similar to: fentonups: add Lestar MD-800E

On 2016-06-01 20:07, Kelly Lesperance wrote: > Software RAID 10. Servers are HP DL380 Gen 8s, with 12x4 TB 7200 RPM drives. > > On 2016-06-01, 3:52 PM, "centos-bounces at centos.org on behalf of m.roth at 5-cent.us" <centos-bounces at centos.org on behalf of m.roth at 5-cent.us> wrote: > > >Kelly Lesperance wrote: > >> I did some additional testing - I

Apologies, I think the gem attachment may have been stripped from my original mail, so I''ve uploaded it to rubyforge under a new ''wxextra''s project: http://rubyforge.org/projects/wxextras/ (direct link: http://rubyforge.org/frs/download.php/19183/nobbie-wx-preview-0.0.1.gem) p. ============================================================ Before I forget, thanks

Hi list here is the patch to make fentonups recognize some PowerCOM's UPS's, and to setup terminal lines for them (at least for SMK-1500a) as powercom's original upsmon do. fentonups -x powercom works correctly with SMK-1500a (it screamed ''Communications with UPS lost - check cabling' or 'Short read during UPS id sequence' without this patch). Sorry for

Hi Patrick, 2006/4/2, Patrick Beard <p.beard@blueyonder.co.uk>: > Hi Arnaud, > > Just wanted to let you know the the Belkin F6H500ukUNV is working for me > with the fentonups driver. > > http://catalog.belkin.com/IWCatSectionView.process?IWAction=Load&Merchant_Id=&Section_Id=202840 > > I originally tried it with the genericups driver with upstype=7 but this

Do you know some piece of code I could look at to see learn more about this ?

Do you know some piece of code I could look at to see learn more about this ?

Hi there, A couple years ago, I had patched the "fentonups" nut driver to allow it to work with my Unitek Alpha 500 UPS. My patch had been accepted and incorporated in the standard fentonups driver. I have had no time to stay involved in the "nut" project since (and besides this I'm not a developper...). 2 days ago I upgraded from Ubuntu Gutsy to Ubuntu Hardy and got

>> I tested it by pulling the supply to the ups. It got the 'on and then >> the 'low battery' upsmon then shutdown my system. The ups however >> remained on. >the ups shutoff (hardware ups shutdown) seems not to be working. >Carlos might have more ideas on the cause... This might not be a bug - it could be that I reconnected the supply to soon. I say this

Greetings, I've just installed nut-2.4.1 on a Solaris 10 x86 machine to monitor a HP R3000XR UPS. SunOS babylon4 5.10 Generic_138889-08 i86pc i386 i86pc Solaris First of all, I encountered a single problem during the build. After configuring, drivers/Makefile ends up containing the following line: LIBNETSNMP_LDFLAGS = -R../lib -L/usr/sfw/lib -lnetsnmp -lgen [...] This is clearly

After trying the 'powermust' driver I can confirm it works well with the F6H500ukUNV ups from Belkin. I reported my tests but by accident posted them directly to Carlos and not the mailing list (sorry Carlos). Anyway brief summary of the powermust driver with the F6H500ukUNV; Detects Online state. Reports the Battery charge correctly. Detects On Battery State. Detects Low Battery State.

Hi Stefanos, you should mail to the NUT list, and try the megatec driver, which is only available from subversion for the moment (but should be included in the next stable release). Carlos might give you some help with this driver. Arnaud Quette -- Linux / Unix Expert - MGE UPS SYSTEMS - R&D Dpt Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer -

Hi Henning, you should get in touch with Carlos, who his developing a generic megatec driver (available from svn: http://eu1.networkupstools.org/source.html) Arnaud -- Linux / Unix Expert - MGE UPS SYSTEMS - R&D Dpt Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer - http://people.debian.org/~aquette/ OpenSource Developer -

Hi ups-devel, As I looked throw www.networkupstools.org site, haven't found any pointers where to send patches, so I hope this is the right place. (Please let me know weather this is the right place.) The patch contains a minor change in the logic of the driver, our Effekta MHD 3000 UPS continuously writes status data to the serial port, so one has to send a CR character and empty the

I am a noobie to wine. I have just install .59 version. My question is how do I go about uninstalling Games that do not work? I looked at the WIKI and it said something about uninstaller, but I am either dense or it isn't nobbie friendly. Is there something like add/remove like in Windows Control Panel? For instance, I have installed Icewind dale on 2 computers. One installation is good and

another attempt: # upsd Network UPS Tools upsd 2.6.5 fopen /var/db/nut/upsd.pid: No such file or directory listening on 127.0.0.1 port 3493 listening on ::1 port 3493 Can't connect to UPS [senpro] (riello_ser-senpro): No such file or directory # ls -la /var/db/nut/ total 12 drwx------ 2 _ups wheel 512 Jul 30 10:22 . drwxr-xr-x 10 root wheel 512 Jul 29 16:41 .. -rw-r--r-- 1 _ups

Here is what I did: # cd /root/nut/ # nut here it's checkouted repository # ./configure --with-user=_ups --with-group=_ups # cd drivers/ # make riello_ser # chgrp bin riello_ser # cp riello_ser /usr/local/bin # here I copied builder driver to folder where nut-package will store their files/drivers # pkg_add nut-2.6.5p1 # ls -la /dev/tty00 crw-rw---- 1 _ups _ups 8, 0 Jul 30

# reboot Connection to 192.168.5.81 closed by remote host. Connection to 192.168.5.81 closed. ppo at admin:/tmp$ ssh root at 192.168.5.81 root at 192.168.5.81's password: Last login: Tue Jul 30 14:10:49 2013 from pc-ppo.kh.ektos OpenBSD 5.3 (GENERIC.MP) #58: Tue Mar 12 18:43:53 MDT 2013 # ps -aux | grep ups root 2254 0.0 0.0 324 700 p0 S+ 5:29PM 0:00.00 grep ups # ps -aux

Hello again! Thanks to the precious help from Henning Brauer, I managed to solve an issue with my UPS (a rebranded UPS speaking in Ablerex-ese over USB). Under OpenBSD 4.3, the UPS was claimed by HID. Now that I recompiled the kernel, adding a USB_quirk, this is what I get when I insert the USB cable: ugen0 at uhub0 port 2 "UIS_ABLER USB to Serial" rev 1.00/1.00 addr 2 So far, so

This is not a NUT question per se ... or at least, I don't think it is. I just replaced the battery pack in my HP R3000XR; the new batteries were shipped with 90% charge, were at about 87% when they went in, and were up to 98% charge the next day. Last weekend, the server that runs NUT went down for no apparent reason, wiping out its boot blocks, corrupting its boot archive beyond

I'm running nut 2.0.1 with an MGE pulsar evolution 3000 with the mge-utalk (serial) driver on NetBSD 3.1 . I had a very strange occurance in my basement datacenter this early AM. the following was logged by upslog: 20080219 023452 100.0 123.0 049.0 [OL CHRG] NA 60.00 20080219 023522 100.0 122.8 049.0 [OL CHRG] NA 60.00 20080219 023552 098.0 123.0 049.0 [OL DISCHRG] NA 60.00 20080219 023622