similar to: Re: INFOSEC 500 XP USB on Debian using nut

Bonjour, Je souheterais utilis? la version qui permet le '-x generic',mais je ne sais pas ou la recuperer car ca devrait solutionner mon probleme (cf mail ci-dessous) DaneZ _____ From: DaneZ [mailto:david.guillotte@danez.no-ip.org] To: arnaud.quette@mgeups.com Sent: Sat, 08 Jul 2006 23:24:06 +0200 Subject: Fw: INFOSEC 500 XP en USB _____ Bonjour Arnaud, Je me

Hello, I am trying to make my UPS system working with NUT but with no success. I got "No supported UPS detected" message. I use the blazer_usb driver since it was proposed to me by the web site. My NUT version is : 2.7.1 (installed from standard RPM), release 2.41 The UPS identification: INFOSEC X4 RM PLUS linux-2qya:~ # /usr/lib/ups/driver/blazer_usb -a infosec Network UPS Tools -

Hi I have an Infosec Hero touch lcd 400 USB ups but it is not recognised by Nut. I tried to use Blazer_usb too. Could you help me please ? Thank you very much! Https://www.infosec-ups.com/fr/#/dfclassic/query=Touch%20400&query_name=match_and -------------- next part -------------- An HTML attachment was scrubbed... URL:

I've download again nut source today from "https://github.com/networkupstools/nut/tree/voltronic-driver" and try compiliing the voltronic-driver. The drivers is working fine (ie computer is shutting down) except for the shutdown of the ups. I can shutdown the ups by sending the command "shutdown.return" but standard shutdown doesn't work. upsmon -K return: kill: No

Dear list, I'm proud to report that the megatec driver supports the following devices: Infosec XP Pro 1000 Kebo 1200D 'D Series' Thanks for such great software! Cheers, Tamas Csillag

Hello, I'm sorry if i'm not sending to the good email adress, please transfer this mail to the good one if necessary... I have tested and run the driver named "blazerd_usb" with differents products from the infosec company (tested on the following UPS : X2, X3, X4, E2, E3, E4) Is it possible to add the to the Hardware compatibility list ? Thank you, Regarde, Jeremy

Hi, Sorry for my poor english but it isn?t my native language. I?m testing an infosec E4 with nut-2.6.4-2.3 on Proxmox ve 3.0 (based on debian wheezy). The drivers that match this ups, is blazer_usb. Btw, I have try nut-2.6.5 with unstable repository from wheezy, but it still doesn?t fully work. I can shutdown my computer when battery is low, but unfortunately I can?t shutdown ups. Like said on

Great, it's working fine. I'm using upssched to shutdown computer after 15mn when on battery. Should I trigger "upsmon -c fsd" with my script? I mean, is it the normal way to shutdown both computer and ups. Best regards, -----Message d'origine----- From: Charles Lepple Sent: Monday, August 26, 2013 3:07 AM To: James HORLEY Cc: nut-upsuser list Subject: Re: [Nut-upsuser]

I compile nut with the voltronic-driver on my computer then I've copy the driver "/lib/nut/voltronic_ser" on the server. I can now shutdown the ups using "upscmd -u admin myups shutdown.return". My first question is, is it really ok to only take the driver whithout taking the whole package? I'm using upssched to shutdown server after 15mn on battery, the

Ubuntu 8.04 Nut : Version: 2.2.1-2.1ubuntu7.2 Hello, I choose the megatec driver and I connect through a serial cable. I receive a "This UPS has an unsupported combination of battery voltage/number of batteries" message. I know this is not an error but I don't really what I have to do next. Here is the result of /lib/nut/megatec -a infosec -DDD debug level is '3'

I?m wondering if what I have done is good : # get the source from github on my computer # autogen.sh # name=nut # ./configure --prefix=/ --sysconfdir=/etc/$name --mandir=/usr/share/man --libdir=/usr/lib --includedir=/usr/include --datadir=/usr/share/$name --with-statepath=/var/run/nut --with-altpidpath=/var/run/nut --with-drvpath=/lib/nut --with-pidpath=/var/run/$name

I'm pretty sure, I've install pkg-config, but I will check it monday after my holliday. This is my test steps: - Shutting down nut-client (upsmon) - Only nut-server (driver + upsd) is running - upsmon.conf have been revert to normal shutdown, no upssched - upsc myups return ups stats then: upsmon -K -DDDDD, here is the output: kill: No such process UPS: myups at

Hi everybody, In a christmas sequel I've been offered one of the units mentioned above. I've tried to connect it to my Fedora 8 workstation but rapidly concluded it's not yet supported by NUT. So far, I've decompiled the Java classes of the manufacturer's application and noticed that it's most probably yet another kind of serial protocol through the USB. Since

I was hoping someone could either help me or point me in the direction of a resource. I have searched the web for any howto on repairing a failed array, but keep coming up short. I have a home file server running a RAID 5 array that now will not mount my array. I believe it is telling me there is a problem with the second drive. The basics: RedHat 8.0 kernel 2.4.20-28.8 don't know the

InfoSec World(tm) Conference and Expo 2006 April 3-5, 2006 Vendor Expo: April 3 & 4 Optional Workshops: April 1, 2, 5, 6, & 7 Disney's Coronado Springs Resort / Orlando, FL http://www.misti.com/InfoSecWorld SPECIAL OFFER! SECNAP Network Security Corp. and MIS Training Institute would like to offer you 10% OFF of the regular undiscounted conference fee of $1495 to attend

On Aug 26, 2013, at 6:22 AM, James HORLEY wrote: > I've download again nut source today from "https://github.com/networkupstools/nut/tree/voltronic-driver" and try compiliing the voltronic-driver. This branch has been merged in, and will be part of 2.7.1 when it is released. > The drivers is working fine (ie computer is shutting down) except for the shutdown of the ups. >

On Jul 29, 2013, at 7:12 AM, James HORLEY wrote: > There?s a software advised by the constructor that work on linux (http://www.power-software-download.com/viewpower.html), unfortunately it?s heavy (tomcat and java) and I don?t find it as flexible as NUT. We have a development branch called "voltronic-driver" which might work better than the blazer* for UPS models which are meant to

On Sep 3, 2013, at 8:16 AM, Goslawski, Dawid (NSN - PL/Wroclaw) wrote: > Oh, so this means that FCD will really send shutdown command to ups (so turn off working on battery) or only to upsmon ? I will also use upssched cause our systems need approx 15min to shutdown gracefully and I want to know how to properly do it. I don't use upssched myself, I'm just pointing out the relevant

On Aug 1, 2013, at 8:15 AM, Charles Lepple wrote: > On Jul 29, 2013, at 7:12 AM, James HORLEY wrote: > >> There?s a software advised by the constructor that work on linux (http://www.power-software-download.com/viewpower.html), unfortunately it?s heavy (tomcat and java) and I don?t find it as flexible as NUT. > > We have a development branch called "voltronic-driver"

On Jul 31, 2013, at 9:07 AM, James HORLEY wrote: > I?m wondering if what I have done is good : > # get the source from github on my computer > # autogen.sh > # name=nut > # ./configure --prefix=/ --sysconfdir=/etc/$name --mandir=/usr/share/man > --libdir=/usr/lib --includedir=/usr/include --datadir=/usr/share/$name > --with-statepath=/var/run/nut