similar to: [Eaton ex-MGE Ellipse ASR] Disable automatic battery test

Hi all Arnaud, Some newly purchased Ellipse ASR-model UPS find their way to my office for a first evaluation test. It concerns the Ellipse 1500 and Ellipse 1000 models. As you know we are still working with hidups. Peripheral recognition, start of NUT, mains short interruptions management, all that work fine... as expected ;-) But changes occured on the delayed shutdown procedure after the

Hello, I have Ellipse ASR 1500 UPS and now I'm trying to monutor it with NUT from FreeBSD. It seems that there are some problems with this UPS: =================================== ugen0: MGE UPS SYSTEMS ELLIPSE, rev 1.10/42.41, addr 2 > usbdevs -v Controller /dev/usb0: addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), NEC(0x0000), rev 1.00 port 1 powered port 2

Hello guys, I have to manage an Eaton Ellipse ASR 750 VA UPS under a FreeBSD 8.2 server. I used nut from ports collection but I'm unable to detect the UPS by USB cable. Here is the output of 'usbconfig -u 4 -a 2 dump_device_desc' : ugen4.2: <ELLIPSE EATON> at usbus4, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0110

Hi all, I am trying to communicate to this Eaton Ellipse (see above) using nut from a Debian Squeeze system on Armel architecture. But have not succeeded so far. Version: Linux b3 2.6.39.4-11 #1 Tue Apr 3 21:45:12 FET 2012 armv5tel GNU/Linux Nut version is 2.4.3-1.1squeeze2 this information if from dpkg. NUT installation method:from debian package for armel. The problem is I cannot

On Jun 20, 2013, at 10:35 AM, Louis Chaillet wrote: > With respect clarification of the documentation (and reference to your question Charles). The documentation does suggest that you can shutdown the ups by the upsdrvclt shutdown [ups] command. Specifically in "http://www.networkupstools.org/docs/man/upsdrvctl.html" in the section commands under warning. In the "Network UPS

Hi Charles, thank you for your answer. This was indeed the core of the problem. I have amended the configuration files. It means now the communication works as required. Alas I now have another problem. Just for the record here is the configuration after the changes. The configuration is as follows. #nut.conf MODE=standalone #ups.conf [eaton] driver = usbhid-ups port = auto

Hi everybody, If we let the feature running, it appears that the driver gets unbound after a while ( variable from quarter of hour to 6 hours ) and cannot reconnect. This behavior appear with both MGE Ellipse ASR and non-ASR models with connection to an UHCI and OHCI controllers. The USB core is from 2.4.28 kernel. We use nut-2.0.3. Start, powerfail and recovery detections, UPS shutdown work

Hi there, I've replaced yesterday my old UPS with a brand new "Eaton Ellipse MAX 600 USBS". I've choosed the Eaton (previously MGE) both because I've always been extremely satisfied with MGE UPSes of all kinds at work, and because of the involvement of MGE (with Arnaud) in nut development, which made me quite sure that I would have no trouble with an Eaton (MGE) UPS and

Hi Arnaud, hi all I wish you all the best for 2006. Enjoying of some less stressed time, I follow your advice, Arnaud, to switch our UPS management on the newhidups driver. ( Enfin ! ;) Our goal is to support (soon) the new MGE ASR ELLIPSE ( and of course also the old ELLIPSE and EXTREME models ). I rebuild the libusb-0.1.10a packages to conform to our installation process. I perform the same

Hello everybody, After succeeded in "tuning" nut-2.0.0's hidups and 2.0.3's newhidups on customized Linux kernels, we are now facing a new challenge : trying to install nut-2.0.5 on a RedHat ES4 which is based on a 2.6.9 kernel. I picked up the 2.0.5 source package and follow the INSTALL doc until step 6. So far so good. RH ES4 is managed by udev, therefore I presume we

My new MGE Ellipse Premium 1200 is now working fine. I've tested pulling the plug and the computer shuts down properly and comes back up when I replug. The only strange behaviour is that when I put the power back on the battery shows as being at 86%. If it was at 86% it should have lasted longer. Is there any calibration step I can do? The only commands the ups seems to support are: $ upscmd

please tell me how i can use the hyperterminal to calibiration of my ups sua 1000VA. nut-upsdev-request@lists.alioth.debian.org wrote: Send Nut-upsdev mailing list submissions to nut-upsdev@lists.alioth.debian.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.alioth.debian.org/mailman/listinfo/nut-upsdev or, via email, send a message with subject or body

Hi i have a question concerning the acl supoprt of samba, i have a mandrake9 (2.4.19) with a xfs partition installed locally i can get and set acls on the xfs parition snip [root@aclsmb data]# getfacl samba/ # file: samba # owner: root # group: root user::rwx group::r-x other::r-x [root@aclsmb data]# setfacl -m u:smalchow:rwx samba/ [root@aclsmb data]# getfacl samba/ # file: samba # owner:

I have an MGE Ellipse Premium 1200 that I connected to my server using its USB cable. Nut seems to be working fine. I've done a power down test and it worked and came back up when the UPS had power again. I'm using the newhidups driver and the USB cable. The problem I'm having is that if I boot with the cable connected newhidups says it can't find the UPS. If I unplug and plug in

Hello, I have an MGE Ellipse 500 UPS for about 8 years, connected to a local OpenBSD server through usb, running nut-2.2.1. I used to occasionally drain the UPS battery to see if the local server was shutting down cleanly my desktop PC and it was working OK. Suddenly, there was a power failure last week, the UPS was serving the two PCs (the server and the client) for 30 secs and then it went

[fwded to the list] Hi Fran?ois, > I didn't post this on the list as it seems a little bit more MGE > stuff than nut. Anyway feel free to post it if you consider it's > relevant. > > This is the trace you were asking for. The Ellipse 800 correctly shut > down in this test : > > This was running on a i386 recent hardware, the cpu load is under 5%, > 360MB out of

Hi, My UPS is MGE Pulsar Ellipse Premium 1200VA, connected on USB port, usbhid-ups driver. Using simply KNotify about UPS connection states I noticed that sometimes unpredictably a notification appears that the USB connection to the UPS is lost and a few seconds later another notification appears that the connection is restored. And this repeats to infinity. The only way to get out of it is to

Fellows, back for 4 days, the baby and the mother are now at home, and the father is... hem, well not so fresh ;-) For those interested in some pictures: http://benjamin.quette.free.fr/ 2006/11/16, Peter Selinger <selinger@mathstat.dal.ca>: > ... > Arnaud: could you please amend the instructions on the NUT download > website http://www.networkupstools.org/source.html (Development

Hi again, As a followup to my previous post, just a couple words to add a comment on the numerous tests I did the past days. It was necessary to increase the waiting time in the /etc/ rc.shutdown, to wipe out the remaining problems (ups didn't shut down). # a rather large sleep to insure the ups stop babbling sleep 20 It appears the ups needs more than 20 seconds to

I'm now doubting if I've made this statement or not, so here it is: newmge-shut is *not* ready for production usage! I've lately found some bugs during the MGE PSP 3.0.4/3.0.5/3.0.6 updates. So for the moment, prefer to keep using mge-shut. 2007/10/25, R?zsa G?bor <mailer.tovis at freemail.hu>: > newmge-shut ??? > Shutdown, switch of ups does not work. Using command >