Displaying 20 results from an estimated 400 matches similar to: "Re: [Nut-upsuser] Atlantis-Land UPS with Cypress CY7C63723 chip"
2005 Dec 13
0
Re: [Nut-upsuser] Atlantis-Land UPS with Cypress CY7C63723 chip
[please keep the list CC'd]
On 12/13/05, ngpost1 <ngpost1@etitech.net> wrote:
> Charles,
>
> Another question:
>
> When I ran the newhidups -DD.... test, there apparently was no
> communication with the UPS. Since I assume is talks with the Megatec
> protocol, I wanted to force the protocol in the command line.
As far as I know (and I am no expert on
2005 Dec 07
5
Atlantis-Land UPS with Cypress CY7C63723 chip (cypress_m8 driver) support
Hello everybody!
I am trying to get an Atlantis-Land OnePower Line Interactive S1501
UPS (actually it is made by Ablerex) to talt to my Linux box through its
USB port (no more RS-232...), either using the supplied program
(UPSilon2000, works under Win and Linux) or whatever else.
The UPSilon2000 program apparently works OK *if* it can talk to the
UPS via a serial port; since my UPS has
2005 Dec 07
5
Atlantis-Land UPS with Cypress CY7C63723 chip (cypress_m8 driver) support
Hello everybody!
I am trying to get an Atlantis-Land OnePower Line Interactive S1501
UPS (actually it is made by Ablerex) to talt to my Linux box through its
USB port (no more RS-232...), either using the supplied program
(UPSilon2000, works under Win and Linux) or whatever else.
The UPSilon2000 program apparently works OK *if* it can talk to the
UPS via a serial port; since my UPS has
2013 Jun 11
0
[HCL] Atlantis Land A03-P551(V1.2) supported by <blazer_usb>
Atlantis Land A03-P551(V1.2)
battery.charge: 100
battery.voltage: 13.70
battery.voltage.high: 13.00
battery.voltage.low: 10.40
battery.voltage.nominal: 12.0
device.mfr:
device.model:
device.type: ups
driver.name: blazer_usb
driver.parameter.langid_fix: 0x0409
driver.parameter.pollinterval: 2
driver.parameter.port: x
driver.version: 2.6.4
driver.version.internal: 0.08
input.current.nominal: 0.0
2015 Oct 06
0
No power cycle after shutdown on Atlantis Land OnePower A03-S1001
On Oct 2, 2015, at 9:01 PM, Davide Baldini <baldiniebaldini at gmail.com> wrote:
>
> When I manually unplug the mains, the computer waits 3 minutes, shutdowns, and there it stays. As per the above commands, issued from ups_events.sh, it is instead supposed to boot up after 6 minutes (360 / 60 seconds) counted from t?, the moment of the unplug. After 20 seconds from the shutdown, and
2015 Oct 13
0
No power cycle after shutdown on Atlantis Land OnePower A03-S1001
Guess I can assume that my OnePower A03-S1001 just doesn't support the shutdown
command. Might this be the case?
-- Davide
2015 Oct 13
2
No power cycle after shutdown on Atlantis Land OnePower A03-S1001
On Tue, 13 Oct 2015, Davide Baldini wrote:
> Guess I can assume that my OnePower A03-S1001 just doesn't support the
> shutdown command. Might this be the case?
If the UPS does shut down, then it will have to do so after a delay and
not immediately on receiving the shutdown command. Does upsc <ups_name>
report anything like
ups.delay.shutdown: 30
ups.delay.start: 40
2015 Oct 13
0
No power cycle after shutdown on Atlantis Land OnePower A03-S1001
Thanks Roger,
the full output of upsc ${myups} is at https://pastebin.mozilla.org/8849188 ;
in particular:
ups.delay.shutdown: 30
ups.delay.start: 180
However, the UPS does not shut down, not immediately nor well after the timeout
of the command: upscmd -u admin -p mypass myups shutdown.return 360
-- Davide
2015 Oct 14
0
No power cycle after shutdown on Atlantis Land OnePower A03-S1001
On 10/14/2015 10:17 AM, Roger Price wrote:
> What does "ps aux | grep ups" report?
ps aux | grep ups
nut 2902 0.0 0.0 20588 1140 ? Ss 00:10 0:02
/lib/nut/nutdrv_qx -a myups
nut 2946 0.0 0.0 37632 1428 ? Ss 00:10 0:00 /lib/nut/upsd
root 2970 0.0 0.0 37616 1436 ? Ss 00:10 0:00 /lib/nut/upsmon
root 2973
2015 Oct 14
0
No power cycle after shutdown on Atlantis Land OnePower A03-S1001
On 10/14/2015 12:18 PM, Roger Price wrote:
> Is there any command in the list provided by "upscmd -l myups" which is accepted
> by this UPS?
None of the command sin the list successfully completes, not even beeper.toggle.
My list:
# upscmd -l myups
Instant commands supported on UPS [myups]:
beeper.toggle - Toggle the UPS beeper
load.off - Turn off the load
2015 Oct 14
0
No power cycle after shutdown on Atlantis Land OnePower A03-S1001
On 10/14/2015 06:11 PM, Roger Price wrote:
> Is /etc/init.d/nut-client a Bash/Dash script? Is it possible to add the option to
> the call of the driver in this script?
Looks like some options can be passed: /etc/init.d/nut-client is a dash script
and when it is started or restarted, it executes:
start-stop-daemon -S -q -p $upsmon_pid -x $upsmon \
-- $UPSMON_OPTIONS >/dev/null
2015 Oct 06
2
No power cycle after shutdown on Atlantis Land OnePower A03-S1001
I changed the driver from blazer_usb to nutdrv_qx, by editing /etc/nut/ups.conf.
To apply changes, I did:
# service nut-server restart
# service nut-client restart
Then I've run a second test, this time simpler than the first one described in
my previous email; the test only consists in toggling off/on a wall switch which
controls power to the UPS. This way, electric ground remains
2015 Oct 14
2
No power cycle after shutdown on Atlantis Land OnePower A03-S1001
On Wed, 14 Oct 2015, Davide Baldini wrote:
> the full output of upsc ${myups} is at https://pastebin.mozilla.org/8849188 ;
> in particular:
>
> ups.delay.shutdown: 30
> ups.delay.start: 180
>
> However, the UPS does not shut down, not immediately nor well after the
> timeout of the command: upscmd -u admin -p mypass myups shutdown.return 360
What does "ps aux |
2015 Oct 14
2
No power cycle after shutdown on Atlantis Land OnePower A03-S1001
On Wed, 14 Oct 2015, Davide Baldini wrote:
> upsdrvctl shutdown
> ...
> instcmd(shutdown.return, [NULL])
> instcmd: FAILED
> Shutdown failed!
> Driver failed to start (exit status=1)
>
> This time /var/log/syslog doesn't register anything about the UPS after
> issuing the command above. Instead, It logged some errors after a
> upscmd -u admin -p mypass
2006 Feb 10
1
newhidups capture - Atlantis-Land HID UPS
Hello Charles!
As promised, I just checked out the CVS and recompiled everything. In
the attached .txt is what is coming out from my UPS. I am wondering
about all those zeroes.
Also, this morning I plan to connect the UPS to a Win box running the
monitoring program supplied with the UPS (UPSilon2000) and a USB sniffer
program. If you have any suggestions on what to look for in the data,
2015 Oct 14
3
No power cycle after shutdown on Atlantis Land OnePower A03-S1001
On Wed, 14 Oct 2015, Davide Baldini wrote:
>> Is there any command in the list provided by "upscmd -l myups" which is
>> accepted by this UPS?
>
> None of the command sin the list successfully completes, not even
> beeper.toggle.
It looks as if the problem is more general than turning off the UPS. The
command mechanism is broken.
> I added -q and -D to
2015 Oct 03
2
No power cycle after shutdown on Atlantis Land OnePower A03-S1001
Hello,
my Atlantis UPS (model on "subject" line) fails to cycle off the outlet power after a power failure
on the mains followed by an automatic shutdown of the computer. The UPS simply remains always on,
preventing the computer from restarting.
** Setup: **
Nut version 2.7.2
Nut driver blazer_usb
Linux 4.1.1
The config files are pretty default; the peculiar customization is
2007 Mar 19
2
Cypress USB driver emulation
Hi, I'm attempting to port an application which uses the Cypress CyAPI,
which is Windows only, though I don't know if wine can handle device
drivers or such low-level stuff.
Anyway, I tried to develop a little prototype to run under wine, hoping
it would provide with some insight.
But this is the output I get:
fixme:setupapi:SetupDiGetClassDevsW : returning empty list
2007 Oct 18
1
Belkin w/ Cypress Semi. interface probs
Hi,
I've recently acquired a couple of Belkin F6H375-USB UPS units that use
the Cypress Semiconductor interface (0665:5161), and they are not
working with my etch servers. The usbhid driver sees them and takes
possession but the nut software does not see anything.
After exploration of the driver, running:
% /lib/nut/usbhid-ups -DDDDDD -a belkin -x vendor=".*" -x
2017 Feb 15
1
Porting to Cypress PSoC 4
Hi,
I'm looking a porting the Opus encoder (encoder only) to a Cypress PSoC 4
(a 32-bit ARM Cortex-M0 with very limited resources), and would like to
know the feasibility of stripping down the encoder to fit. I've been
playing with the encoder configured with "--enable-fixed-point
--disable-intrinsics".
The end result I'm trying to get to is encoding a single 16kHz 16-bit