similar to: nut 2.4 et MGE CometEXtrem 6

Hello I almost managed to make everything work my server isn't in prodution because i had some problem on others system but last week i come back and i run an update on ubuntu 12.04.1 to 12.04.2 I don't known if its' the reaseon or if someone has change something but scripts no longer work I have a message "returned 2" Can you help me because I don't find how to solve

Hi Sabine and Christoph, I've just committed a few changes to mge-utalk (r2749). can you please try a snapshot and report back the results: http://new.networkupstools.org/download.html#Snapshots cheers, Arnaud -- Linux / Unix Expert R&D - Eaton - http://powerquality.eaton.com Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer -

I'll be back one more time perhaps I found the reason of these errors Nov 13 11:09:22 mezenc upsmon[3865]: Poll UPS [mgeups at localhost] failed - Data stale it happens when daemon upsd et upsmon are started after the boot obviously, there isn't any errors when upsd and upsmon are started at boot following later ... -----Message d'origine----- De : goudard sabine Envoy? : mardi

Hello I'm back with another problem I made a lot of tests with my ups MGE I worked on my script upssched-cmd and i stopped several times my ups etc etc .... Suddenly my UPS wasn't be detected by my server I tried restore my system I tried modify files without success my UPS isn't detected by my serveur When I enter this command lsusb I have had no more this bus001 device 002 : ID

hello, I installed with NUT UPS MGE Pulsar Evolution 2200 all orders of arrest, interrogation etc etc ... UPS work well However, I have a problem with the order in NOTIFYCMD upsmon.conf that not run ... I created a script that generates a simply log I indicated in upsmon.conf NOTIFYCMD / home / nut / alert_ups.sh below my upsmon.conf RUN_AS_USER nut MONITOR pulsar at localhost 1 admin1

hello, at first I'm sorry my english isn't perfect but I tried to be clear I work with mandriva 2007 and with nut 2.0.1 installed with urpmi my UPS is a MGE Evolution 2200 connected with RS232 in my ups.conf I try to use mge-utalk driver and also mge-shut both seem to work I don't really known which I add to use It's the first point. As I saw on web site, I add maxage 25 in

?Hello Sabine, this seems as a problem with PATH env. variable; if you issue the command by hand, you do so in an environment with PATH set so that the binaries are found. I guess that the nut user doesn't have so nice PATH, being non-interactive. Try to add full paths to your binaries in the command and see what happens... Regards, vasek -- Vaclav Krpec NUT developer

Hello I'm running a script via upssched on a onbatt event, I want to sent a email, shutdown a windows server and shutdown an ubuntu server When I run my script manually, all is ok but via upssched-cmd it return "exec_cmd returned 255" here is the script #!/bin/bash # send mail to admin echo "ECO" | mail -s "ARRET SERVEURS NON PRIORITAIRES" moi at domaine.fr net

Hello, I'll be back with my MGE Evolution 2200 connected with RS232 I upgrade nut 2.0.1 in nut 2.2 + psp as you ask me PSP autodetect my UPS and autoconfigure NUT. not really diffcult ! So I didn't change anything but I always have in my syslog these event Nov 13 11:09:22 mezenc upsmon[3865]: Poll UPS [mgeups at localhost] failed - Data stale Nov 13 11:09:27 mezenc upsmon[3865]: Poll

Hello, I forgot nut since more than a year because a lot of job with other application My server nut failed since severals months We had 3 electric failure so I must install a new server nut I work with ubuntu 10.04.4 (64bits) / I installed nut 2.4.3 with deposits I have a MGE Pulsar evolution 2200 connected on usb last week when I began my tests all was ok (communication etc etc ..)

Hello, I have a EATON 5PX with a Network Management Card on ubuntu 12.04 I established a shutdown procedure like described in rogerprice.org It works I have an event mail on "onbatt" then another on "onbattdelay1" then the "upsmon -c fsd" order on "onbattedelay2" When "onbattdelay2" is finished, my server execute "auto logout and shutdown

hello, I tested all config with my ups and psp all seems to be OK now, I had change ups name and user name in ups.conf, upsd.users, upsmon.conf etc etc ... but I have quickly these events in my syslog without doing anyting what can I do ? Nov 15 11:09:22 mezenc upsmon[3865]: Poll UPS [pm2200 at localhost] failed - Data stale thanks a lot for your help Sabine GOUDARD Ecole Nationale

Credit goes to "cppcheck". Signed-off-by: Thomas Jarosch <thomas.jarosch at intra2net.com> --- drivers/mge-utalk.c | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-) diff --git a/drivers/mge-utalk.c b/drivers/mge-utalk.c index c6114c7..616e2ad 100644 --- a/drivers/mge-utalk.c +++ b/drivers/mge-utalk.c @@ -465,7 +465,8 @@ void upsdrv_shutdown(void) { char

Hello, I recently had a failure with my old MGE ESV8 ups, it just died on me so I had to get a new one. I found a MGE ESV8+ cheap and everything seems to work fine with it except the communication with the computer. The old ESV8 (non +) worked fine with NUT after applying some patches I got from the mailing list, but I think they are in the source tree now. I'm using the same cable that

Dear Sirs, I have an old but very well-working UPS MGE Pulsar ESV8+ Rack. I'd like to use it to power FreeBSD 9.0-Rel server. Of fortunately I have problem with recommended driver - mge-utalk, nut 2.6.4 (installed from FreeBSD Ports). I get messages: Could not get multiplier table: using raw readings. and updateinfo: Cannot update system status I saw similar thread on mailing list with no

Hi everybody, Sorry for the eternity it took to solve the UTalk problems, but I've been busy on so many fronts... I've updated the CVS Testing tree, which will soon become 2.0.3 stable release, with mge-utalk 0.87. This release fixes the UTalk problems you have recently faced. If possible, please test it and report back if it work or not with your unit. To do so: 1) Retrieve the source

Hi, I'm running into an issue while using FreeBSD 5.4, NUT from ports (2.0.3), serial on /dev/cuaa1, Ellipse 1200 USBS. The ups.conf is : [ellipse] driver=mge-utalk port=/dev/cuaa1 desc="Telecom Closet Ellipse" When I go to start it I get : Network UPS Tools - UPS driver controller 2.0.3 Network UPS Tools - MGE UPS SYSTEMS/U-Talk driver 0.87 (2.0.3)

I have an MGE Pulsar Evolution 1100 connected to a Debian box, with nut-2.0.1 (the standard "sarge" packages). I have it connected through USB, and I'm using newhidups. However, about once a day the driver looses contact with the UPS and I have to restart NUT to get it to drop the "data stale" nonsense (it happens more often than this, but most times it recovers without

Hello, I'm using an MGE Evolution 1500 with a Debian Sarge 2.4.27 smp server. NUT is using the mge-utalk driver. [ups1500] driver = mge-utalk port = /dev/ttyS0 Seens I did a test.battery.start, my UPS goes off (beep!) once per week (same day, same hour). I guess there should be a very easy explanation for this, unfortunatly, I haven't found it yet. I've tried to upgrade

On Mar 3, 2017, at 8:21 AM, Charles Lepple <clepple at gmail.com> wrote: > > On Mar 2, 2017, at 3:38 PM, David Baker <david at baker.im> wrote: >> >> I?ve read the documentation, and it would appear that this can be set by the U-Talk protocol (page 34 of http://networkupstools.org/protocols/mge/9261zwfa.pdf) but I can?t seem to figure out how to send the device the