recently replaced), and it has an USB connection. Sorry for a relatively long post with a log of my successes and failures, in the hopes that someone would point out what I did wrong.

Hi Rok, I retired from working on NUT a few months ago, so I don't have the most up-to-date info. But the guys on the nut-upsdev mailing list (cc'd above) are very helpful. Both of your devices (or nearly identical ones) have been seen on the mailing lists before. The Sweex was first mentioned in a message by Eli Wapniarski on 14 Jun 2006 on nut-upsuser, and was most recently discussed

I'm attempting to build some PECL modules on fully updated CentOS 4.2 system. Preferably pack them into nice RPM packages. However, seems I'm missing something. For example, this is what I get for sqlite module: $ pear makerpm SQLite-1.0.3.tgz `phpize' failed The php-devel package is installed (so I do have phpize command). It's just that it is failing. If I unpack the

On 5/23/07, Kjell Claesson <keyson-guest at alioth.debian.org> wrote: > Author: keyson-guest > Date: Wed May 23 21:12:51 2007 > New Revision: 915 > > Log: > - Enabled requested Alarm function in bcmxcp.c > > Modified: > trunk/ChangeLog > trunk/drivers/bcmxcp.c Looks like this breaks when HAL is enabled. At the end of:

I am converting a Debian box running Postfix, Courier and MySQL to a CentOS box running Postfix, Dovecot and MySQL. I have the Postfix with MySQL support taken care of with the RPM from the centosplus repo. It appears that the stock RPM for Dovecot comes with Postgres, but not MySQL support. It looks like I need to download the source RPM and then rebuild it with MySQL support. Could

I'm trying to follow docs/Projects.html to use llvm in a project of my own. If I just copy the sample directory, running configure in the new one works fine: ~/programming/llvm-1.9/projects $ cp -a sample/ zhe ~/programming/llvm-1.9/projects $ cd zhe/ ~/programming/llvm-1.9/projects/zhe $ ./configure configure: creating ./config.status config.status: creating Makefile.common config.status:

Hi, autoreconf -i -f which is called by autogen.sh gives these errors with git 31c9f0582260817777348c96a3576e5955f44ab3: rm at eurasia:~/swfdec/swfdec$ autoreconf -i -f /usr/share/aclocal/libmcrypt.m4:17: warning: underquoted definition of AM_PATH_LIBMCRYPT run info '(automake)Extending aclocal' or see http://sources.redhat.com/automake/automake.html#Extending%20aclocal

Hello Scott, On Wed, 2007-02-21 at 18:57 -0500, me22 wrote: > I'm trying to follow docs/Projects.html to use llvm in a project of my own. > > If I just copy the sample directory, running configure in the new one > works fine: > ~/programming/llvm-1.9/projects $ cp -a sample/ zhe > ~/programming/llvm-1.9/projects $ cd zhe/ > ~/programming/llvm-1.9/projects/zhe $

On 2/23/07, Reid Spencer <rspencer at reidspencer.com> wrote: > > However, if I run the AutoRegen.sh script (after modifying it to > > accept autoconf 2.61, which I think is fine as gentoo slots it the > > same as the 2.5[0-9] versions), the configure no longer works: > > ~/programming/llvm-1.9/projects/zhe $ cd autoconf/ > >

Hi, I'm trying to generate a skeleton driver with usbhid-ups and gen-usbhid-subdriver but the output seems to be incorrect. Same behavior with stable 2.6.5, so I guess there is something wrong with data coming out of device. I attached the output of usbhid-ups and gen-usbhid-subdriver from the commands: drivers/usbhid-ups -DD -u root -x explore -x vendorid=04d8 -a openups >&

[please keep the list CC'd. thanks!] On Mar 13, 2015, at 10:53 AM, Philip Taylor <philip at kelsotowers.co.uk> wrote: > I?ve set up UPSMON to simply execute ?shutdown -h now? and my system shuts down when I type ?upsmon -c fsd?. The problem is that the OpenUPS doesn?t shut down as a result; and therefore when the power comes back on, unless the battery has totally run out, the

Hi, I am just starting a new project. I found that the above script rejects Autoconf versions later than 2.59, whereas it ought to accept them, imho. I had to edit the scrip to be able to use it with Autoconf 2.61. Also, aclocal gave the following warning: /usr/share/aclocal/oaf.m4:4: warning: underquoted definition of AM_PATH_OAF /usr/share/aclocal/oaf.m4:4: run info '(automake)Extending

I?m a new user of NUT and the OpenUPS - in the past I?ve used APC hardware and apcupsd on Centos 6. I?ve built NUT 2.7.2 from source but used the OpenUPS HID driver v0.4 that?s in github. I?m using firmware version 1.5 on the openups which is the latest published version; I?ve also tried 1.7 which Mini-box sent to me but reverted to the published version. Their support seems a bit slow! I?ve got

After downloading libogg-1.1.tar.gz, libvorbis-1.0.1.tar.gz, and libtheora-1.0alpha3.tar.gz; building and installing them in that order, and trying the alpha3 theora encoder, I decided to try to build theora from svn. Using svn to checkout theoratrunk worked ok. The first time I tried to execute ./autogen.sh, it complained that I didn't have automake. Mandrake 10.0 comes with automake

On 11/9/2013 5:24 AM, Jim Klimov wrote: > Hello all, > > I am trying to set up my brother's UPS (remotely over internet) > on an OpenIndiana-based storage box. According to him, the UPS is > probably an Ippon Back Power Pro 600 dated around 2003 (battery > recently replaced), and it has an USB connection. > > Sorry for a relatively long post with a log of my successes

Reid, Thanks for the help. I am trying out the fixes you checked into CVS. I seem to be getting some errors running AutoRegen.sh. I am a bit inexperienced with autoconf and m4. The errors I'm getting are below. Do you know what the problem is? I am using machines running FC3. The autoconf version is 2.59, the aclocal version is 1.9.2, and the m4 version is 1.4.1.

On Mar 17, 2015, at 11:46 AM, Philip Taylor <philip at kelsotowers.co.uk> wrote: > Charles, > > Did you get chance to look at the data I sent you, please? > > I?ve done some more work myself and the conclusion I?ve reached is that if the minibus OpenUPS doesn?t support instant commands, then sending ?upsdrvctl shutdown? won?t ever work, as it would need to send instant

[I'm switching my dev address to @gmail.com instead of @mgeups... please, update your bookmark] Peter Selinger wrote: > > Arnaud Quette wrote: > > > > Here is the status of PSE (Peter Selinger) NUT patches > > for newhidups (hidparser, apc support, ...). > > > > - nut-cvs-patch-REOPEN-2005-08-24: > > approved and applied on Development tree > >