similar to: megatec_usb[17249]: Reconnecting to UPS failed; will retry later

Hello. I've been experimenting with the USB connection of an Ippon BackComfoPro 800. This is the device "06da:0003 Phoenixtec Power Co., Ltd". The current SVN version of NUT does not work with this device. The megatec_usb driver can't get a proper reply to a Q1 request, failing with an error message about "short read (14 bytes)" instead. I have found the reason for

ut 2.4.1 works with megatec_usb driver. It tries to interact with a device in /dev/bus/usb/X/Y, but there are root:root 664 access rights. When I try to set port /dev/hiddev0 with write access in config file, in strace there are no records about accessing /dev/hiddev, but still only /dev/bus/usb/X/Y How to explain such a behavior? execve("./megatec_usb",

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Good day to all. In one of the offices I'm administering there are about 15 UPS marked with the brand "Ippon BackPro". This brand is widely popular in Russian Federation, while by itself is a 'Made in PRC' megatec clone. Depending on the model this UPSes have got either one standard serial RS-232C interface (cheaper models like

Hi all! I have a ups Ippon smart power pro 2000. And it connects to my FreeBSD 7.2 x86 server throught usb. I'm try to setup it in nut with megatec_usb driver... But it is not recognizes ups. I'm try set productid and vendorid in ups.conf, but this is not help. Nut version 2.4.1 below i'm add output of lsusb, my ups.conf and /usr/local/libexec/nut/megatec_usb -a IPPON -DDD

Greetings Gentlemen, I have Mustek NetGuard 1000 UPS which is equivalent to Ippon SmartWinner 1000. I have tried to run several latest builds of NUT, but run megatec_usb driver still failed with my device. I hope the information below might help. Regards, Oleg Here is the information which may help: lsusb -v Bus 002 Device 002: ID 06da:0003 Phoenixtec Power Co., Ltd Device Descriptor:

Citeren Roman Mamedov <roman at rm.pp.ru>: >> Another useful thing would be to run the bundled driver on a Windows >> box while running 'usbsnoop' so that we can get an idea what it is >> doing. Maybe we're missing something here. I still would like to see that. > Keep in mind that the patched megatec_usb driver (which I use since > yesterday) can

I have an UPS, that claims to be IPPon Back Power Pro 700. I'm trying to connect it using USB. lsusb -v says: Bus 1 Device 3: ID 06da:0003 Phoenixtec Power Co., Ltd Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0

Hi, I've being using nut 2.2.2 (Debian Lenny) via megatec_usb driver for IPPON Back UPS 600. Then I upgraded to nut 2.4.3 (Debian Squeeze) with broken megatec_usb. I moved to blazer_usb, it connected IPPON. [myups] driver = blazer_usb port = /dev/usb/hiddev0 desc = "Local UPS" #from megatec.c: batteries[] = {{ 12.0, 9.0, 16.0, 9.7, 13.7, 0.0 },

Hi all! Maybe possible adds something in megatec_usb driver for normal working with ippon 2000? This is output for drivers megatec_usb and blazer_usb: =========================================================== gate# /usr/local/libexec/nut/megatec_usb -DDDD -a IPPON Network UPS Tools - Megatec protocol driver 1.6 (2.4.1) Serial-over-USB transport layer 0.10 debug level is '4' Checking

Hi friends! It is not any answer to my previous letter about problem with nut 2.4.1 and ippon smart power 2000 UPS with megatec_usb driver. Maybe any additional information needed? Please help, any required info i get. -- ? ?????????, vk mailto:vk at union-metall.ru

Hello! I'm trying to use nut with a Ippon Smart Winner 3000 UPS (http://shop.key.ru/photo/items/45535.jpg) which looks like a custom-labeled OEM model of the megatec branch. I tried both the megatec_usb and the blazer_usb drivers for it, with a obvious config section: [ippon] driver = blazer_usb port = auto vendorid = 06da productid = 0003 desc = "Ippon Smart Winner 3000" If I

Hi Alexey, Please post the output of 'lsusb' and 'megatec_usb -a sven_625 -u nut -DDDDD'. On Monday 15 June 2009 14:32:16 you wrote: > Package: nut > Version: 2.4.1-3 > Severity: normal > > I have a SVEN Pro+ 625 ups that uses megatec_usb driver. > In ups.conf I describe it like: > [sven_625] > driver = megatec_usb > port = auto > desc =

2010/10/18 Michael Eitelwein > Hi Arnaud > Hi Michael, > Yes, did test it without success. > can you please post the first 20 seconds running blazer_usb in debug mode, ie: $ sudo /lib/nut/blazer_usb -DDD -a cyberpower aside from fixing the megatec situation, ensuring that you'll be able to run the replacement is also to be considered ;-) now, for the megatec issue, we need

Hello again! Thanks to the precious help from Henning Brauer, I managed to solve an issue with my UPS (a rebranded UPS speaking in Ablerex-ese over USB). Under OpenBSD 4.3, the UPS was claimed by HID. Now that I recompiled the kernel, adding a USB_quirk, this is what I get when I insert the USB cable: ugen0 at uhub0 port 2 "UIS_ABLER USB to Serial" rev 1.00/1.00 addr 2 So far, so

Hey all, thanks for your work on nut. I recently got myself a new cheap UPS, and have thus far determined very little about it. I can run whatever you like to help identify and work with it. So far I've played around with various settings and have had some limited success with the megatec_usb driver (Debian testing version): ----ups.conf---- [plexus] driver=megatec_usb model=500VA mfr=Plexus

Hi, Just purchashed this UPS. The megatec_usb driver appears to be communicating with the UPS - however, the ups.status field always states "off" /usr/local/ups/bin/megatec_usb -a plexus -DD Network UPS Tools 2.2.1 - Megatec protocol driver 1.5.9 [megatec_usb] Carlos Rodrigues (c) 2003-2007 Serial-over-USB transport layer for Megatec protocol driver [megatec_usb] Andrey Lelikov (c)

Hi, Just purchashed this UPS. The megatec_usb driver appears to be communicating with the UPS - however, the ups.status field always states "off" /usr/local/ups/bin/megatec_usb -a plexus -DD Network UPS Tools 2.2.1 - Megatec protocol driver 1.5.9 [megatec_usb] Carlos Rodrigues (c) 2003-2007 Serial-over-USB transport layer for Megatec protocol driver [megatec_usb] Andrey Lelikov (c)

Hi everyone, I have a belkin ups that was bought around 2 months ago. It seems like the driver doesn't like the UPS, although on the website it's listed as supported. This is on a gentoo system with nut 2.2.1 . megatec_usb output: ---------SNIP---------- digamma nut # ./megatec_usb -a belkinm -DDDDDD Network UPS Tools 2.2.1 - Megatec protocol driver 1.5.9 [megatec_usb] Carlos Rodrigues

Hi! I am trying to get an Atlantis-Land 1501 UPS to work under OpenBSD. The UPS works OK under Linux + megatec_usb driver+nut_2.2.2. What I get under OpenBSD is: root at puffwall:~ # dmesg OpenBSD 4.3 (GENERIC) #698: Wed Mar 12 11:07:05 MDT 2008 deraadt at i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel Pentium III ("GenuineIntel" 686-class, 128KB L2

Hi! I am trying to get an Atlantis-Land 1501 UPS to work under OpenBSD. The UPS works OK under Linux + megatec_usb driver+nut_2.2.2. What I get under OpenBSD is: root at puffwall:~ # dmesg OpenBSD 4.3 (GENERIC) #698: Wed Mar 12 11:07:05 MDT 2008 deraadt at i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel Pentium III ("GenuineIntel" 686-class, 128KB L2