similar to: Feature Request: APCUPSD Support

Hi all, I just got myself 2 APC Back-UPS CS 350 I downloaded the stable nut tar.gz installed it. This is not the first time i install and configure nut so i used the same configuration as on my other server as i always did. Then i made the 2 required modification. I changed these 2 thing: driver = apcsmart port = /dev/hiddev0 # ls -al /dev/hiddev0 crw------- 1 nut nut 180, 96

Hello, Looking for a apcupsd 3.14.14 rpm. Been getting communication lost errors. I read there was a problem with the 3.14.12 version regarding a usb connection which I'm using, but has been corrected in 3.14.14. I found a Fedora 25 Rawhide src version, but the link must be bad. Was hoping I could rebuild it for Cento 6. Looks like apcupsd no longer producing the rpms. I could build one

On Dec 4, 2013, at 3:52 PM, Kris Jordan wrote: > Roger Price wrote, On 12/4/2013 12:35 PM: >> I would like nut to become more loquacious, and to log a much more complete report of its activity. At present nut reports that its components have started operation but does not automatically log their activity when UPS's switch between OB and OL. I believe that this under-reporting of

On Dec 16, 2014, at 9:45 AM, Frantz de Germain <frantz at info.univ-angers.fr> wrote: > Bye the way I just realize that I can't retrieve the ups.load, among other > thing :-( To the best of my knowledge, Microlink is not supported by any third-party tools (including NUT), but some variables are exposed via standard USB HID. Apparently, ups.load is not one of them. Your UPS might

John R Pierce wrote: > On 11/17/2017 7:16 AM, m.roth at 5-cent.us wrote: >> I can't seem to find apcupsd for C 6. Just went to epel's website, and >> not >> visible. Anyone have a clue? >> > > suggestion, use NUT instead, the Network UPS Tools....? works for all > sorts of UPS's, not just APC, and supports a master/slave sort of > network control

I need a little help on this problem, please? I include my /etc/apcupsd/apcupsd.conf file is attached. port 3551 udp/tcp has been added to the (running) firewall. My APC is recognized as: APC Back-UPS 450 FW:844.Kld.D USB FW:Kld This from the hardware browser. PS says: root 2419 0.0 0.0 4196 584 ? Ss Mar23 0:09 /sbin/apcupsd -f /etc/apcupsd/apcupsd.conf Is group 2419 the

I can't seem to find apcupsd for C 6. Just went to epel's website, and not visible. Anyone have a clue? mark

> -----Original Message----- > From: CentOS [mailto:centos-bounces at centos.org] On Behalf Of John R > Pierce > Sent: Saturday, December 24, 2016 7:44 PM > To: centos at centos.org > Subject: Re: [CentOS] apcupsd-3.14.14 > > On 12/24/2016 4:33 PM, TE Dukes wrote: > > Looking for a apcupsd 3.14.14 rpm. > > > > Been getting communication lost errors. I

Hello, I am working on getting NUT working with my Smart-UPS 900 UPS (with the C c= able) For several years, I have used the apcupsd product, but because of the nagios support for nut, I am working on switching over. Under apcupsd, I get tons of information from my UPS: # /usr/local/sbin/apcaccess status DATE : Sat Jul 09 12:56:41 CDT 2005 HOSTNAME : homer RELEASE : 3.8.6 UPSNAME :

Listmates, After wrangling with the voltage value on the CyberPower 1000AVRLCD and now having 2 of them working, I though it would be a simple matter to move my APC BP650 from apcupsd to nut so that all 3 servers would be monitored on the same web interface. The APC is attached to an older box running openSuSE 11.0 with nut-2.2.2-66.1. (nut-classic). The APC BP650 uses a serial connection

Hello;I just came across NUT, testing FreeNAS/FreeBSD. I?m running at home a APC UPS connected to another computer, running apcupsd. I found out that NUT didn't talk by default to apcupsd, and there was a driver created relatively recently (apcupsd-ups), which filled in that gap. The version I found on my FreeBSD/FreeNAS system seems to imply that there is more to come to that driver (0.04)

Does anyone here have any "feel" for the "Battery disconnected" and "Battery reattached" log entries? The rebooting came as a result of me turning off modems, router, external drives, monitor, cordless phone and finally, the computer, trying to locate a quiet but annoying "chirp". The "chirps" stopped when I tilted the UPS to look at the front

> Am 17.11.2017 um 17:36 schrieb m.roth at 5-cent.us: > > wwp wrote: >> On Fri, 17 Nov 2017 10:34:53 -0500 Digimer <lists at alteeve.ca> wrote: >> >>> On 2017-11-17 10:16 AM, m.roth at 5-cent.us wrote: >>>> I can't seem to find apcupsd for C 6. Just went to epel's website, and >>> not >>>> visible. Anyone have a clue?

Hello, On Fri, 17 Nov 2017 10:34:53 -0500 Digimer <lists at alteeve.ca> wrote: > On 2017-11-17 10:16 AM, m.roth at 5-cent.us wrote: > > I can't seem to find apcupsd for C 6. Just went to epel's website, and not > > visible. Anyone have a clue? > > > > mark > > I can't speak to epel, but we have copies of it if that helps you; >

Hi, I am trying to set up NUT on a mini-ITX system running OpenBSD 5.5. I have an APC Smart-UPS SC620 which runs perfectly well on Ubuntu, with nut-2.2.1. Ubuntu system uses ASUS motherboard. On mini-ITX system, I have Intel d2500cc motherboard with 4 serial ports. I've tested ports by connecting them with a null-modem cable and running cu in 2 terminals. Type in one terminal, output shows

Hello. Trouble to communicate with APC SmartUPS via serial port. UPS connected to the com1 port on windows host. Communication witch hyperterm works well. There is a log: YSM ^ASmart-UPS SC1000 n5S0713T63247 m03/29/07 L240.0 B27.10 apcupsd also can communicate with the UPS and works well. running apcsmart -a ups gives the following: com1: device reports different attributes than what were set

Hi, I installed apcupsd through pfsense and noticed some discrepancy with the NUT package. I'm not sure if this is a bug regarding the BATTDATE (apcupsd) and battery.date (NUT) but BATTDATE shows the correct date of 2016/05/11. While NUT shows the battery.date as 2001/09/25 which doesn't make sense. Any ideas? Pfsense 2.4.3-RELEASE-p1 (amd64) NUT 2.7.4_6 NUT installed through

On May 2, 2014, at 3:26 AM, Kastus Shchuka wrote: > Hi, > > I am trying to set up NUT on a mini-ITX system running OpenBSD 5.5. > > I have an APC Smart-UPS SC620 which runs perfectly well on Ubuntu, > with nut-2.2.1. Ubuntu system uses ASUS motherboard. > > On mini-ITX system, I have Intel d2500cc motherboard with 4 serial ports. > I've tested ports by connecting

Hi there, I am using an old (really old) APC Smart-UPS 600. It worked fine under apcupsd but when I tried NUT it did not work. The error I was getting was: sudo /lib/nut/apcsmart -DDD /dev/ttyS1 Network UPS Tools (version 2.0.4) - APC Smart protocol driver Driver version 1.99.8, command table version 2.0 debug level is '3' Attempting firmware lookup Firmware: [D4] Not found in

On 2014-01-14 10:12, dstrr wrote: > Hello. > Trouble to communicate with APC SmartUPS via serial port. > UPS connected to the com1 port on windows host. > Communication witch hyperterm works well. > There is a log: > > YSM > ^ASmart-UPS SC1000 > n5S0713T63247 > m03/29/07 > L240.0 > B27.10 > > apcupsd also can communicate with the UPS and works well. >