similar to: bcmxcp: get right firmware version

corrupted checksums happen all the time with the 6-port serial card, even when only using one port (and I don't give a shit about the other ports, if anybody has a one-port laying around...) so stop whining already. $OpenBSD$ --- drivers/bcmxcp_ser.c.orig Wed Aug 23 11:15:54 2006 +++ drivers/bcmxcp_ser.c Wed Aug 23 11:26:37 2006 @@ -168,8 +168,8 @@ int get_answer(unsigned char *data, unsi

Hi Inspired by the changes by Prachi Gandhi to use the command map from the UPS in the bcmxcp driver, I think the map should be used, if available, to control all commands the driver adds using "dstate_addcmd". The following patch is an attempt at doing so. The patch is against the bcmxcp branch. Since my UPS also supports : #define PW_UPS_ON (unsigned char)0x89 /* UPS on

Hi Here is a very minor patch for the bcmxcp.c driver, mainly fixing the function name used in debug statement, and at the same time fix indentation. Regards Alf Hogemark From 86c7940d0ea11b5b38a7f4518095ee2428d658c7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Alf=20H=C3=B8gemark?= <alf at i100.no> Date: Mon, 1 Jul 2013 21:11:40 +0200 Subject: [PATCH] bcmxcp: Fix method name outputted in

* Henning Brauer <hb-nut at bsws.de> [2014-09-20 13:39]: > * Charles Lepple <clepple at gmail.com> [2014-09-20 01:12]: > > On Sep 19, 2014, at 5:18 PM, Stan Gammons <sg063015 at gmail.com> wrote: > > > Looks like this patch fixed the problem. I see the status change now. > > Good to hear. > > I'm not familiar with the OpenBSD release process. Is

* Charles Lepple <clepple at gmail.com> [2014-09-20 01:12]: > On Sep 19, 2014, at 5:18 PM, Stan Gammons <sg063015 at gmail.com> wrote: > > Looks like this patch fixed the problem. I see the status change now. > Good to hear. > I'm not familiar with the OpenBSD release process. Is that patch on track to be a part of the final 5.6 release? no, 5.6 is already cut.

good new first: the megatec driverin 2.0.5 now works with the Online Xanto S3000R here - well, for the very basics. the UPS has NO way ofidentifying itself. It also does not respond to the power ratings query ("F"). I previously used a hacked up fentonups driver. This means the driver cannot figure out the battery voltage and thus no battery charge level, which is a problem in our

I ran into a portability issue with drivers/bcmxcp.c in nut-2.4.1 on my UnixWare 7.1.4 machine. The error I get is ..... UX:acomp: ERROR: "/opt/src/utils/nut-2.4.1/drivers/bcmxcp.c", line 835: integral constant expression expected ..... Looking at the code we see ..... int init_outlet(unsigned char len) { unsigned char answer[len]; ..... Although gcc can handle it, it's not

On Sep 23, 2014, at 3:55 AM, Henning Brauer <hb-nut at bsws.de> wrote: > We have upd(4) attaching to these devices now. Either nut needs a > driver getting status from upd (trivial, will show up in the > hw.sensors sysctl tree) or we need some way for nut still being able > to talk to the ups directly, without upd and nut interfering with each > other. While a upd(4) driver

On Jul 2, 2013, at 5:16 PM, Kjell Claesson wrote: >> I hope other people can also test this. >> >> Regards >> Alf Hogemark > > Due to some crashes on the disks and lack of time I don't have the git on the > pc now. But maybe some other can commit this. I'd like to ask people to specifically try the bcmxcp branch on GitHub - it includes some changes

Greetings, I've just installed nut-2.4.1 on a Solaris 10 x86 machine to monitor a HP R3000XR UPS. SunOS babylon4 5.10 Generic_138889-08 i86pc i386 i86pc Solaris First of all, I encountered a single problem during the build. After configuring, drivers/Makefile ends up containing the following line: LIBNETSNMP_LDFLAGS = -R../lib -L/usr/sfw/lib -lnetsnmp -lgen [...] This is clearly

Network UPS Tools version 2.0.5 has been released. http://www.networkupstools.org/ Direct access: - Download: http://www.networkupstools.org/source/2.0/nut-2.0.5.tar.gz - News: http://www.networkupstools.org/source/2.0/new-2.0.5.txt - ChangeLog: http://www.networkupstools.org/source/2.0/ChangeLog

Network UPS Tools version 2.0.5 has been released. http://www.networkupstools.org/ Direct access: - Download: http://www.networkupstools.org/source/2.0/nut-2.0.5.tar.gz - News: http://www.networkupstools.org/source/2.0/new-2.0.5.txt - ChangeLog: http://www.networkupstools.org/source/2.0/ChangeLog

Hi Henning, you should get in touch with Carlos, who his developing a generic megatec driver (available from svn: http://eu1.networkupstools.org/source.html) Arnaud -- Linux / Unix Expert - MGE UPS SYSTEMS - R&D Dpt Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer - http://people.debian.org/~aquette/ OpenSource Developer -

Hi Yesterday I had 2 different APC UPS using USB get in power off recoverable state. dmesg said: 7705944.352083] usb 2-1: new low speed USB device using uhci_hcd and address 2 [7705944.477061] usb 2-1: device descriptor read/64, error -71 [7705944.709035] usb 2-1: device descriptor read/64, error -71 [7705944.925071] usb 2-1: new low speed USB device using uhci_hcd and address 3

Hi, I have an HP R5500XR and a Compaq R3000XR that I would like to use with nut. I searched the compatibility lists and the mail list archives but couldn't find anything. They both have 9 pin serial ports. Can anyone give me any information about them, and if they are supported by nut? Thanks, Denny Fox

Hello there. I use Online Xanto ups'es so I did some googling for their support in nut. Turns out that... - networkupstools.org talks about an 'optiups' driver in the development version (http://www.networkupstools.org/compat/dev.html - by the way, the web page says 'stable' in the title and headings just like the actual stable one) - Andreas Thienemann seems to have a

On 07/08/2013, at 13.40, Jan Phillip Greimann <jg at softjury.de> wrote: > Hi there, > > OS: (L)ubuntu 12.04 precise LTS > Nut: 2.6.3-1ubuntu1.1 > Installation Method: Package (apt-get install nut) > Hardware: HP R1500 G3 INT FYI: I have a different UPS, a HP R3000 XR and I monitor it using serial and the bcmxcp driver. [R3000XR] port = /dev/ttyUSB0 driver =

On 1/23/07, Henning Brauer <hb-nut@bsws.de> wrote: > good new first: the megatec driverin 2.0.5 now works with the Online > Xanto S3000R here - well, for the very basics. > > the UPS has NO way ofidentifying itself. It also does not respond to > the power ratings query ("F"). I previously used a hacked up fentonups > driver. This means the driver cannot figure out

Hi All, I am using Speex for encoding/decoding the audio stream for my streaming application. I have used almost the same code In the sampleenc.c and sampledec.c, except that I have used The buffers from the mic as input for encoder and encoded audio As input for decoder, instead of files input. My Problem is the audio played on the receiving side after decoding Is only a "hush" or it

On 08/08/2013, at 18.58, Alf H?gemark <alf at i100.no> wrote: > On 08/07/2013 02:02 PM, Bendtsen, Jon wrote: >> On 07/08/2013, at 13.40, Jan Phillip Greimann <jg at softjury.de> wrote: >> >>> Hi there, >>> >>> OS: (L)ubuntu 12.04 precise LTS >>> Nut: 2.6.3-1ubuntu1.1 >>> Installation Method: Package (apt-get install nut)