similar to: syslog flooding

* OS name and version, Gentoo, updated * exact NUT version, 2.6.2 (also tried 2.6.0-r1) * NUT installation method: from source tarball, package or Subversion, portage * exact device name and related information (manufacturing date, web pointers, ?), Eaton 3S 550/700 * complete problem description, with any relevant traces, like system log excerpts, and driver debug output. You can obtain the

Thanks again for your help, Charles. I was able to install the Tripp Lite software on my Ubuntu machine, and it sort of works. It does something which continually changes the USB device ID of the UPS, and prints voluminous error messages in the log. However, one of the things that it can do is to schedule a UPS shutdown, which Nut does not know how to do. So I monitored the USB port with

Greetings people; The section of drakeconf that pclos uses has two problems. First is several screens full of complaints about deprecated syntax in "/etc/udev/rules.d/70-nut-usbups.rules" at each reboot. So I pulled the current 2.5 svn trunk, then found I was missing quite a few build tools needed here that aren't used when building a kernel, currently running a 32 bit

Does anybody have any ideas on this? On our server that has been running 'rock-solid' with no crashes we have now had 3 kernel panics that each appear to have been triggered by the newly upgraded samba daemon. We used to run samba 3.0.21a for 'years' with no crashes. On May 26 we upgraded to 3.0.25 June 9 10:58:28 first crash kernel panic process involved according to log

Greetings all; I've probably got something miss-configured, but I have an intermittent smbd problem, where it will use 15% or so of this machine and nearly all the much slower firewall box. I'll try to give enough data here, so my apologies about the length of this post. The installed samba versions on this very heavily patched RH8.0 machine are: --- [root@coyote root]# rpm -qa|grep

On Aug 29, 2014, at 2:02 PM, Barry Skrypnyk <barry at skrypnyks.com> wrote: > See comments below. > >> -----Original Message----- >> From: Charles Lepple [mailto:clepple at gmail.com] >> Sent: Friday, August 29, 2014 5:35 AM >> To: barry at skrypnyks.com >> Cc: nut-upsuser at lists.alioth.debian.org >> Subject: Re: [Nut-upsuser] Smart1500lcdt will

Hi. I'm having trouble with nut-2.0.3 on a linux kernel 2.4.32 machine and a MGE Evolution 3000. The problem is that I'm getting the following message, repeatidly, on dmesg: usbdevfs: usb_submit_urb returned -22 (-22 means -EINVAL) I traced the problem with newhidups -DDDDDD auto and found out that the -22 error appears in a line "none (-22)" of the output as: ----------

Hi, I'm trying to setup my Mustek 600 with USB (no serial ports on my computer) on Gentoo. The configuration I use is: [Mustek] driver = megatec_usb port = auto desc = "Power Mustek 600 USB" The NUT I use on my x86_64 machine is: sys-power/nut-2.4.3-r2 USE="bash-completion ssl usb xml -cgi -hal -snmp" When I start upsdrv I get: weasel ~ # /etc/init.d/upsdrv start

# export USB_DEBUG=5 # /usr/local/ups/bin/usbhid-ups -a CP550SLG -DDDDD Network UPS Tools - Generic HID driver 0.34 (2.4.3) USB communication driver 0.31 0.000000 debug level is '5' 0.000426 upsdrv_initups... usb_set_debug: Setting debugging level to 5 (on) usb_os_init: Found USB VFS at /dev/bus/usb usb_os_find_busses: Found 001 usb_os_find_busses: Found 002

Another Update: I had to reboot my server today. After the reboot, I had the exact same problem as before without the usb hub. Since I already had the ups connected and communicating, I decided to try to figure out how to fix it. Here is what worked for me using the usb 2.0 hub sudo upsd ?c stop sudo upsdrvctl stop sudo upsdrvctl start sudo upsd Everything connected up and was

Barry, I have had success with NUT on Debian and an EATON 5E2000IUSB-AU 5E 2000VA/1200W UPS With 3 x OUTLETS which I believe is good value. I would believe the the EATON ?5E 1500VA/900W UPS With 3 x OUTLETS would work just as well. The 1500VA also uses the same batteries as the 2000VA so I would believe it would run its raited load longer than 2000VA. My eight drive RAID driver uses less that

hi all Using a vanilla 2.4.23, I try to setup the USB FXS interface to add an old gray 1960 rotary dial phone for a demo. But it doesn't work :( Can someone decipher the below messages and help me out here? Please ask if more info is needed roy usb.c: kusbd: /sbin/hotplug add 4 usb.c: kusbd: /sbin/hotplug add 4 usb.c: kusbd: /sbin/hotplug add 4 usb.c: kusbd: /sbin/hotplug add 4 hub.c:

I talked to Tripp Lite Technical support. Their policy is that they only support Fedora and SUSE. There is no one there that could help with Ubuntu or NUT issues. The only answer they could give me was to port the rpm files to Ubuntu and use them. This is way beyond my experience level. I will go to the local electronics store and buy a cheap USB 2 hub to see if that works. I will post the

Edit file vi /etc/init.d/klogd In line KLOGD="" Change to KLOGD="-c 5" And restart klogd /etc/init.d/klogd restart _____________________________________________________ Keny Hayakawa Schmeling Diretor Comercial/Administravivo Tel: 5566-1465 Fax: 5566-6541 http://www.optinfo.com.br kenyhs@optinfo.com.br

Irritating quirkyness: we have a bunch of videocams. To use, we use gspca. Usually, on an upgrade, I just go into the gspca directory (which appears, from their website, to have not been updated since '07), make clean, make, make install. Having gone up to 5.5, did the same. What's happening now is that it works, delivers the mpgs... but dumps errors in the logs: <snip> kernel:

I wasn't doing anything .. really! ;-) ..but I got this Oops with process = smbd. (Using samba-3.0.28-0.fc7) Is is a samba problem? """ Mar 30 12:26:39 jgs kernel: Oops: 0000 [1] SMP Mar 30 12:26:39 jgs kernel: CPU 0 Mar 30 12:26:39 jgs kernel: Modules linked in: ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 xt_state nf_conntrack nfnetlink ipt_REJECT xt_tcpudp

On Tuesday 07 May 2019 09:49:47 am Charles Lepple wrote: > On May 7, 2019, at 9:09 AM, Gene Heskett wrote: > > On Tuesday 07 May 2019 08:38:44 am Charles Lepple wrote: > >> On May 7, 2019, at 5:06 AM, Gene Heskett wrote: > >>> New testing install(stretch) > >>> pulled in nut stuff from repo. > >>> copied old wheezy configs to /etc/nut,

On Aug 7, 2013, at 7:40 AM, Jan Phillip Greimann wrote: > I tried to set up nut with our new arrived HP R1500 G3 UPS but there is a failure with the usb connection. After trying "/lib/nut/usbhid-ups -DD -a hp1500" the log says there are "libusb_get_interrupt: Connecion timed out". If you start upsd, what does "upsc hp1500" return? There are two ways to fetch

Hi everyone, I've posted some rpm builds of samba 4.11.3, 4.10.11 and 4.9.17 for RHEL/Centos 7.x (currently 7.7). The 4.11 rpms use the python3 and python3-devel rpms introduced in the standard RHEL/Centos repos at the same time as the 7.7 version. Comments and/or testing feedback would be most welcomed. http://nova.polymtl.ca/~coyote/dist/samba/samba-4.11.3

Greetings all; Back to a thread I started back in May of 2008 I think. I never did get this belkin and nut to talking, so I thought I'd make another run at it. Trying to run the driver as the user gene, I'm getting this: --------------------------- [root at coyote ups]# su gene -c "/sbin/belkin -D -a myups" Network UPS Tools - Belkin Smart protocol driver 0.21 (2.2.2) debug