similar to: Access restriction on Upgrade Debian lenny -> Debian squeeze

Dear all, I've been taking my baby-steps toward setting up an Asterisk phone system in my office, as also between my home and office (connected by DSL). I'm have a rough time getting two * boxes talk IAX over a LAN. I don't know what I am doing wrong, but am attaching my iax.conf and extensions.conf on both the boxes. Does anyone see it? ------config files start------ site-0

hi all, using rsync 3.1, I need to use distinct secrets file according to what modules are being "authenticated". This seems to work : (...) secrets file = /etc/rsyncd/secrets1.inc &include = /etc/rsyncd/mymodules1/ secrets file = /etc/rsyncd/secrets2.inc &include = /etc/rsyncd/mymodules2/ (...) ie. any modules declared in mymodules1/ will use users/passwords in secret1.inc

Hi all, We have recently bought an APC UPS and are in the process of setting up the NUT software to make use of it. We are experiencing a problem with the behaviour of the slave systems when the master system goes off line. Although the failure of our master system will (hopefully) be a rare event, and we hope not to experience too many power outages, it is possible (if unlikely) that both

Hi all, I've just upgraded my debian box from etch to lenny, and am now having Nut problems. I have read through the UPGRADING text (which helped fixed my first ups driver related problem), but have now hit another problem, which seems quite common, but non of the responses I've found on Google apply, so I'm coming to you for help. On issuing a "/etc/init.d/nut start"

Hi, I'm using debian sarge on my server and connected a MGE-ups ellipse via the serial port. I searched the internet for the answer, but can't find it. My config files: <upsd.users> [admin] password = pwd allowfrom = 127.0.0.1/32 actions = set instcmds = all [upsmon] password = pwd allowfrom = 127.0.0.1/32 10.0.0.224/32 upsmon master [upsslave] password

I'm trying to execute some commands on my ups, but I keep getting ERR ACCESS-DENIED upscmd -l sinus Instant commands supported on UPS [sinus]: beeper.toggle - Toggle the UPS beeper load.off - Turn off the load immediately load.on - Turn on the load immediately shutdown.return - Turn off the load and return when power is back shutdown.stayoff - Turn off the load and remain off shutdown.stop -

Hi... I'm almost to the point of pulling hair! I was recently given a SOLA-330 UPS However, it didn't come with the comms cable so I'm having some trouble trying to find a pin-out for this UPS and secondly exactly what driver to use with NUT ?? I've got the users manual for a SOLA-325 (from website) and this has a pin-out for this model but clearly it's not the same for

Hi ups-dev ! I bring you some news about my work : it works ^_^ you can now try out the new configuration formalism. I modified upsd, the drivers and upsmon to use the new formalism and the new parser (via the libupsconfig library) The SVN link : svn co svn://svn.debian.org/nut/branches/JD-NewConf How to use it : To test it, I propose that you execute the following commands : Go to the

Hi, this is my first nut installation, i see lot of connection failure and when i tried the configuration removing the power chord from the ups i expected tha machine will power itslef down but this has not happened. I'm using nut 2.2.2-2 from debian lenny, ups is a mustek powermust 2000 with usb cable. All config files are root:nut and 640, i've had to add nut user to nut group

hi i bought a ultra ULT31502 ups someone seem able to run this ups with nut just see Dean thread on: http://www.tigerdirect.com/applications/searchtools/item-details.asp?EdpNo=770423&Tab=11&NoMapp=0 i use suse 10.1, i installed nut the ups is connected directely to my computer with an usb cable lsusb return Bus 001 Device 004: ID 0d9f:0001 Powercom Co., Ltd with lsmod, i can see

Hi thanks Roger, I've amended my hosts.allow file to your suggested one - thanks for that. I'm still getting "Connection refused on the client cgi screen as well as in the shell it gives me UPS upsname at ipaddresshere is unavailable... Any ideas what I can try next to debug why it's not working. Also should the "allowfrom = clientIPaddresshere" line be in my monuser

Hello. So as my english is not so good, i'll try to write my story in bash commands :o) miwa@zork3$ uname -mrs FreeBSD 5.5-STABLE i386 miwa@zork3$ su root@zork3# cd /usr/ports/sysutils/nat root@zork3# make && make install root@zork3# cd ../nut-usb root@zork3# make && make install root@zork3# cd /usr/local/etc/nut root@zork3# cat ups.conf user=root [MGE-Ellipse]

Hello, I'm facing problems as I'm installing NUT to monitor a MGE Ellipse ASR600USBS on a FreeBSD 6.1 box. UPS is recognized as : ugen0: MGE UPS SYSTEMS ELLIPSE, rev 1.10/42.41, addr 2 I'm temporarily using root profile (devfs/devd scripts not modified atm). newhidups starts & runs fine (unplugging mains makes newhidups outputs lots of data when started with -DDDD flags)

I don't reply to messages send to me in private. Best regards, Arjen -- Please keep list traffic on the list -------------- next part -------------- An embedded message was scrubbed... From: Rudolf Cejka <cejkar op fit.vutbr.cz> Subject: NUT and removed allowfrom/ACCEPT/REJECT support Date: Mon, 14 Sep 2009 19:23:17 +0200 Size: 3148 URL:

Hello all, I'm having problems with what I'm told should be a straightforward issue. The message in /var/log/daemon is: <quote> Feb 13 10:37:57 lupin upsmon[31324]: Master privileges unavailable on UPS [lupin1500AVR@localhost]

Hello, I encounter a problem using the UPS MGE Evolution 850 VA USB with Debian Etch and the nut package available for this version. I got this error: ==syslog== Can't connect to UPS [MGE850VA] (usbhid-ups-auto): No such file or directory upsd[2767]: Startup successful upsmon[2769]: Startup successful upsd[2767]: Connection from 127.0.0.1 upsd[2767]: Client MGE at 127.0.0.1 logged

Hello list, I am trying to configure Belkin F6C550-AVR UPS on a Squeeze server. I try with "usbhid-ups" but I get "(driver(s) failed)" message on service start. This is my config: nano /etc/nut/nut.conf MODE=standalone nano /etc/nut/ups.conf [belkin] driver = usbhid-ups #driver = megatec_usb port = auto nano /etc/nut/upsd.conf LISTEN 127.0.0.1 3493 nano

Dear list, Can't make upssched notify me on event occured. OS: Debian, 2.6.26-1-amd64 Nut: 2.4.3-1.1squeeze1 UPS: Ippon Smart Winner 3000 connected via COM On event ( plug out the cord from UPS ) upsmon detect's status change to OB and gives WALL and syslog notify, but no script starting. In syslog no errors and no upssched process occured, just upsmon. There're no PIPE and LOCK

Mr. Selinger, I'm CCing you directly since it appears (insofar as I can tell) that you are one of the delelopers for the newhidups driver. This is the third time I've submitted this (hence the CC this time). Hopefully mailman takes it. I've tweaked my SPF records, and I'm hoping that was the problem. My sincere apologies if this has gone through and I just haven't seen it

Hello, I have virtual machines running with a ceph storage backend. When creating an external qcow2 snapshot with a libvirt version without support for the new object secret passing, the backing file info would list the ceph secret in plain,e.g. # virsh snapshot-create-as vm-123 --no-metadata --disk-only --diskspec sda,file=/var/lib/libvirt/qemu/snapshot/vm-123-wrapper.qcow2 # qemu-img info