similar to: [PATCH] fentonups patch to make it work with some powercom ups's

Carlos, Today I was browsing through the NUT Tracker and noticed an entry which linked to a message on nut-upsdev: http://lists.alioth.debian.org/pipermail/nut-upsdev/2006-January/000559.html Although the fentonups driver is no longer in the tree (since it was replaced by the megatec driver), I think there is still some merit in this patch. Notice the following lines from this message: >

Hi ups-devel, As I looked throw www.networkupstools.org site, haven't found any pointers where to send patches, so I hope this is the right place. (Please let me know weather this is the right place.) The patch contains a minor change in the logic of the driver, our Effekta MHD 3000 UPS continuously writes status data to the serial port, so one has to send a CR character and empty the

G'day. I have a UPS here that is driven by the Fenton UPS driver, and which requests that I report the ID string to the NUT developers: root@anu:~# upsdrvctl start smk800 Network UPS Tools - UPS driver controller 2.0.4 Network UPS Tools - Fenton UPS driver 1.22 (2.0.4) Unknown ups - please report this ID string: #M+H SMK-800 2000 V6.2 Detected Unknown MK-800 on /dev/ttyS0 The

Hi! I've tried the Fenton Driver for my UPS. The Powercom driver doesn't work. Here is the results: Network UPS Tools - UPS driver controller 2.0.0 Network UPS Tools - Fenton UPS driver 1.21 (2.0.0) Unknown ups - please report this ID string: #PCM SMK-1000 2001 V9.0 Detected Unknown MK-1000 on /dev/ttyS0 Have you any ideas to make it compartible with NUT. Thanks! With

Hello, The following code is expected to produce 4 charts. But, I only get charts 1,2 ,& 4, NOT CHART # 3. For Chart# 3, I am getting the following error message: Error in tapply(1:NROW(x), list(factor(strata)), function(index) { : arguments must have same length I would appreciate if someone could help me resolve the issue. Thanks, Pradip # BELOW IS THE REPRODUCIBLE EXAMPLE setwd

Hi Patrick, 2006/4/2, Patrick Beard <p.beard@blueyonder.co.uk>: > Hi Arnaud, > > Just wanted to let you know the the Belkin F6H500ukUNV is working for me > with the fentonups driver. > > http://catalog.belkin.com/IWCatSectionView.process?IWAction=Load&Merchant_Id=&Section_Id=202840 > > I originally tried it with the genericups driver with upstype=7 but this

Do you know some piece of code I could look at to see learn more about this ?

Do you know some piece of code I could look at to see learn more about this ?

Hi there, A couple years ago, I had patched the "fentonups" nut driver to allow it to work with my Unitek Alpha 500 UPS. My patch had been accepted and incorporated in the standard fentonups driver. I have had no time to stay involved in the "nut" project since (and besides this I'm not a developper...). 2 days ago I upgraded from Ubuntu Gutsy to Ubuntu Hardy and got

Hi Marek, thanks for your report, forwarded to the dev list, and logged in the patch tracker: https://alioth.debian.org/tracker/index.php?func=detail&aid=303209&group_id=30602&atid=411544 thanks to also post back the ID string inside double quote to validate the exact string (use my present gmail address if you don't want to subscribe to upsdev). Arnaud -- Linux / Unix Expert -

>> I tested it by pulling the supply to the ups. It got the 'on and then >> the 'low battery' upsmon then shutdown my system. The ups however >> remained on. >the ups shutoff (hardware ups shutdown) seems not to be working. >Carlos might have more ideas on the cause... This might not be a bug - it could be that I reconnected the supply to soon. I say this

hey guys I finally got starcraft working (only took about two hrs, not bad) anyways I've played though it a bit and I get the first cinematic but I'm dropped back to X with this message "Starcraft was unable to open a required file, if the problem persists reinstall blah blah blah" the thing is it's trying to open PreTerran_1.smk in the smk folder.......but I don't have

After trying the 'powermust' driver I can confirm it works well with the F6H500ukUNV ups from Belkin. I reported my tests but by accident posted them directly to Carlos and not the mailing list (sorry Carlos). Anyway brief summary of the powermust driver with the F6H500ukUNV; Detects Online state. Reports the Battery charge correctly. Detects On Battery State. Detects Low Battery State.

Hi Stefanos, you should mail to the NUT list, and try the megatec driver, which is only available from subversion for the moment (but should be included in the next stable release). Carlos might give you some help with this driver. Arnaud Quette -- Linux / Unix Expert - MGE UPS SYSTEMS - R&D Dpt Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer -

Hi Henning, you should get in touch with Carlos, who his developing a generic megatec driver (available from svn: http://eu1.networkupstools.org/source.html) Arnaud -- Linux / Unix Expert - MGE UPS SYSTEMS - R&D Dpt Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer - http://people.debian.org/~aquette/ OpenSource Developer -

Here are another three problems with logarithmic scales: 1) segments() does not work with logarithmic scales. I suggest to change lines 962-973 in "plot.c": for (i = 0; i < n; i++) { if (FINITE(xt(x0[i%nx0])) && FINITE(yt(y0[i%ny0])) && FINITE(xt(x1[i%nx1])) && FINITE(yt(y1[i%ny1]))) { GP->col = INTEGER(col)[i % ncol];

Hi All! I have a traoble whith my ups, - megatec driver can not calculating % of charging and voltage on battery: # uname -a FreeBSD backup.*.*.* 8.1-RELEASE FreeBSD 8.1-RELEASE #0: Wed Sep 22 12:25:01 EEST 2010 ups.conf [Powercom] driver = megatec port = /dev/cuau0 #battvolts=12:24 desc = "powercom sxl-1000A" # ./nut start Network UPS Tools - UPS driver controller 2.4.1

Hello again, I have a Sola 305 (aka Powerware 3110) here connected via a serial INT-0051 cable which I am trying to get working with nut. The driver.list file indicates that nut supports the Sola 305 when connected via the INT-0025C cable using the genericups driver with upstype set to 7 but it does not mention the INT-0051. I was able to use the "Basic CheckUPS II" utility provided

R-users & helpers: I am using Amelia, mitools and cmprsk to fit cumulative incidence curves to multiply imputed datasets. The error message that I get "Error in eval(expr, envir, enclos) : invalid 'envir' argument" occurs when I try to fit models to the 50 imputed datasets using the "with.imputationList" function of mitools. The problem seems to occur

Hi *Simon, i got a similar setup here (also a powercom-oem-product, but in my case labeled by a swiss "manufacturer") with the same problems, using powercom's upsmon works fine, while nut completely refuses to cooperate. after trying almost everything i somehow hopeless surfed on the official nut-page, when i saw that there are powercom-products which don't need the