similar to: Problem w/ Belkin UPS on FreeBSD

Hi; I'm having some trouble to comunicate with my just bought (08/17/15) Ups. According to SOLIS(8): SUPPORTED HARDWARE This driver has been tested with : Solis 1000 VA Solis 1500 VA Solis 2000 VA Solis 3000 VA Back-UPS BZ1200-BR Back-UPS BZ2200BI-BR So solis is the one to go for. Here is my scenario: SW: nut-2.7.3 (compiled from ports) OS: FreeBSD

Hello all. I have a supermicro 16 bay box with a LSI 9211-8i card. We use it for temp data storage, and we wanted to try the l4z compression. After updating the source tree to r247839: and doing a make buildworld cycle all works fine. But at boot time we get some warnings. make_dev_physpath_alias: WARNING - Unable to alias gptid/281951f4-a996-11e1-83eb-00259061b51a to enc at

Thx for the info Charles. Here is what I am seeing from 'usbconfig list' ugen0.1: <EHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE ugen1.1: <EHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE ugen0.2: <product 0x0024 vendor 0x8087> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE ugen1.2: <product 0x0024 vendor

Hi, FreeBSD-9 works fine on this Lenovo T400 - except that suspending with no USB devices plugged in result in no ports working after resume. If I have a device plugged in during suspend - on any port - then all the ports work fine after resume. I've attached usbconfig and acpidump output. here's what is logged in the kernel buffer during suspend and resume: Her'es the suspend:

hi. why choose 1.4? correctly 1.3 FreeBSD hq.local 9.1-PRERELEASE FreeBSD 9.1-PRERELEASE #1: Tue Jul 31 19:48:36 MSK 2012 root at hq.local:/sys/amd64/compile/HQ amd64 ugen1.3: <DELL> at usbus1 uhid0: <DELL Dell UPS Rack 1920W HV, class 0/0, rev 1.10/1.00, addr 3> on usbus1 root at hq: # usbconfig ugen0.1: <EHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps)

Hello, I have a server pfsense in bridge mode to function as transparent FW, the problem is that once I connect the pfsense between my router core and my core switch catalyst a few seconds begin to appear several messages like these: em2: watchdog timeout - resetting em2: watchdog timeout - resetting em2: watchdog timeout - resetting em2: watchdog timeout - resetting And the connection falls

On Jan 31, 2014, at 3:14 PM, Chris Duffy wrote: > The current one I am looking is support for: > > Upsonic Commercial UPS CXR 2000 - 2000VA/1200W - Rack/Tower > > What seems to be supported in Freebsd is: Small clarification: the hardware compatibility list isn't broken down by operating system (theoretically, the drivers should work on any POSIX system, with additional

I have a samba server 1.9.18 in linux redhat 5.1 I use WinNt4 to see directory in the linux host. in windows nt, the command "net view" show "\\tahiti" the command "net view \\tahiti" show " l'erreur systeme 86 a eu lieu le mot de passe reseau sp?cifi? est incorrect" What is the solution? COUTEL Jean-Francois 01 40 90 30 50

I am working with a number of our customers to ensure that NUT works with different UPS's on Freebsd 9.1. The current one I am looking is support for: *Upsonic Commercial UPS CXR 2000 - 2000VA/1200W - Rack/Tower* What seems to be supported in Freebsd is: CXR1000 blazer_ser LAN Saver 600 genericups upstype=0 Power Guardian genericups upstype=7 PrOffice 650 USB blazer_usb DS-800 USB

On 2/5/14, 9:55 PM, Charles Lepple wrote: > On Feb 5, 2014, at 9:03 PM, Chris Duffy wrote: > >>> Please run this: >>> >>> /usr/local/libexec/nut/blazer_usb -a UPSonic -u root -D >>> >>> and send the output back to the list. >>> >> Output from the above command: >> >> 0.000000 debug level is '1' >>

I am having problems with mouse, keyboard and APC UPS. When attempting to start apcupsd I get the following error: Jan 8 17:42:06 Ace apcupsd[1606]: apcupsd FATAL ERROR in generic-usb.c at line 636 Cannot find UPS device -- For a link to detailed USB trouble shooting information, please see <http://www.apcupsd.com/support.html>. Jan 8 17:42:06 Ace apcupsd[1606]: apcupsd error shutdown

On Feb 6, 2014, at 8:41 AM, Chris Duffy wrote: > 0.016485 Trying megatec protocol... > 0.017411 send: Q1 > 0.252545 read: (244.4 244.4 229.9 028 50.0 2.19 23.1 00000001 > 0.252589 Status read in 1 tries > 0.252602 Supported UPS detected with megatec protocol > 1.288032 send: Unknown error > 1.288085 Permissions problem: Input/output error

I made the following devd script.. sh cd /tmp fetch mkdir /usr/local/etc/devd sed -Ene 's/SYSFS\{idVendor\}==\"(.*)\", SYSFS\{idProduct\}==\"(.*)\", MODE=.*/attach 100 {\ device-name "ugen[0-9]+";\ match "vendor" "0x\1";\ match "product" "0x\2";\ action "chown @RUN_AS_GROUP@

Hi Mr. Liu, Thanks for your quick reply. I compiled the code with the libclc_trunk and linked the bitcode file under $LIBCLC_DIR/built_libs/tahiti-amdgcn--.bc. After looking into the libclc, it is currently using the new workitem intrinsics (commit ba9858caa1e927a6fcc601e3466faa693835db5e). In the linked bitcode ($LIBCLC_DIR/built_libs/tahiti-amdgcn--.bc), it has the following code segment,

On 6/4/2017 4:46 PM, Charles Lepple wrote: [snip] >> 4) when I went down to 95 volts, the "AVR" kicked in to boost the >> voltage without going to battery. This was indicated by a "click" from >> the UPS and an indication on the UPS display. > > In non-explore mode, does the driver report the AVR status? (No need to set things back up if you have

hi folks: xorg caused my macbook 10,1 reboot immediately while startup X with latested nvidia-driver and event not to generate Xorg.0.log file attached my verbose message. thanks for any ideas --wsk -------------- next part -------------- Sep 20 15:40:31 rmbp syslogd: kernel boot file is /boot/kernel/kernel Sep 20 15:40:31 rmbp kernel: 2 Sep 20 15:40:31 rmbp kernel: MADT: Interrupt override:

Here are my permissions and user info. Let me know if there is anything else I should check pi at nutpi:~ $ ls -alt /etc/nut total 56 drwxr-xr-x 87 root root 4096 Jan 26 15:22 .. drwxr-xr-x 2 root nut 4096 Jan 26 13:53 . -rw-r----- 1 root nut 4719 Jan 26 13:15 upssched.conf -rw-r----- 1 root nut 15347 Jan 26 11:25 upsmon.conf -rw-r----- 1 root nut 1543 Jan 26 10:02 nut.conf -rw-r-----

Charles, Here is the output: ugen1.3: <USB UPS PPC> at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0200 bDeviceClass = 0x0000 bDeviceSubClass = 0x0000 bDeviceProtocol = 0x0000 bMaxPacketSize0 = 0x0008 idVendor = 0x06da idProduct = 0x0005 bcdDevice = 0x0003 iManufacturer = 0x0003 <PPC>

Here is the output root at nutpi:/etc/nut# ps -elf | grep -E '[n]ut|ups[dms]' 4 S avahi 246 1 0 80 0 - 1472 poll_s Jan26 ? 00:00:31 avahi-daemon: running [nutpi.local] 1 S nut 451 1 0 80 0 - 678 poll_s Jan26 ? 00:03:41 /lib/nut/upscode2 -a deltec-PRA1500 1 S nut 454 1 0 80 0 - 1173 poll_s Jan26 ? 00:00:28 /lib/nut/upsd 1

OS version: FreeBSD 8.4-RELEASE-p19 NUT version: nut-2.7.2_6 NUT installation method: from freebsd pkg system Device info: EATON 9SX 5000i, manufacturing date: 05.09.2014 ups.firmware: 9SX5Ki When i try to see battery charge, in output it have not such variable, and i can't control my server and other clients connected to them. Any options cannot power of server. How to see current battery