similar to: nut 2.4 et MGE 2200

Hello I'm back with another problem I made a lot of tests with my ups MGE I worked on my script upssched-cmd and i stopped several times my ups etc etc .... Suddenly my UPS wasn't be detected by my server I tried restore my system I tried modify files without success my UPS isn't detected by my serveur When I enter this command lsusb I have had no more this bus001 device 002 : ID

Hello My server with another UPS (MGE Pulsar Evolution2200 USB) is OK. All scripts work Is it possible to work with a UPS MGE CometExtrem 6 on serial port Which driver can I use ? I tried with mge-shut ou mge-utalk without any success when I start driver with upsdrvctl with mge-utalk I have (after a long time) Can't connect to UPS [MGE_cometEX] (mge-utalk-MGE_cometEX): No such

Hi Sabine and Christoph, I've just committed a few changes to mge-utalk (r2749). can you please try a snapshot and report back the results: http://new.networkupstools.org/download.html#Snapshots cheers, Arnaud -- Linux / Unix Expert R&D - Eaton - http://powerquality.eaton.com Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer -

Hello I almost managed to make everything work my server isn't in prodution because i had some problem on others system but last week i come back and i run an update on ubuntu 12.04.1 to 12.04.2 I don't known if its' the reaseon or if someone has change something but scripts no longer work I have a message "returned 2" Can you help me because I don't find how to solve

I'll be back one more time perhaps I found the reason of these errors Nov 13 11:09:22 mezenc upsmon[3865]: Poll UPS [mgeups at localhost] failed - Data stale it happens when daemon upsd et upsmon are started after the boot obviously, there isn't any errors when upsd and upsmon are started at boot following later ... -----Message d'origine----- De : goudard sabine Envoy? : mardi

Hello, I forgot nut since more than a year because a lot of job with other application My server nut failed since severals months We had 3 electric failure so I must install a new server nut I work with ubuntu 10.04.4 (64bits) / I installed nut 2.4.3 with deposits I have a MGE Pulsar evolution 2200 connected on usb last week when I began my tests all was ok (communication etc etc ..)

hello, at first I'm sorry my english isn't perfect but I tried to be clear I work with mandriva 2007 and with nut 2.0.1 installed with urpmi my UPS is a MGE Evolution 2200 connected with RS232 in my ups.conf I try to use mge-utalk driver and also mge-shut both seem to work I don't really known which I add to use It's the first point. As I saw on web site, I add maxage 25 in

Hello, I have a EATON 5PX with a Network Management Card on ubuntu 12.04 I established a shutdown procedure like described in rogerprice.org It works I have an event mail on "onbatt" then another on "onbattdelay1" then the "upsmon -c fsd" order on "onbattedelay2" When "onbattdelay2" is finished, my server execute "auto logout and shutdown

hello, I tested all config with my ups and psp all seems to be OK now, I had change ups name and user name in ups.conf, upsd.users, upsmon.conf etc etc ... but I have quickly these events in my syslog without doing anyting what can I do ? Nov 15 11:09:22 mezenc upsmon[3865]: Poll UPS [pm2200 at localhost] failed - Data stale thanks a lot for your help Sabine GOUDARD Ecole Nationale

?Hello Sabine, this seems as a problem with PATH env. variable; if you issue the command by hand, you do so in an environment with PATH set so that the binaries are found. I guess that the nut user doesn't have so nice PATH, being non-interactive. Try to add full paths to your binaries in the command and see what happens... Regards, vasek -- Vaclav Krpec NUT developer

Hello, I'll be back with my MGE Evolution 2200 connected with RS232 I upgrade nut 2.0.1 in nut 2.2 + psp as you ask me PSP autodetect my UPS and autoconfigure NUT. not really diffcult ! So I didn't change anything but I always have in my syslog these event Nov 13 11:09:22 mezenc upsmon[3865]: Poll UPS [mgeups at localhost] failed - Data stale Nov 13 11:09:27 mezenc upsmon[3865]: Poll

Hello dear all, I try to use NUT for windows (not WinNUT), and stuck with launching NOTIFYCMD. On any event marked as SYSLOG+WALL+EXEC syslog entry appears, popup window appears, but NOTIFYCMD script doesn't run. If I run upsmon.exe in cmd (i. e. not as a service) everything works fine. Here is my upsmon.conf: MONITOR central at 10.35.0.180 1 user password slave MINSUPPLIES 1 SHUTDOWNCMD

Hi everyone, new to the list but a long time nut user. I've tried a couple of times to set up a timer to avoid getting annoying messages when the system goes on battery for only a few seconds. in uppsched.conf I added this at the bottom: AT ONBATT * START-TIMER onbattwarn 60 AT ONLINE * CANCEL-TIMER onbattwarn What am I missing? it still doesn't wait before alerting me.

Hello! After I type "upsmon", in syslog the following message appears: Aug 16 14:11:09 marto upsmon[7731]: Master privileges unavailable on UPS [Inform@localhost] Aug 16 14:11:09 marto upsmon[7731]: Reason: Access denied Can you tell me where my error is, my configuration files are: ups.conf: [Inform] driver = powercom port = /dev/ttyS0 desc = "inform guard" linevoltage = 220

Hello I'm running a script via upssched on a onbatt event, I want to sent a email, shutdown a windows server and shutdown an ubuntu server When I run my script manually, all is ok but via upssched-cmd it return "exec_cmd returned 255" here is the script #!/bin/bash # send mail to admin echo "ECO" | mail -s "ARRET SERVEURS NON PRIORITAIRES" moi at domaine.fr net

Hello NUT Team! I am testing the early shutdowns in NUT 2.6.5-1 package for Windows (Windows 7 x64). My configuration files: upsmon.conf RUN_AS_USER upsmon MONITOR upsa at 192.168.10.200 1 upsmon pass master MINSUPPLIES 1 SHUTDOWNCMD "/sbin/shutdown -h +0" NOTIFYCMD "upssched.exe" POLLFREQ 5 POLLFREQALERT 5 HOSTSYNC 15 DEADTIME 15 POWERDOWNFLAG

Hi, I'm having problems to configure upssched in order to notify me only when the disconnection exceeds the 30 seconds. Now, I'm getting a mail if it is disconnected just for a second, or even worse, when I got low tension. So, mail notifications are well configured, I guess... I think the problem is in upssched. I'm new to this, so it could be a stupid thing that I'm missing...

Here is the previous email that I sent directly to Charles Lepple. ?I am now sending to the correct email with cc to Charles. ---------------- I am looking at, and trying to understand the rest of the conf files. ?But first want to askabout something from this message:[CODE]root at debian:/home/john# upsdrvctl startNetwork UPS Tools - UPS driver controller 2.7.2Network UPS Tools - Megatec/Q1

Yes, that was the power off test. However the upssched-cmd script gave absolutely no signs of activity. Even it's logger lines don't show up in journalctl. No any permission error messages - nothing. Only the 2 messages from upsmon - on battery and then on line power. Here is the nut-report: http://www.filehosting.org/file/details/518300/NUT.report --- George Anchev On Tue, Oct 27,

Well it is the season for storms and power outages here in the US PNW. I noticed that today when the power went out, NUT mostly did what I hoped/wanted. But it did not actually turn off the UPS at all. The UPS kept beeping and I had to turn it off manually. I thought that NUT would handle this. But perhaps it cannot for my unit? Or perhaps I have things improperly configured? Any suggestions?