similar to: Gathering information : drivers and UPS infos

Hello ups-dev Arnaud asked me to add a function upsdrv_print_ups_list the drivers upsdrv_print_ups_list : why This function would print the vendorId and the productId of the UPS supported by the driver (for USB driver at least). It could then be parsed by a tool (that I'll have to make too), whose the goal would be to automagically generate 4 sort of file : - fdi file for HAL - udev rules

Have had no issue until I ran apt-get dist-upgrade this morning: # /lib/nut/newhidups -u nut -DDDDDD auto Network UPS Tools: 0.28 USB communication driver 0.28 - core 0.30 (2.0.5) debug level is '6' Checking device (0000/0000) (001/001) - VendorID: 0000 - ProductID: 0000 - Manufacturer: unknown - Product: unknown - Serial Number: unknown - Bus: 001 Trying to match device Device does not

I have changed over to CentOS5 on some of our computers. I had been using Mandriva 2006 and the nut software worked using: driver = newhidups port = auto Using the same version of nut with the same config files on CentOS5, I get the following error output from 'upsdrvctl': Network UPS Tools - UPS driver controller 2.0.4 Network UPS Tools: New USB/HID UPS driver 0.28 (2.0.4) No

I have changed over to CentOS5 on some of our computers. I had been using Mandriva 2006 and the nut software worked using: driver = newhidups port = auto Using the same version of nut with the same config files on CentOS5, I get the following error output from 'upsdrvctl': Network UPS Tools - UPS driver controller 2.0.4 Network UPS Tools: New USB/HID UPS driver 0.28 (2.0.4) No

Hi Patrick, in February, you tried to post the below message to the nut-upsuser list, but the post was rejected because you were not subscribed to the list. Unfortunately, you did not subscribe and re-post it. Anyway, I have been working on Tripp-Lite support for newhidups recently, and I wonder if you have any feedback. Did you ever get this device to work? >From the information you sent,

I have a Belkin F6H500ukUNV ups that I am attempting to get working under nut, however it does not appear to be detected by nut, I'm assuming that I need to feed some information back to you guys to get it included in the database somwhere. I've included (what I can think might be) the relivant outputs. Please let me know if you require anything else. dmesg output /sbin/newhidsups

Just wanted to report that I have successfully got a Dynex DX-800U UPS functioning with the newhidups driver. This UPS appears to be made by CyberPower Systems and I believe is the same as the CPS 800AVR. --------- # upsc dynex@localhost battery.charge: 66 battery.charge.low: 10 battery.charge.warning: 20 battery.runtime: 399 battery.runtime.low: 300 battery.type: PbAcid battery.voltage: 19.7

Hello, I'm using the stable amd64 port of Debian Linux. I installed (the latest) nut-2.0.1-4 and nut-usb packages for utilizing an APC Smart-UPS 1500 USB. I tried "apcupsd" first but "nut" makes an even more sophisticated impression on me and has more security options. I had problems with the newhidups driver. It didn't find a device with matching VendorID. And

Hi Scott, Scott Alfter wrote: > I had a UPS go bad recently (shuts off all by itself for no good reason, >AFAICT), so I bought a CyberPower 685AVR this afternoon. The two CyberPower >drivers in NUT 2.0.2 don't know how to talk to it, but the hidups driver >appears to work properly. This means you have to use USB instead of RS-232 (it >supports both), but at least it works. >

Hi everybody, If we let the feature running, it appears that the driver gets unbound after a while ( variable from quarter of hour to 6 hours ) and cannot reconnect. This behavior appear with both MGE Ellipse ASR and non-ASR models with connection to an UHCI and OHCI controllers. The USB core is from 2.4.28 kernel. We use nut-2.0.3. Start, powerfail and recovery detections, UPS shutdown work

Hello world; been using nut atop Debian GNU/Linux (sid) for about two years by now, my configuration broke as I upgraded the machine this morning (headin' for kernel 2.6 to have full support for the new GBE NIC included). I read through the UPGRADE.gz instructions provided with the Debian packages and tried to fix things according to the instructions pointed out there, but things still just

Mr. Selinger, I'm CCing you directly since it appears (insofar as I can tell) that you are one of the delelopers for the newhidups driver. This is the third time I've submitted this (hence the CC this time). Hopefully mailman takes it. I've tweaked my SPF records, and I'm hoping that was the problem. My sincere apologies if this has gone through and I just haven't seen it

Hi, I am new to this list, so I apologize if I make any mistakes in posting. I am trying to set up nut with my Tripp Lite SMART 1200LCD. I looked on the compatability page, and some Tripp Lite models were supported, so I decided to try out mine. I have tried both USB and serial connections, and neither have worked. I am just wondering if this is a problem with nut supporting my model, or

Hi Arnaud, hi all I wish you all the best for 2006. Enjoying of some less stressed time, I follow your advice, Arnaud, to switch our UPS management on the newhidups driver. ( Enfin ! ;) Our goal is to support (soon) the new MGE ASR ELLIPSE ( and of course also the old ELLIPSE and EXTREME models ). I rebuild the libusb-0.1.10a packages to conform to our installation process. I perform the same

Hello everybody, After succeeded in "tuning" nut-2.0.0's hidups and 2.0.3's newhidups on customized Linux kernels, we are now facing a new challenge : trying to install nut-2.0.5 on a RedHat ES4 which is based on a 2.6.9 kernel. I picked up the 2.0.5 source package and follow the INSTALL doc until step 6. So far so good. RH ES4 is managed by udev, therefore I presume we

Hi, it'd be great if you could update the documentation on the website that some models of the Belkin -UNV series will only work with the megatec(_usb) drivers. I wasted a lot of time on trying to get it to work with the wrong drivers, and would like to spare others the pain :-). Thanks, ~David P.S. Some forum post said that the stable megatec drivers don't work 100% with the belkin UPS,

Hi, it'd be great if you could update the documentation on the website that some models of the Belkin -UNV series will only work with the megatec(_usb) drivers. I wasted a lot of time on trying to get it to work with the wrong drivers, and would like to spare others the pain :-). Thanks, ~David P.S. Some forum post said that the stable megatec drivers don't work 100% with the belkin UPS,

I just moved my UPS over from serial to USB and found that I needed to add it to the hotplug USB list to make things work. Belkin F6C120-UNV - Bus 002 Device 004: ID 050d:0912 Belkin Components It seems to be working OK on 2.0.4 with newhidups. Attached is a patch which I think should add the appropriate device id's in the right places to the trunk code. Jon -------------- next part

Hello, Help me please with *newhidups* setup. Does it work for someone on *BSD ? Here is the data. --------------------------------------------------------------- *** FreeBSD root.srv# uname -a FreeBSD xxxxxx.dyndns.info 5.3-RELEASE FreeBSD 5.3-RELEASE #2: Tue Feb 8 07:38:22 UTC 2005 admin@temp.botka.homeunix.org:/usr/src/sys/i386/compile/SRV i386 *** NUT ver.2.0.3 root.srv# ll /var/db/pkg/

We are interested in using Nut on our Federa 6.0 servers. However, our UPS systems are sold under the name "Geek Squad" (sold through the Best Buy chain of department stores). I'm pretty certain Geek Squad does not manufacture these units and they just rebrand them. Does anyone know who makes these units or what they are compatible with in terms of driver level protocol? The ones we