similar to: online zinto usv

Hi Arnaud, Hi Scott, Hi list, Here is a patch to support the Zinto D from ONLINE USV-Systeme AG. I already sent a version to Russell Kroll (2006-04-09), without no response and I cannot find support for Zinto in svn until now. I found a discussion on this list about the Xanto from ONLINE, but the Zinto seems to use different commands. The commands are quite similar to those for Opti-UPS, so I

Hi, today I have tested the Zinto 800 with blazer_ser and blazer_usb on Citrix Server 7.0. Both works fine. upsc-Output (blazer_ser): battery.charge: 94 battery.voltage: 25.70 battery.voltage.high: 26.00 battery.voltage.low: 20.80 battery.voltage.nominal: 24.0 device.mfr: device.model: ZINTO 800 device.type: ups driver.name: blazer_ser driver.parameter.pollinterval: 2 driver.parameter.port:

Hello, i try to setup NUT service to read/control my UPS but without success. Problem is when i try to start "/usr/local/ups/bin/upsdrvctl -DDDD -u root start" i got: /Network UPS Tools - UPS driver controller 2.6.2/ / 0.000000/ /If you're not a NUT core developer, chances are that you're told to enable debugging/ /to see why a driver

Hi, I'm building a DIY UPS for a Raspberry Pi using a 12V SLA battery, charger, and an off the shelf 5V regulator. To monitor the battery level I'd like to use an Arduino or similar type device. Since the Arduino can have a serial over USB connection with the Pi I'd like to implement a protocol that can be used with NUT. Does anyone know if something like this has already been done?

Hi Matthias, thanks for writing, but please reply to the nut-upsdev mailing list, not to me personally. There are lots of good people on the list whose input you wouldn't want to miss. Thanks, -- Peter Matthias Goebl wrote: > > On Sun, Nov 26, 2006 at 12:40:44PM -0400, Peter Selinger wrote: > > Matthias, > > > > NUT drivers should always detect devices

Hi Users NUT, I want monitor a UPS of brand SMS (Sinus Double 8 KVA) using a raspberry-pi. In compatibility list, is listed to use the blazer_ser driver. I use a USB adapter to RS-232 conected in to the No-Breake. Follow the comands e confs. root at rasp:/home/pi# lsusb *Bus 001 Device 004: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port* Bus 001 Device 003: ID 0424:ec00 Standard

Carsten, This is a common issue in technology when you have complex products that the majority of consumers of those products do not understand how they operate. If most UPS customers understood the importance of standardization they would have refused to purchase non-standard UPSes and all UPSes would have long ago standardized on a single management protocol. The normal thing is that product

Hello, I have a Yunto e a Zanto ups connected with usb with id 06da:0002 and 06da:0601. I have seen that people had some success using megatec driver. But now megatec is replaced by blazer-usb and I am not able to use my upses under nut. Can you help me? Thanks! Mario

Hi NUT-Team, I have an effekta MKD1000 USV and I want to connect with NUT over serial device to this USV.I have used blazer_ser as driver but I cannot get a connection to the USV. When I have a look to the driverlist then the effekta MKD1000 is not listed.In a window-System I can connect to the USV with the UPS management system from generex. Can you please help me to connect with NUT to the USV.

Hello List, i have a "PowerWalker VI 400, VI 600, VI 800" ups, which i bought on ebay since it said it supports Linux. Well, it came with a closed source binary written in Java. :( Has anyone a config file which will fit to my PowerWalker ups/usv? The genericups driver doesnt seem to work. Thanks, Mario -- GMX DSL = Maximale Leistung zum minimalen Preis! 2000 MB nur 2,99, Flatrate

I''m sorry to be asking trivial questions, but I''m new to RoR and am hooked :), so I''m very impatient to get things up and running. given two related tables, "pcs" and "venues" (venues have many PC''s and each PC belongs to one venue only) I can use a select() to present venue names in the "new PC" form along with other PC details to

Dear Nut-Devs, I have general question to the contribution and the handling of new code in the NUT-Project. We would like to implement our USV-Solution as a driver to NUT, but we are having the problem, that we need a powerful “C”-based gpio library for it. We discussed this topic internally, and we are having the opinion, that it does make sense, to write this library separate from a

Anyone have an idea as to how to automatically detect the USB number and create a sym link in the dosdevices directory. The problem is that I have several USB devices not used at the same time, and when the USB to serial adapter is connected, a /dev/ttyUSB? is assigned. To use this assignment under WINE, I need to automatically detect /dev/ttyUSB? and then create a sym link in

I know this may sound a bit lazy, but I don't really wanna bother with writing many scripts from the Administration of my SMB-2.2.2 as an NT PDC Box... (like adding users, deleting users, adding shares and modifying passwords stuffs, knowing that I do the Unix-SMB password sync)... So does anyone have good scripts, or some reference pages?? I searched everywhere in vain for that... Thanks in

Can someone address the boot once option. Is it to hard for syslinux to write a flag file to file system or the blank space after the mbr? .conf bootonce Lable /boot/flagfile or .conf bootonce Lable1 /boot/flagfileLable1 bootonce Lable2 /boot/flagFileLable2 bootonce Lable2 /boot/flagFileLable2 skip the default option if the flag file is 0 size. Write something to the

Dear ladies and gentlemen, we are developer and producer of UPS devices. Now we would like to integrate a small UPS via USB connection to NAS systems. We heart from third party that we need a special driver for NAS systems to work fine and to display also the company name and UPS device name in the web page / software of NAS. Currently we have a UPS with USB and our own VID (0x2B2D) and PID

Hello All, I am trying to read my Eaton 5P 1550 with the Rs-232 port but I cannot get nut to read the driver from my Rs-232 to USB adaptor. When I perform lsusb -t it says my B&B electronics adaptor uses driver ftdi_sio How do I get the nut to read information coming from that?? Thanks, Connor -------------- next part -------------- An HTML attachment was scrubbed... URL:

On Feb 26, 2014, at 2:10 AM, Victor Romero wrote: > I got a UPS Sola Basic but it is not working, I'm providing the details. I hope that someone can help me to get it working. > > Please let me know if there is some other information that I should provide :) Thank you for providing all of this information! > OS name and version > Ubuntu 12.04 > $ uname -a > Linux

I got a UPS Sola Basic but it is not working, I'm providing the details. I hope that someone can help me to get it working. Please let me know if there is some other information that I should provide :) OS name and version Ubuntu 12.04 $ uname -a Linux olimpo 3.8.0-29-generic #42~precise1-Ubuntu SMP Wed Aug 14 16:19:23 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux Exact NUT version, 2.7.1

Hi, I know the answer is probably negative, but there's no harm in asking right? I have a Polycom C100 communicator and from what I can find about it, the real work done to make the audio as good as it is, is done in the software they install on Windows XP. It is a USB connected desktop handsfree mic/speaker device and it does work on Linux O.K. but I get some problems with echo when