similar to: Tripplite SmartPro Net 2200 driver

I have a TrippLite SmartPro UP (SMART3000RM2U) that shipped with the DB9 cable# 73-0866. nut doesn't recognize the UPS using the tripplite driver. I found this page: http://www.tripplite.com/support/download/PA12/help/device.htm The link lists the SmartPro series as using the cables 73-0724 or 73-0844 and the Internet 350/525 is listed as using a cable 73-0866. I have a few 73-0844s

I'm running Ubuntu 5.10, featuring a patched kernel 2.6.12. I have a Tripp Lite SmartPro SLT ups connected via USB. I have cleanly compiled and installed the new nut 2.0.3. I do have the "extras", like libusb, installed too. I need some USB advice- that is, I'm not sure what a normal baseline should look like. At boot, the modules usb_core and uhci_hcd are loaded. dmesg

Good afternoon, I am trying to communicate with a new Tripp-Lite UPS via usb and having little luck. After more than a week on this I've decided to ask for help. I am very inexperienced at posting information to message boards, so hopefully I'm doing this right. I assume this is the correct place to post this message. I will start with the equipment I have. I am using Debian Sarge

Hello Nut Devs, I'm working with usbhid-ups and a Tripplite OMNI1000LCD. I used a USB packet sniffer to discover something cool about the watchdog feature in this unit. (not sure if the other OMNI-X-LCD models work the same or not.) Basically there's a single HID variable at Report ID 0x52 (UPS.OutletSystem.Outlet.ffff0092) that's one byte (0-255 int) and it contains the Watchdog

Can anyone help getting a Tripplite SU2200XL to work with nut 2.0.3 using the supplied serial cable? Starting the ups service yields: Starting tripplitesu: Network UPS Tools - Tripp Lite SmartOnline driver 0.02 (2.0.3) Unable to detect Tripp Lite SmartOnline UPS on port /dev/ttyS0 I also have Tripplite's PowerAlert 12 software installed and when run it finds the UPS without a problem. So

[please use reply-all to include the list] On May 20, 2019, at 5:30 PM, Steven Bixby wrote: > > I have a TrippLite AVR550U that my company uses several individual Linux boxes in one large system, all running Ubuntu 18.04LTS, and all will be using the package version of nut - 2.7.4. In my scenario, our usage case is for the PCs to all shut down, followed by the individual UPSes, when

I have a new SMART1050SLT Tripp Lite UPS that both tripplite and tripplitesu drivers hate. Both simply time out with a "can't find" message. Does anyone know about the SmartPro series?

I am trying to get a TrippLite SU1500RTXL2Ua working with nut on Mandriva 2007.1, is there a particular version of nut needed to get this to work? At first I tried nut 2.0.5 (which came with 2007.1) but it wouldn't work, and then research showed it was an older version of nut. So nut-2.2.1-2 src rpm was pulled from Mandriva 2008.1, the binary rpm built, and nut and nut-server installed from

Greetings to all, I recently connected a Tripp Lite SMX500RT1U unit to a Synology NAS (basically a Marvell ARM equipped box running a custom 2.6.24 Linux). I tried using the tripplite_usb driver contained in nut 2.4.1 with not much luck. It does read the model ID and VA rating properly, but fails at everything else - mains voltage (this is a 230VAC EU model), battery config, unit status etc.

I have a TrippLite AVR550U that my company uses several individual Linux boxes in one large system, all running Ubuntu 18.04LTS, and all will be using the package version of nut - 2.7.4. In my scenario, our usage case is for the PCs to all shut down, followed by the individual UPSes, when mains power is removed from the whole system. (This isn't a typical setup for UPS, but it's what

I am running Debian Etch, with the nut 2.0.4 packages, and I get a segmentation fault from tripplite_usb. # /lib/nut/tripplite_usb -u root -DDDDD auto Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.6 (2.0.4) Warning: This is an experimental driver. Some features may not function correctly. debug level is '5' Checking device (09AE/0001) (002/004) - VendorID: 09ae -

Hello, I have a TrippLite SMART1500RMXL2U that I'm trying to get running with Nut 2.2.1. Running upsdrvctl start works, upsd works, but upsc has "issues": je-nas:~/src/nut-2.2.1# upsdrvctl start Network UPS Tools - UPS driver controller 2.2.1- Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.11 (2.2.1-) Warning: This is an experimental driver. Some features may not

The Compatibility page lists the OMNIVS1000 as supported, but the tripplite_usb driver doesn't seem to recognize my UPS. Below is the debug dump from attempting to load the driver. I am using the nut package from Debian: 2.2.1-2.1 and I was wondering if this was a known issue? maroon:/lib/nut# /lib/nut/tripplite_usb -DDDDD -a usbups Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver

Hi, I've been using TrippLite's PowerAlert software with my RM2200XL2U rack system and my APC BackUPS desktop systems. Unfortunately it doesn't work with openSUSE 10.2 (the software has problems with the serial port and UPS interfaces on openSUSE 10.2), so I've been looking at other options. I see that openSUSE 10.2 includes NUT, and it appears to work with my TrippLite UPS via

Hi, I've been trying to get my new Tripplite OmniVS100 UPS (USB Connection) to work on my system. What I have is: Ubuntu 10.04 Server Nut 2.4.3 /etc/nut/ups.conf [omni] Driver = tripplite_usb Port = auto Desc = "My Server" /etc/nut/nut.conf MODE=standalone Iget the following error when using the > sudo upsdrvctl start Network

Hello, We have a Tripplite SMART1500RMXL2U and nut-2.2.0-6.el5 installed on Centos 5.3. I've been unsuccessful on getting upsmon to work. usdrvctl seems to start despite some warnings/errors: # upsdrvctl start smart1500 Network UPS Tools - UPS driver controller 2.2.0- Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.11.1 (2.2.0-) Warning: This is an experimental driver. Some

On May 19, 2014, at 7:12 PM, Stefan Bruda wrote: > Hello, > > First of all thank you so much for the information. No problem, glad it is useful. > [...] > Therefore as far as my UPS is concerned s_value[5] is wildly > incorrect. So it turns out that the RM15002U also does not report anything useful for s_value[5]:

I have added preliminary support for the TrippLite protocol number 2001 into tripplite_usb.c. The attached file is supplied as a patch against today's SVN. This patch adds support for TrippLite SMART550USB and some Omni models. Tested are On Line, On Battery, Battery Good, and Battery Bad indication. Everything else seems to work, but this UPS is attached to a critical system, and I can

Hello, First of all thank you so much for the information. At 22:43 -0400 on 2014-5-15 Charles Lepple wrote: > > On May 15, 2014, at 9:39 PM, Stefan Bruda wrote: > > > What bugs be though is that I cannot seem to be able to read the > > remaining run time on battery. The battery charge is also widely > > inaccurate (it drops to zero really fast and stays

He everyone, I have a Tripplite SMART700DVa using the tripplite_usb from NUT 2.5 (rev 2217) driver running in Solaris 10x86. My driver hangs when trying to connect. Once the driver sends the watchdog command ("W\0"), it can no longer receive any signals and eventually exits. The UPS responds to other watchdog commands ("W5" for example), but there doesn't seem to be